SNOPIŃSKI, Przemysław; TAŃSKI, Tomasz; MATUS, Krzysztof a RUSZ, Stanislav. Microstructure, grain refinement and hardness of Al-3%Mg aluminium alloy processed by ECAP with helical die. Online.
Archives of Civil and Mechanical Engineering. 2019, roč. 19, č. 2, s. 287-296. ISSN 1644-9665. Dostupné z:
https://www.sciencedirect.com/science/article/pii/S1644966518301304.
Detail DUTKIEWICZ, Jan; RUSZ, Stanislav; HILŠER, Ondřej; TAŃSKI, Tomasz; BOREK, Wojciech; SZLEZYNGER, Maciej; BOBROWSKI, Piotr a MAZIARZ, Wojciech. Structure of MgLiAl alloys after various routes of severe plastic deformation studied by TEM. Online.
International journal of materials research. 2019, roč. 110, č. 1, s. 24-31. ISSN 1862-5282. Dostupné z:
https://www.hanser-elibrary.com/doi/abs/10.3139/146.111680.
Detail ŠOFER, Michal; KUČERA, Pavel; MAZANCOVÁ, Eva a KREJČÍ, Lucie. Acoustic Emission and Fractographic Analysis of Seamless Steel Pressure Cylinders with Artificial Flaws Under Hydrostatic Burst Testing. Online.
Journal of Nondestructive Evaluation. 2019, roč. 38, č. 3, s. 1-13. ISSN 0195-9298. Dostupné z:
https://link.springer.com/article/10.1007%2Fs10921-019-0627-0#citeas.
Detail KOZÁK, Jindřich; KREJČÍ, Lucie; HLAVATÝ, Ivo; SAMARDŽIČ, Ivan a ČEP, Robert. AN ANALYSIS OF STRUCTURES OCCURRING IN WELD DEPOSIT OF STEEL S235JR N WITH TUNGSTEN CARBIDE PARTICLES AND MARTENSITIC MATRIX. Online.
Metalurgija. 2019, roč. 58, č. 3-4, s. 235-238. ISSN 0543-5846. Dostupné z:
https://hrcak.srce.hr/index.php?show=clanak&id_clanak_jezik=318824.
Detail MALOTOVÁ, Šárka; ČEP, Robert; ZLÁMAL, Tomáš; MOHYLA, Petr; CZAN, Andrej; ANTIC, Aco; BUDAK, Igor a MIRCEA, Lobontiu. Evaluation of Residual Stresses after Irregular Interrupted Machining. Online.
Tehnički vjesnik – Technical Gazette. 2019, roč. 25, č. 4, s. 1009-1013. ISSN 1330-3651. Dostupné z:
http://hhttps://www.researchgate.net/publication/327385283_Evaluation_of_Residual_Stresses_after_Irregular_Interrupted_Machi.
Detail RUDAWSKA, Anna; MALCZARSKI, Mateusz; STANCEKOVA, Dana; WAHAB, Magd Abdel a SCHINDLEROVÁ, Vladimíra. MECHANICAL PROPERTIES OF HAND-MAKING POLYESTER COMPOSITES. Online.
Advances in science and technology-research journal. 2018, roč. 12, č. 2, s. 112-120. ISSN 2299-8624. Dostupné z:
http://www.astrj.com/MECHANICAL-PROPERTIES-OF-HAND-MAKING-POLYESTER-COMPOSITES,91891,0,2.html.
Detail MICIAN, M.; KONAR, R.; HLAVATÝ, Ivo; WINCZEK, J. a GUCWA, M.. The Repair of Foundry Defects in Steel Castings Using Welding Technology.
Archives of Foundry Engineering. 2018, roč. 18, č. 2, s. 177-180. ISSN 1897-3310.
Detail DUTKIEWICZ, Jan; RUSZ, Stanislav; KUC, Dariusz; HILŠER, Ondřej; BOBROWSKI, Piotr a KANIA, Bogusz. Microstructure and texture changes of MgLiAl alloys composed of α or α + β phases after twist channel angular pressing (TCAP). Online.
Archives of Metallurgy and Materials. 2018, roč. 63, č. 4, s. 1827-1835. ISSN 1733-3490. Dostupné z:
http://www.imim.pl/files/archiwum/Vol4_2018/33.pdf.
Detail KOWALCZYK, Karolina; JABLOŃSKA, Magdalena; RUSZ, Stanislav a JUNAK, Grzegorz. Influence of recrystallization annealing on the properties and structure of low-carbon ferritic steel if. Online.
Archives of Metallurgy and Materials. 2018, roč. 63, č. 4, s. 1957-1961. ISSN 1733-3490. Dostupné z:
http://www.imim.pl/files/archiwum/Vol4_2018/52.pdf.
Detail KOWALCZYK, Karolina; JABLOŃSKA, Magdalena; RUSZ, Stanislav a BEDNARCZYK, Iwona. Influence of the Drece process of severe plastic deformation on the mechanical properties of the ultra-low carbon interstitial free steel. Online.
Archives of Metallurgy and Materials. 2018, roč. 63, č. 4, s. 2095-2100. ISSN 1733-3490. Dostupné z:
http://www.imim.pl/files/archiwum/Vol4_2018/70.pdf.
Detail MICHALSKI, Jakub; TILL, Jakub; PETRŮ, Jana; RUSZ, Stanislav; HILŠER, Ondřej a VONTOROVÁ, Jiřina. AZ31 magnesium alloy subjected to severe plastic deformation at different temperatures: Microstructure and hardness.
IOP Conference Series: Materials Science and Engineering. Volume 385. 2018, roč. 461, č. 1, s. 1-6. ISSN 1757-8981.
Detail FUGLÍČEK, Ladislav. Production enhancement through using a continuous system of winding electric machines.
MM Science Journal. 2018, roč. 2018, č. June, s. 2358-2362. ISSN 1803-1269.
Detail HILŠER, Ondřej; RUSZ, Stanislav; SZKANDERA, Pavel; ČÍŽEK, Lubomír; KRAUS, Martin; DŽUGAN, Jan a MAZIARZ, Wojciech. Study of the Microstructure, Tensile Properties and Hardness of AZ61 Magnesium Alloy Subjected to Severe Plastic Deformation. Online.
Metals. 2018, roč. 8, č. 10, s. 1-16. ISSN 2075-4701. Dostupné z:
https://www.mdpi.com/2075-4701/8/10/776.
Detail DUTKIEWICZ, Jan; BOBROWSKI, Piotr; RUSZ, Stanislav; HILŠER, Ondřej; TANSKI, Tomasz A.; BOREK, Wojciech; LAGODA, Marek; OSTACHOWSKI, Pawel; PALKA, Pawel; BOCZKAL, Grzegorz; KUC, Dariusz a MIKUSZEWSKI, Tomasz. Effect of Various SPD Techniques on Structure and Superplastic Deformation of Two Phase MgLiAl Alloy. Online.
Metals and Materials International. 2018, roč. 24, č. 5, s. 1077-1089. ISSN 1598-9623. Dostupné z:
https://link.springer.com/article/10.1007/s12540-018-0118-3.
Detail RUSZ, Stanislav; HILŠER, Ondřej; TYLŠAR, Stanislav; ČÍŽEK, Lubomír; TAŃSKI, Tomasz a MAZIARZ, Wojciech. The influence of severe plastic deformation process on structure and properties of AZ 31 alloy after selected heat treatment.
Solid State Phenomena. Volume 258. 2018, roč. 275, č. 1, s. 134-146. ISSN 1012-0394.
Detail PFEIFER, Marcel Rolf. Rapid Prototyping Technologies for Manufacturing and Maintenance Activities.
Technologické inžinierstvo. 2018, roč. 14, č. 2/2017, s. 30-32. ISSN 1336-5967.
Detail MALOTOVÁ, Šárka; ČEP, Robert; ZLÁMAL, Tomáš; MOHYLA, Petr; CZÁN, Andrej; ANTIC, Aco; BUDAK, Igor a MIRCEA, Lobontiu. Evaluation of Residual Stresses after Irregular Interrupted Machining. Online.
Tehnički vjesnik – Technical Gazette. 2018, roč. 25, č. 4, s. 1009-1013. ISSN 1330-3651. Dostupné z:
https://hrcak.srce.hr/204446.
Detail HLAVATÝ, Ivo; HÁJKOVÁ, Petra; KREJČÍ, Lucie a ČEP, Robert. Electric Resistance Welding of Austenitic and Galva nized Steel Sheets.
Tehnički vjesnik – Technical Gazette. 2018, roč. 25, č. 5, s. 1274-1277. ISSN 1330-3651.
Detail LEHOCKA, Dominika; KLICH, Jiří; BOTKO, František; FOLDYNA, Josef; HLOCH, Sergej; KEPIC, Jan; KOVAL', K; KREJČÍ, Lucie a ŠTORKÁN, Zdeněk. Pulsating water jet erosion effect on a brass flat solid surface. Online.
The international journal of advanced manufacturing technology. 2018, roč. 97, č. 1-4, s. 1099-1112. ISSN 0268-3768. Dostupné z:
https://link.springer.com/article/10.1007%2Fs00170-018-1882-4.
Detail VONTOROVÁ, Jiřina a MOHYLA, Petr. Use of GDOES method for evaluation of the quality and thickness of hot dip galvanised coating.
Transactions of the Institute of Metal Finishing. 2018, roč. 96, č. 6, s. 313-318. ISSN 0020-2967.
Detail DUTKIEWICZ, J.M.; RUSZ, Stanislav; KUC, D.; HILŠER, Ondřej; PAŁKA, P. a BOCZKAL, G.. Superplastic deformation of two phase MgLiAl alloy after TCAP pressing.
Acta Metallurgica Slovaca. 2017, roč. 23, č. 3, s. 215-221. ISSN 1335-1532.
Detail HILŠER, Ondřej; RUSZ, Stanislav; MAZIARZ, W; DUTKIEWICZ, J.; TAŃSKI, T.; SNOPIŃSKI, P. a DŽUGAN, J. Structure and properties of AZ31 magnesium alloy after combination of hot extrusion and ECAP.
Acta Metallurgica Slovaca. 2017, roč. 23, č. 3, s. 222-228. ISSN 1335-1532.
Detail DUTKIEWICZ, Jan; RUSZ, Stanislav; MAZIARZ, Wojciech; SKUZA, Wojciech; KUC, Dariusz a HILŠER, Ondřej. Modification of Microstructure and Properties of Extruded Mg–Li–Al Alloys of α and α β Phase Composition using ECAP Processing.
Acta Physica Polonica A. 2017, roč. 131, č. 5, s. 1303-1306. ISSN 0587-4246.
Detail SCHINDLEROVÁ, Vladimíra a ŠAJDLEROVÁ, Ivana. INFLUENCE TOOL WEAR IN MATERIAL FLOW.
Advances in science and technology-research journal. 2017, roč. 11, č. 1, s. 161-165. ISSN 2299-8624.
Detail SNOPIŃSKI, Przemysław; TAŃSKI, Tomasz; HILŠER, Ondřej a LUBOS, Adam. Effect of ECAP process on structure and hardness of AlMg3 aluminium alloy.
Archives of Materials Science and Engineering. 2017, roč. 84, č. 2, s. 79-85. ISSN 1897-2764.
Detail ČÍŽEK, Lubomír; RUSZ, Stanislav; HILŠER, Ondřej; SLIWA, Romana Ewa; KUC, Dariusz; TAŃSKI, Tomasz a MAREK, Tkocz. Microstructure and properties of selected magnesium-aluminum alloys prepared for spd processing technology.
Archives of Metallurgy and Materials. 2017, roč. 62, č. 4, s. 2365-2370. ISSN 1733-3490.
Detail VONTOROVÁ, Jiřina; DOBIAS, Vaclav a MOHYLA, Petr. Utilization of GDOES for the study of friction layers formed on the surface of brake discs during the friction process.
Chemical Papers. 2017, roč. 71, č. 8, s. 1507-1514. ISSN 0366-6352.
Detail RUSZ, Stanislav; SALAJKA, Michal; DŽUGAN, Jan; HILŠER, Ondřej; BOŘUTA, Josef; PASTRŇÁK, Martin a ŠVEC, Jiří. Development of geometry of forming tools for extrusion of strip sheet by SPD process.
IOP Conference Series: Materials Science and Engineering. Volume 179. 2017, roč. 179, č. 1, s. 1-11. ISSN 1757-8981.
Detail HILŠER, Ondřej; RUSZ, Stanislav; TAŃSKI, Tomasz; SNOPIŃSKI, Przemysław; DŽUGAN, Jan a KRAUS, Martin. Mechanical properties and structure of AZ61 magnesium alloy processed by equal channel angular pressing.
IOP Conference Series: Materials Science and Engineering. Volume 179. 2017, roč. 179, č. 1, s. 1-7. ISSN 1757-8981.
Detail MOHYLA, Petr; HLAVATÝ, Ivo; HRUBÝ, Jiří a KREJČÍ, Lucie. Investigation of Heat Affected Zone of Steel P92 Using the Thermal Cycle Simulator.
International Journal of Materials and Metallurgical Engineering. Volume 11. 2017, roč. 6, č. 11, s. 460-463. ISSN 1307-6892.
Detail ČADA, Radek; FRYDRÝŠEK, Karel; SEJDA, František; DEMEL, Jiří a PLEVA, Leopold. Analysis of Locking Self-Taping Bone Screws for Angularly Stable Plates.
Journal of Medical and Biological Engineering. 2017, roč. 37, č. 4, s. 612-625. ISSN 1609-0985.
Detail BOHÁČIK, Michal; MIČIAN, Miloš; KOŇÁR, Radoslav a HLAVATÝ, Ivo. Ultrasonic testing of butt weld joint by TOFD technique.
Manufacturing Technology. 2017, roč. 17, č. 6, s. 842-847. ISSN 1213-2489.
Detail HILŠER, Ondřej; RUSZ, Stanislav; MAZIARZ, Wojciech; CHULIST, Robert; DUTKIEWICZ, Jan; ČÍŽEK, Lubomír; KRAUS, Martin a TAŃSKI, Tomasz. Grain refinement of AZ61 alloy after ECAP processing.
Materials science forum. Volume 891. 2017, roč. 891, č. 1, s. 372-376. ISSN 0255-5476.
Detail TAŃSKI, Tomasz; SNOPIŃSKI, Przemysław a HILŠER, Ondřej. Microstructure and mechanical properties of two binary Al-Mg alloys deformed using equal channel angular pressing.
Materialwissenschaft und Werkstofftechnik. 2017, roč. 48, č. 5, s. 439-446. ISSN 0933-5137.
Detail MOHYLA, Petr; HAVELKA, Lukáš; SCHMIDOVÁ, Eva a VONTOROVÁ, Jiřina. Mechanical Properties of Steel P92 Welded Joints Obtained By TIG Technology.
Metal Science and Heat Treatment. 2017, roč. 59, č. 7-8, s. 540-542. ISSN 0026-0673.
Detail HLAVATÝ, Ivo; KOZÁK, Jindřich; KREJČÍ, Lucie; SAMARDZIC, Ivan a TUOMINEN, Jari. THE EFFECT OF TUNGSTEN CARBIDE PARTICLES CONTENT IN A WELD DEPOSIT ON ITS ABRASION RESISTANCE.
Tehnički vjesnik – Technical Gazette. 2017, roč. 24, č. 5, s. 1345-1349. ISSN 1330-3651.
Detail MICIETOVA, Anna; NESLUSAN, Miroslav; ČEP, Robert; OCHODEK, Vladislav; MICIETA, Branislav a PAGÁČ, Marek. DETECTION OF GRINDING BURN THROUGH THE HIGH AND LOW FREQUENCY BARKHAUSEN NOISE.
Tehnički vjesnik – Technical Gazette. 2017, roč. 24, č. Supplement 1, s. 71-77. ISSN 1330-3651.
Detail HILŠER, Ondřej; RUSZ, Stanislav; KREJČÍ, Lucie a ŠPALEK, František. Grain refinement of extruded AZ31 magnesium alloy by ECAP process.
Transactions of the VŠB - Technical University of Ostrava, Mechanical Series. 2017, roč. 63, č. 1, s. 31-37. ISSN 1210-0471.
Detail ŠVEC, Jiří; RUSZ, Stanislav; HILŠER, Ondřej; OCHODEK, Vladislav a KREJČÍ, Lucie. Mechanical properties of steel DC01 formed by DRECE method.
Transactions of the VŠB - Technical University of Ostrava, Mechanical Series. 2017, roč. 63, č. 1, s. 63-72. ISSN 1210-0471.
Detail VALÍČEK, Jan; HARNIČÁROVÁ, Marta; PANDA, A; HLAVATÝ, Ivo; KUŠNEROVÁ, Milena; TOZAN, Hakan; YAGIMLI, Mustafa a VÁCLAVÍK, Vojtěch. Mechanism of creating the topography of an abrasive water jet cut surface.
Advanced Structured Materials. Volume 61. 2016, roč. 61, č. 1, s. 111-120. ISSN 1869-8433.
Detail TAŃSKI, Tomasz; SNOPIŃSKI, Przemyslaw; PAKIEŁA, Wojciech; BOREK, Wojciech; PRUSIK, Krystian a RUSZ, Stanislav. Structure and properties of AlMg alloy after combination of ECAP and post-ECAP ageing.
Archives of Civil and Mechanical Engineering. 2016, roč. 16, č. 3, s. 325-334. ISSN 1644-9665.
Detail SNOPINSKI, Przemyslaw; TANSKI, Tomasz; LABISZ, Krzysztof; RUSZ, Stanislav; JONŠTA, Petr a KROL, Mariusz. Wrought aluminium-magnesium alloys subjected to SPD processing.
International journal of materials research. 2016, roč. 107, č. 7, s. 637-645. ISSN 1862-5282.
Detail VALÍČEK, Jan; HARNIČÁROVÁ, Marta; HLAVATÝ, Ivo; GRZNÁRIK, Radovan; KUŠNEROVÁ, Milena; HUTYROVÁ, Zuzana a PANDA, Anton. A new approach for the determination of technological parameters for hydroabrasive cutting of materials.
Materialwissenschaft und Werkstofftechnik. 2016, roč. 47, č. 5-6, s. 462-471. ISSN 0933-5137.
Detail SCHINDLEROVÁ, Vladimíra; ŠAJDLEROVÁ, Ivana a ZMEŠKAL, Pavel. Implementation of the Principles of TPM in Field of Maintenance Preparations.
Sborník vědeckých prací Vysoké školy báňské-Technické univerzity Ostrava, Řada strojní. 2016, roč. LXII, č. 1, s. 51-57. ISSN 1210-0471.
Detail SCHMIDOVA, Eva; HLAVATÝ, Ivo a HANUS, Petr. THE WELDABILITY OF THE STEEL WITH HIGH MANGANESE.
Tehnički vjesnik – Technical Gazette. 2016, roč. 23, č. 3, s. 749-752. ISSN 1330-3651.
Detail LEHOCKA, Dominika; HLAVATÝ, Ivo a HLOCH, Sergej. RATIONALIZATION OF MATERIAL FLOW IN PRODUCTION OF SEMITRAILER FRAME FOR AUTOMOTIVE INDUSTRY.
Tehnički vjesnik – Technical Gazette. 2016, roč. 4, č. 23, s. 1215-1220. ISSN 1330-3651.
Detail HILŠER, Ondřej; RUSZ, Stanislav; ČADA, Radek; SALAJKA, Michal a DUTKIEWICZ, Jan. Influence of Severe Plastic Deformation on Mechanical Properties and Structure of Aluminium Alloys.
Transactions of the VŠB - Technical University of Ostrava, Mechanical Series. 2016, roč. 62, č. 1, s. 25-37. ISSN 1210-0471.
Detail RUSZ, Stanislav; ČÍŽEK, Lubomír; MICHENKA, Vít; DUTKIEWICZ, Jan; SALAJKA, Michal; HILŠER, Ondřej; TYLŠAR, Stanislav; KEDROŇ, Jan a KLOS, Marcel. New Type of Device for Achievement of Grain Refinement in Metal Strip.
Advanced Materials Research. 2015, roč. 1127, s. 91-97. ISSN 1662-8985.
Detail SONDEL, Martin; KOUKAL, Jaroslav; SCHWARZ, David a SCHWARZ, Drahomír. Evaluation of Secondary Hardening and Microstructure in the Real T24 Steel Weld Joint.
Advanced materials research. Volume 1111. 2015, roč. 1111, č. 2015, s. 151-156. ISSN 1022-6680.
Detail HILŠER, Ondřej; RUSZ, Stanislav; SALAJKA, Michal a ČÍŽEK, Lubomír. Evaluation of the deep-drawing steel sheets processed by DRECE device.
Archives of Materials Science and Engineering. 2015, roč. 68, č. 1, s. 31-35. ISSN 1897-2764.
Detail RUSZ, Stanislav; KŁYSZEWSKI, Andrzej; SALAJKA, Michal; HILŠER, Ondřej; ČÍŽEK, Lubomír a KLOS, Marcel. Possibilities of Application Methods Drece in Forming of Non-Ferrous Metals.
Archives of Metallurgy and Materials. 2015, roč. 60, č. 4, s. 3011-3016. ISSN 1733-3490.
Detail GREGUŠOVÁ, Markéta; SCHINDLEROVÁ, Vladimíra; ŠAJDLEROVÁ, Ivana; MOHYLA, Petr a KEDROŇ, Jan. Practical Apllication of Simulation of Business Processes.
International Journal of Social, Education, Economics and Management Engineering. 2015, roč. 9, č. 2, s. 424-429. ISSN 1307-6892.
Detail LESŇÁK, Michal; STANĚK, František; HLAVATÝ, Ivo; PIŠTORA, Jaromír a PROCHÁZKA, Jan. SPR Method and Its Utilisation for Low Alcohols Concentrations Determination.
Journal of Modern Physics. 2015, roč. 6, č. 4, s. 363-368. ISSN 2153-120X.
Detail HRUBÝ, Jiří; SCHINDLEROVÁ, Vladimíra a RENTKA, Josef. Degradation Processes in the Contact Layers of Forming Tools.
Manufacturing Technology. 2015, roč. 15, č. 5, s. 836-842. ISSN 1213-2489.
Detail TAŃSKI, Tomasz; KRÓL, Mariusz; SNOPIŃSKI, Przemysław; ROSZAK, Marek; RUSZ, Stanislav a PALČEK, Peter. Thermal and structure analysis of the aluminium ENAC-AlMg5Si2Mn alloy.
Materials Engineering. 2015, roč. 22, č. 4, s. 54-66. ISSN 1335-0803.
Detail MARŠÁL, Robert; PODJUKLOVÁ, Jitka; SIOSTRZONEK, René; PAVELKOVÁ, Daniela; KOLDOVÁ, Lenka a PĚNIČKA, Zdeněk. CORROSION OF DRY - BOTTOM BOILER EVAPORATOR IN POWER INDUSTRY.
Materials Science Forum. 2015, roč. 818, č. May 2015, s. 129-132. ISSN 1662-9752.
Detail SIOSTRZONEK, René; PAVELKOVÁ, Daniela; KOLDOVÁ, Lenka; PODJUKLOVÁ, Jitka a STRZYŽ, Petr. CORROSION PROTECTION OF STRUCTURAL STEELWORK BY A DUPLEX COATING SYSTEM.
Materials Science Forum. 2015, roč. 818, č. May 2015, s. 162-166. ISSN 1662-9752.
Detail HANÁK, Miroslav; PODJUKLOVÁ, Jitka; SIOSTRZONEK, René; PAVELKOVÁ, Daniela a KOLDOVÁ, Lenka. THE INFLUENCE OF SUBSTRATE SURFACE CLEANLINESS ON THE CORROSION RESISTANCE OF COATING SYSTEMS.
Materials Science Forum. 2015, roč. 818, č. May 2015, s. 167-170. ISSN 1662-9752.
Detail PAVELKOVÁ, Daniela; KOLDOVÁ, Lenka; PODJUKLOVÁ, Jitka; SIOSTRZONEK, René; PĚNIČKA, Zdeněk a MENSHIKOV, Vladimír. SHORT-TERM CORROSION PROTECTION MATERIALS USING NANOCOATINGS.
Materials Science Forum. 2015, roč. 818, č. May 2015, s. 89-92. ISSN 1662-9752.
Detail LAJCZYKOVÁ, Markéta; KOUKAL, Jaroslav a SONDEL, Martin. Zákonné povinnosti, kvalifikační a technické požadavky na výrobce stavebních konstrukcí podle EN 1090-1 A1.
Svět svaru. 2015, roč. 3, č. 2015, s. 21-28. ISSN 1214-4983.
Detail HLAVATÝ, Ivo; KOZÁK, Jindřich; KREJČÍ, Lucie a SAMARDŽIĆ, Ivan. The Effect of Tungsten Carbide Participles Content in Weld Deposit on its Abrasion Resistance.
Tehnički vjesnik – Technical Gazette. 2015, roč. 23, č. 03/2016, s. 25-31. ISSN 1330-3651.
Detail BOREK, Wojciech; CZAJA, Małgorzata; LABISZ, Krzyszfof Marek; TAŃSKI, Tomasz; KRUPIŃSKI, Mariusz a RUSZ, Stanislav. High manganese austenitic X6MnSiAlNbTi26-3-3 steel - characteristic, Structures and Properties.
Advanced Materials Research. Volume 1036. 2014, roč. 1036, s. 18-23. ISSN 1022-6680.
Detail HLAVATÝ, Ivo. Technické vzdělání na Fakultě strojní VŠB - TU Ostrava versus praxe.
All For Power. 2014, roč. 8, č. 3, s. 74-76. ISSN 1802-8535.
Detail TAŃSKI, Tomasz; DOBRZAŃSKI, Leszek; RUSZ, Stanislav; MATYSIAK, Wojciech a KRAUS, Martin. Characteristic features of fine-grained coatings deposited on magnesium alloys.
Archives of Materials Science and Engineering. 2014, roč. 66, č. 1, s. 13-20. ISSN 1897-2764.
Detail OCHODEK, Vladislav a BOXAN, Pavel. Weldability of carbon steel processed by multiple plastic deformation.
Archives of Materials Science and Engineering. 2014, roč. 69, č. 2, s. 88-93. ISSN 1897-2764.
Detail RUSZ, Stanislav; SALAJKA, Michal; ČÍŽEK, Lubomír; TYLŠAR, Stanislav; KEDROŇ, Jan; MICHENKA, Vít; DONIČ, Tibor; HADASIK, Eugenius a KLOS, Marcel. Ultrafine grain refinement of AlMn1Cu and AZ31 alloys by SPD process.
Archives of Metallurgy and Materials. 2014, roč. 59, č. 1, s. 359-364. ISSN 1733-3490.
Detail VONTOROVÁ, Jiřina a MOHYLA, Petr. Studium zinkové vrstvy na plechu po tepelném ovlivnění pájením.
Hutnické listy. 2014, roč. 67, č. 6, s. 67-72. ISSN 0018-8069.
Detail ČEP, Robert; JANÁSEK, Adam; PETRŮ, Jana; SADÍLEK, Marek; MOHYLA, Petr; VALÍČEK, Jan; HARNIČÁROVÁ, Marta a CZAN, Andrej. Surface roughness after machining and influence of feed rate on process.
Key engineering materials. Volume 581. 2014, roč. 581, č. 1, s. 341-347. ISSN 1013-9826.
Detail KONAR, Radoslav; MIČIAN, Miloš a HLAVATÝ, Ivo. Defect detection in pipelines during operation using magnetic flux leakage and phased array ultrasonic method.
Manufacturing Technology. 2014, roč. 14, č. 3, s. 337-341. ISSN 1213-2489.
Detail MOHYLA, Petr; KUBOŇ, Zdeněk; ČEP, Robert a SAMARDZIC, Ivan. Evaluation of Creep Properties of Steel P92 and its Welded Joint.
Metalurgija. 2014, roč. 53, č. 2, s. 175-178. ISSN 0543-5846.
Detail MOHYLA, Petr; KUBOŇ, Zdeněk; ČEP, Robert; JANÁSEK, Adam a SAMARDZIC, Ivan. Secondary Hardening of Low-Alloyed Creep-Resistant Steel Welds.
Metalurgija. 2014, roč. 53, č. 1, s. 25-28. ISSN 0543-5846.
Detail HLOCH, Sergej; HLAVÁČEK, Jiří; VASILKO, Karol; CARÁCH, Ján; SAMARDŽĆ, Ivan; KOZAK, Dražan; HLAVATÝ, Ivo; ŠČUČKA, Jiří; KLICH, Jiří a KLICHOVÁ, Dagmar. Abrasive WaterJet (AWJ) Titanium Tangential Turning Evaluation.
Metalurgija. 2014, roč. 53, č. 4, s. 537-540. ISSN 0543-5846.
Detail RUSZ, Stanislav; ČÍŽEK, Lubomír; DUTKIEWICZ, Jan; TYLŠAR, Stanislav; SALAJKA, Michal; DIVIN, Václav; KEDROŇ, Jan a KLOS, Marcel. Rozdrobnienie ziarna stopu AlMn1Cu przez duże odkształcenie plastyczne (SPD).
Obrobka Plastyczna Metali. 2014, roč. 25, č. 2, s. 1-12. ISSN 0867-2628.
Detail GU, Chengfan; TOTH, Laszlo; RUSZ, Stanislav a BOVA, Miroslav. Texture induced grain coarsening in severe plastic deformed low carbon steel.
Scripta materialia. 2014, roč. 86, č. 1, s. 36-39. ISSN 1359-6462.
Detail SCHWARZ, Drahomír a HLAVATÝ, Ivo. Svařování plazmovým obloukem.
Svět svaru. 2014, roč. 1, č. 1/2014, s. 7-11. ISSN 1214-4983.
Detail HLAVATÝ, Ivo. Řezání plazmou.
Svět svaru. 2014, roč. 1, č. 1, s. 8-9. ISSN 1214-4983.
Detail ČADA, Radek a TILLER, Petr. Evaluation of draw beads influence on intricate shape stamping drawing process.
Technologické inžinierstvo. 2014, roč. 9, č. 1, s. 5-10. ISSN 1336-5967.
Detail MOHYLA, Petr a STERNADELOVÁ, Kristýna. Vlastnosti svarových spojů oceli 10CrWMoVNb9-2 v závislosti na režimu tepelného zpracování po svaření.
All For Power. 2013, č. 5, s. 140-144. ISSN 1802-8535.
Detail ČÍŽEK, Lubomír; RUSZ, Stanislav; SALAJKA, Michal; LEGERSKI, Miroslav; TANSKI, Thomas a HADASIK, Eugenius. The mathematical model of the mean flow stress for MgAl3Zn1Mn magnesium alloy.
Archives of Materials Science and Engineering. 2013, roč. 61, č. 1, s. 5-12. ISSN 1897-2764.
Detail KEDROŇ, Jan; ŽUROVEC, Marek a TYLŠAR, Stanislav. Využití programu Simufact.Forming pro optimalizaci procesu zápustkového kování.
Kovárenství. 2013, roč. 47, č. květen, s. 110-113. ISSN 1213-9289.
Detail HRUBÝ, Jiří; RENTKA, Josef; SCHINDLEROVÁ, Vladimíra; KREJČÍ, Lucie a ŠEVČÍKOVÁ, Xenie. Possibilities of prediction of service life of forming tools.
Manufacturing Technology. 2013, roč. 12, č. 14, s. 178-181. ISSN 1213-2489.
Detail MUSZTYFAGA, Malgorzata; DOBRZANSKI, Leszek; RUSZ, Stanislav; PROKOP, Lukáš a MIŠÁK, Stanislav. Application of modern technique to set the parameters of the monocrystalline solar cell and its structure.
Przeglad elektrotechniczny. 2013, roč. 89, č. 11, s. 24-26. ISSN 0033-2097.
Detail RUSZ, Stanislav; KEDROŇ, Jan; TYLŠAR, Stanislav; SALAJKA, Michal a BRUMAR, Tomáš. Use of numerical simulations at optimization of technological processes of cold bulk forming.
Sborník vědeckých prací Vysoké školy báňské - Technické univerzity Ostrava. Řada strojní. 2013, roč. LVIII, č. 1, s. 175-181. ISSN 1210-0471.
Detail SCHINDLEROVÁ, Vladimíra. The use of ergonomics to streamline processes.
Technologické inžinierstvo. 2013, roč. 10, č. 1/2013, s. 27-29. ISSN 1336-5967.
Detail ČEP, Robert; JANÁSEK, Adam; ČEPOVÁ, Lenka; PETRŮ, Jana; HLAVATÝ, Ivo; CAR, Zlatan a HATALA, Michal. EXPERIMENTAL TESTING OF EXCHANGEABLE CUTTING INSERTS CUTTING ABILITY.
Tehnički vjesnik – Technical Gazette. 2013, roč. 20, č. 1, s. 21-26. ISSN 1330-3651.
Detail ČADA, Radek a ZLÁMALÍK, Jan. Project of economically profitable technological process of production of rotor and stator plates of inductive position sensor by blanking and with the use of bending rolls.
Transactions of the VŠB - Technical University of Ostrava, Mechanical Series. 2013, roč. 59, č. 2, s. 27-38. ISSN 1210-0471.
Detail