KOŘÍNEK, Michal; HALAMA, Radim; HAJNYŠ, Jiří a STŘÍLKA, Dušan. Determination of the Initial Anisotropy of Inconel 718 manufactured by Additive Manufacturing. In: EAN 2023 - 61st Conference on Experimental Stress Analysis, Proceedings of Full Papers. 2024. s. 102-106. ISBN 978-80-553-3677-0.
Detail

ČAPEK, Jiří; TROJAN, Karel; HALAMA, Radim; GANEV, Nikolaj; HAJNYŠ, Jiří; KOŘÍNEK, Michal a KOLAŘÍK, Kamil. Residual Stress Analysis of Additively Manufactured AlSi10Mg Alloy. In: EAN 2023 - 61st Conference on Experimental Stress Analysis, Proceedings of Full Papers. 2024. s. 22 – 26. ISBN 978-80-553-3677-0.
Detail

HALAMA, Radim; CIENCIALA, Jakub; NATARAJAN, Ajay Vignesh a HAJNYŠ, Jiří. Uniaxial LCF Properties of Additively Manufactured In718. In: EAN 2023 - 61st Conference on Experimental Stress Analysis, Proceedings of Full Papers. 2024. s. 52-59. ISBN 978-80-553-3677-0.
Detail

HALAMA, Radim; KOŘÍNEK, Michal; ČAPEK, Jiří; HAJNYŠ, Jiří a TROJAN, Karel. Impact of Direct Ageing on Mechanical Properties and Residual Stresses of Maraging 300 Steel Manufactured by SLM. In: EAN 2024 - 62nd International Conference on Experimental Stress Analysis, Book of Extended Abstracts. 2024. ISBN 978-80-261-1225-9.
Detail

FEJKO, Patrik; DOBRÁNSKY, Jozef; MICHALIK, Peter; GOMBÁR, Miroslav a ČEPOVÁ, Lenka. Monitoring of Technological Factors to Change the Length of the Crack Created by Cataphoretic Coating. In: Lecture Notes in Mechanical Engineering 2024. 2024. s. 287-295. ISBN 978-3-031-62683-8.
Detail

POSMYKOVÁ, Eliška; MĚSÍČEK, Jakub; KOTZUR, Daniel; PAGÁČ, Marek; PETRŮ, Jana a KOZIOR, Tomasz. Topology Optimization of the Actuating Arm. In: Lecture Notes in Networks and Systems. Volume 1062. 2024. s. 216-225. ISBN 978-3-031-65655-2.
Detail

PRŮŠA, Michal; NĚMEČEK, Petr; HAJNYŠ, Jiří; MĚSÍČEK, Jakub; PAGÁČ, Marek; PETRŮ, Jana a ČEP, Robert. 3D Print of Clamping Tools Used in Electric Motor Manufacturing. In: Lecture Notes in Networks and Systems. Volume 1062. 2024. s. 3-13. ISBN 978-3-031-65655-2.
Detail

MOHYLA, Petr; BÍLEK, Jiří; BLÁHA, Roman; LINDOVSKÝ, Miroslav; GEMBALOVÁ, Lucie a VONTOROVÁ, Jiřina. TIG svařování slitiny AlSi10Mg vyrobené pomocí aditivní technologie. In: PROMATTEN 2024 : Progresivní materiály a technologie : sborník přednášek odborné konference = Advanced Materials and Technologies : conference proceedings : 27.-29.11-.2024, Malá Morávka. 2024. s. 66-75. ISBN 978-80-248-4774-0.
Detail

HALAMA, Radim; PAŠKA, Zbyněk; NATARAJAN, Ajay Vignesh a HAJNYŠ, Jiří. A technique for estimation of cyclic stress-strain curves using an optical strain measurement and its application to additively manufactured AlSi10Mg. In: Procedia Structural Integrity. Volume 56. 2024. s. 111-119. ISBN 0-000-00000-0.
Detail

JASIULEWICZ-KACZMAREK, Malgorzata; ANTOSZ, Katarzyna; WASZKOWSKI, Robert; NIELSEN, Izabela a ČEP, Robert. “Technology” as the fourth dimension of sustainable maintenance management. In: IFAC PapersOnline. Volume 56, Issue 2. 2023. s. 162-167. ISBN 978-1-71387-234-4.
Detail

KOPELENT, Michal; LOSERTOVÁ, Monika; KONEČNÁ, Kateřina; SKOUPÝ, Ondřej; ČEPICA, Daniel; HALO, Tomáš; FRYDRÝŠEK, Karel a VLČEK, Tomáš. Effect of thermal treatment and strain rate on superelastic and mechanical properties of NiTi sheet. In: Journal of Physics: Conference Series. Volume 2572. 2023. ISBN 0-000-00000-0.
Detail

KUNČICKÁ, Lenka; BENČ, Marek; KAČOR, Petr a MAREK, Martin. EFFECT OF OXIDE DISPERSION ON ELECTRIC CONDUCTIVITY OF ROTARY SWAGED POWDER-BASED COPPER COMPOSITES. In: METAL 2023 : 32nd International Conference on Metallurgy and Materials : conference proceedings : May 17–19, 2023, OREA Congress Hotel Brno, Czech Republic, EU. 2023. ISBN 978-80-88365-12-9.
Detail

PÁLENÍK, Radek; MOLČAN, Michal a PORUBA, Zdeněk. COMPARISON OF CO-ROTATIONAL AND NONLINEAR FINITE ELEMENT SIMULATIONS WITH GEOMETRIC NONLINEARITIES. In: Engineering Mechanics 2022 : 27/28th international conference : May 9-12, 2022, Milovy, Czech Republic : book of full texts. 2022. s. 301-304. ISBN 978-80-86246-48-2.
Detail

PAGÁČ, Marek; PETRŮ, Jana; ČEP, Robert; HAJNYŠ, Jiří; HLAVSA, Josef a KRPEC, Pavel. A Review of Ni-based Superalloy Produced by the Additive Manufacturing Technology Powder Bed Fusion: Technologies, Materials, Applications, Challenges and Future Trends. In: International Conference on Electrical, Computer, Communications and Mechatronics Engineering, ICECCME 2022 : 16 - 18 November, 2022 : Male, MALDIVES. 2022. ISBN 978-1-66547-096-4.
Detail

MAZUR, Tomasz; RUCKI, Miroslaw; JAKUBOWICZ, Michal a ČEPOVÁ, Lenka. Analysis of the Direction-Dependent Point Identification Accuracy in CMM Measurement. In: Lecture Notes in Mechanical Engineering : Advances in Manufacturing III. Volume 4. 2022. s. 48-56. ISBN 978-3-031-03924-9.
Detail

MIZERA, Ondřej; HAJNYŠ, Jiří; ČEPOVÁ, Lenka; ZELINKA, Jan a MĚSÍČEK, Jakub. Laser Measurement by Angle Accuracy Method in Additive Technology SLM 316L. In: Lecture Notes in Mechanical Engineering: Advances in Manufacturing III. Volume 4. 2022. s. 79-88. ISBN 978-3-031-03924-9.
Detail

KOVÁŘ, Ladislav; HAPLA, Tomáš; MELECKÝ, Jaroslav a KURAČ, Daniel. BALING - TECHNOLOGY FOR THE PREPARATION OF CHARGES INTO STEELMAKING FURNACES. Přel. Gabriela CHUDAŠOVÁ. In: METAL 2022 : 31th International Conference on Metallurgy and Materials : abstracts : May 18 - 19, 2022, OREA Congress Hotel Brno, Czech Republic, EU. 2022. s. 115-120. ISBN 978-80-88365-02-0.
Detail

FRYDRÝŠEK, Karel; ČEPICA, Daniel; HALO, Tomáš; SEJDA, František; VLČKOVÁ, Kateřina; SKOUPÝ, Ondřej; PLEVA, lLeopold; HLINKA, Josef; SADÍLEK, Marek; HAVLÍČEK, Miroslav; KRPEC, Pavel; STANČEKOVÁ, Dana a EIBA, Patrik. Implants in Traumatology and Orthopaedics. In: Material Technologies in Silesia'2022 : międzynarodowa konferencja naukowa : 12-15 czerwca 2022, Wisła. 2022. s. 41-42. ISBN 978-83-65138-32-3.
Detail

ČEP, Robert; SADÍLEK, Marek; DVOŘÁČEK, Tomáš; ČEPOVÁ, Lenka; KUŠNÍR, Lukáš; SNIEHOTTA, Patrik a KOURIL, Karel. Comparison of geometrical accuracy of machine tools and manufactured parts. In: Proceedings of the 26th World Multi-Conference on Systemics, Cybernetics and Informatics : WMSCI 2022. 2022. s. 71-80. ISBN 978-1-950492-64-0.
Detail

HALAMA, Radim; GÁL, Petr; PAGÁČ, Marek; GOVINDARAJ, Bhuvanesh; KOCICH, Radim a KUNČICKÁ, Lenka. On cyclic hardening/softening behaviour of conventional and 3D printed SS316L. In: Experimental Stress Analysis - 58th International Scientific Conference, EAN 2020. 2021. s. 98-106. ISBN 978-80-248-4451-0.
Detail

DYMÁČEK, P.; KLOC, L.; GABRIEL, D.; MASÁK, J.; PAGÁČ, Marek a HALAMA, Radim. Creep behaviour of 316L stainless steel prepared by 3D printing. In: Experimental Stress Analysis - 58th International Scientific Conference, EAN 2020. 2021. s. 64-69. ISBN 978-80-248-4451-0.
Detail

KOVÁŘ, Ladislav; NOVÁK, Pavel; HAPLA, Tomáš a MELECKÝ, Jaroslav. POSSIBILITIES TO MEASURE EVALUATING QUANTITIES OF THE MEDIUM FLOWING IN THE LANCE OUTFLOWS OF BLOWING SYSTEMS DESIGNED FOR HIGH-TEMPERATURE REACTORS. Přel. Gabriela CHUDAŠOVÁ. In: METAL 2021 : conference proceedings : 30th Anniversary International Conference on Metallurgy and Materials : May 26 - 28, 2021, Brno, Czech Republic, EU. 2021. s. 140-146. ISBN 978-80-87294-99-4.
Detail

PASTRŇÁK, Martin; HILŠER, Ondřej; RUSZ, Stanislav; REŠKA, Vladislav; SZKANDERA, Pavel a ZABYSTRZAN, Rostislav. EFFECT OF PROCESSING ROUTE ON MICROSTRUCTURE AND MICROHARDNESS OF LOW-CARBON STEEL SUBJECTED TO DRECE PROCESS. In: METAL 2021 : conference proceedings : 30th Anniversary International Conference on Metallurgy and Materials : May 26 - 28, 2021, Brno, Czech Republic, EU. 2021. s. 323-328. ISBN 978-80-87294-99-4.
Detail

SADÍLEK, Marek; ČEP, Robert; ČEPOVÁ, Lenka; KUŠNÍR, Lukáš a SNIEHOTTA, Patrik. The tool path tolerance setting with respect to accuracy during 3axis milling. In: Proceedings of the 25th World Multi-Conference on Systemics, Cybernetics and Informatics : WMSCI 2021. 2021. s. 16-21. ISBN 978-1-950492-54-1.
Detail

KOŘÍNEK, Michal; HALAMA, Radim; FOJTÍK, František; PAGÁČ, Marek; KRČEK, Jiří; ŠEBEK, František a KRZIKALLA, David. Monotonic testing of 3D printed SS316L under multiaxial loading. In: 58th International Conference on Experimental Stress Analysis – EAN2020, October 19–22, 2020, online, Czech Republic. 2020. s. 213-224. ISBN 978-80-248-4451-0.
Detail

PAGÁČ, Marek; HAJNYŠ, Jiří; HALAMA, Radim; ALDABASH, Tariq Abdulaziz A; MĚSÍČEK, Jakub; JANČAR, Lukáš a JANSA, Jan. Prediction of residual stresses using FEM before 3D printing by selective laser melting of stainless steel aisi 316l. In: 58th International Conference on Experimental Stress Analysis – EAN2020, October 19–22, 2020, online, Czech Republic. 2020. s. 344-352. ISBN 978-80-248-4451-0.
Detail

ŘEPA, Vojtěch; MARŠÁLEK, Pavel; PROKOP, Jiří; ŠOTOLA, Martin; STARECZEK, David; RYBANSKÝ, David a HALAMA, Radim. Modelling and testing of 3D printed flexible structures with three-pointed star pattern used in biomedical applications. In: 58th International Conference on Experimental Stress Analysis – EAN2020, October 19–22, 2020, online, Czech Republic. 2020. s. 451-455. ISBN 978-80-248-4451-0.
Detail

HLOSTA, Jakub; ČERMÁK, Martin; ŽUROVEC, David a DUBOVSKÝ, Viktor. Numerical study of galton board experiment via discrete element method simulation. In: AIP Conference Proceedings. Volume 2293. 2020. ISBN 978-0-7354-4025-8.
Detail

HALO, Tomáš; FRYDRÝŠEK, Karel; ČEPICA, Daniel; SKOUPÝ, Ondřej; MICHAL, Pavel; KRAUS, Šimon; HAVLAS, Vojtěch a KOHUT, Jiří. NUMERICAL SIMULATION OF STAPLES FOR EPIPHYSIODESIS. In: Engineering Mechanics 2020 : 26th international conference : November 24-25, 2020, Brno, Czech Republic : book of full texts. 2020. s. 186-189. ISBN 978-80-214-5896-3.
Detail

FUSEK, Martin; PORUBA, Zdeněk; PAVLÍČEK, Pavel; FOJTÍK, František; CIENCIALA, Jakub; KREJČÍ, Lucie a NEZDAŘILOVÁ, Anna. Analysis of mechanical properties of printed polyamid PA11. In: Experimental Stress Analysis - 58th International Scientific Conference, EAN 2020. 2020. s. 93-97. ISBN 978-80-248-4451-0.
Detail

ANTIC, A.; MILOSEVIC, M.; ČEP, Robert a UNGUREANU, N.. A texture based descriptors used for real time tool condition monitoring. In: IOP Conference Series: Materials Science and Engineering. Volume 749. 2020. ISBN 0-000-00000-0.
Detail

SZKANDERA, Pavel; SADÍLEK, Marek; RUSZ, Stanislav; DOSTÁL, Pavel; DUBSKÝ, Jaroslav; ZELINKA, Jan a KOTÁSEK, Ondřej. Increasing the mechanical properties of DC01 steel by the drece method of severe plastic deformation. In: METAL 2020 : 29th International Conference on Metallurgy and Materials : conference proceedings : May 20-22, 2020, Brno, Czech Republic, EU. 2020. s. 302-307. ISBN 978-80-87294-97-0.
Detail

PAVLÍK, Jan; SADÍLEK, Marek a TROCHTA, Miroslav. THE THICKNESS OF THE MARKING COMPOUND USED FOR CREATING REAL CONTACT PATTERNS ONTHE GEARING. In: 60th International Conference of Machine Design Departments : conference abstracts : September 10th-13th 2019, Hnanice, Czech Republic. 2019. s. 156-160. ISBN 0-000-00000-0.
Detail

MOSLER, Václav; HAVLÍK, Jiří; JANČAR, Lukáš a KUNZOVÁ, Ivana. METHODOLOGY MEASUREMENT OF INCLINATION GEARS IN OPERATION. In: 60th International Conference of Machine Design Departments : conference abstracts : September 10th-13th 2019, Hnanice, Czech Republic. 2019. ISBN 0-000-00000-0.
Detail

ZELINKA, Jan; ČEPOVÁ, Lenka; GAPINSKI, Bartosz; ČEP, Robert; MIZERA, Ondřej a HRUBÝ, Radek. The Effect of a Stylus Tip on Roundness Deviation with Different Roughness. In: ADVANCES IN MANUFACTURING II, VOL 5 - METROLOGY AND MEASUREMENT SYSTEMS. 2019. s. 147-157. ISBN 978-3-030-18682-1.
Detail

MIZERA, Ondřej; ČEPOVÁ, Lenka; SADÍLEK, Marek; ČEP, Robert; HRUBÝ, Radek a ZELINKA, Jan. The Problems of Measuring Selected Geometric Deviations on a CMM After Machining. In: ADVANCES IN MANUFACTURING II, VOL 5 - METROLOGY AND MEASUREMENT SYSTEMS. 2019. s. 158-171. ISBN 978-3-030-18682-1.
Detail

HALAMA, Radim; PAGÁČ, Marek; PAŠKA, Zbyněk; PAVLÍČEK, Pavel a CHEN, Xu. RATCHETING BEHAVIOUR OF 3D PRINTED AND CONVENTIONALLY PRODUCED SS316L MATERIAL. In: American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP. Volume 8, 2019. 2019. s. 1-6. ISBN 978-0-7918-5901-8.
Detail

FUSEK, Martin; PORUBA, Zdeněk; HALAMA, Radim; BĚLÍK, Radomír; FRANTIŠEK, Ondřej; SCHNEIDER, Markus; BIAGINI, Veronica a SADÍLEK, Marek. Influence of loading speed on yield strength value of S235 and C45 steels. In: Experimental Stress Analysis - 57th International Scientific Conference, EAN 2019 - Conference Proceedings. 2019. s. 102-105. ISBN 978-80-214-5766-9.
Detail

MĚSÍČEK, Jakub; PETRŮ, Jana; ZLÁMAL, Tomáš; PAGÁČ, Marek; ŠEDIVÝ, Jiří; VORTEL, Ondřej a DRÁBEK, Lukáš. The use of technology local heating by laser for turning of difficult to machine materials. In: Lecture Notes in Mechanical Engineering : advances in manufacturing engineering and materials. 2019. s. 290-298. ISBN 978-3-319-99352-2.
Detail

RUSZ, Stanislav; ŠVEC, Jiří; HILŠER, Ondřej; ZABYSTRZAN, Rostislav; MAREŠ, Vratislav a KLOS, Marcel. Influence of severe plastic deformation process on mechanical properties of low carbon steel. In: METAL 2019 : 28th International Conference on Metallurgy and Materials : abstracts : May 22nd-24th 2019, Hotel Voronez I, Brno, Czech Republic, EU. 2019. s. 1962-1967. ISBN 978-80-87294-92-5.
Detail

MUSIL, Václav; SADÍLEK, Marek; KRATOCHVÍL, Jiří; ČEP, Robert a LICHOVNÍK, Jiří. Evaluation of finishing machining of stainless steel 1.4307. In: METAL 2019 : conference proceedings : peer reviewed : 28th International Conference on Metallurgy and Materials : May 22nd-24th 2019, Hotel Voronez I, Brno, Czech Republic, EU. 2019. s. 1103-1109. ISBN 978-80-87294-92-5.
Detail

ZELINKA, Jan; SADÍLEK, Marek; SZKANDERA, Pavel; MIZERA, Ondřej a ČEPOVÁ, Lenka. The surface roughness of the machined surface of multiaxial milling. In: METAL 2019 : conference proceedings : peer reviewed : 28th International Conference on Metallurgy and Materials : May 22nd-24th 2019, Hotel Voronez I, Brno, Czech Republic, EU. 2019. s. 1197-1202. ISBN 978-80-87294-92-5.
Detail

ZLÁMAL, Tomáš; MALOTOVÁ, Šárka; SZOTKOWSKI, Tomáš; TREFIL, Antonín a VORTEL, Ondřej. Machining of nickel alloy by cutting tool with prepared cutting edge preparation. In: METAL 2019 : conference proceedings : peer reviewed : 28th International Conference on Metallurgy and Materials : May 22nd-24th 2019, Hotel Voronez I, Brno, Czech Republic, EU. 2019. s. 1761-1767. ISBN 978-80-87294-92-5.
Detail

RUSZ, Stanislav; HILŠER, Ondřej; SZKANDERA, Pavel; ZABYSTRZAN, Rostislav; ŠVEC, Jiří; MAREŠ, Vratislav a KLOS, Marcel. Influence of severe plastic deformation process on mechanical properties of low carbon steel. In: METAL 2019 : conference proceedings : peer reviewed : 28th International Conference on Metallurgy and Materials : May 22nd-24th 2019, Hotel Voronez I, Brno, Czech Republic, EU. 2019. s. 473-476. ISBN 978-80-87294-92-5.
Detail

TILL, Jakub; RUSZ, Stanislav; MICHALSKI, Jakub; ČÍŽEK, Lubomír; TYLŠAR, Stanislav; SALAJKA, Michal; KEDROŇ, Jan; MALANÍK, Karel; DONIC, Tibor a HADASIK, Eugeniusz. Change of geometry of ECAP channel to increase deformation intensity by SPD process of AlMn1Cu and AZ 31 alloys. In: METAL 2019 : conference proceedings : peer reviewed : 28th International Conference on Metallurgy and Materials : May 22nd-24th 2019, Hotel Voronez I, Brno, Czech Republic, EU. 2019. s. 489-494. ISBN 978-80-87294-92-5.
Detail

ZLÁMAL, Tomáš; MALOTOVÁ, Šárka; SZOTKOWSKI, Tomáš; ČEP, Robert a MARINESCU, I.D.. The geometry of grooving tool and its influence on dynamic load system for turning. In: TRANSCOM 2019 : 13th International Scientific Conference of Young Scientists on Sustainable, Modern and Safe Transport : book of abstracts : High Tatras, Grand Hotel Bellevue, 29 - 31 May 2019, Slovak Republic. 2019. s. 602-609. ISBN 978-80-554-1565-9.
Detail

HRUBÝ, Radek; ČEPOVÁ, Lenka; ČEP, Robert; MIZERA, Ondřej a ZELINKA, Jan. Measurement of small complex shapes. In: Transportation Research Procedia. Volume 40. 2019. s. 251-258. ISBN 0-000-00000-0.
Detail

MOHYLA, Petr; STERNADELOVÁ, Kristýna; KREJČÍ, Lucie a PAGÁČ, Marek. Analysis of welded joint properties on a tube manufactured by SLM technology. In: Zeszyt abstraktów międzynarodowej konferencji Material Technologies in Silesia’ 2019 : 13-16 października 2019, Zawiercie. 2019. s. 107-108. ISBN 978-83-65138-24-8.
Detail

MĚSÍČEK, Jakub; SLÍVA, Aleš a PETRŮ, Jana. Využití kompozitních materiálů v dopravních prostředcích. In: 44. mezinárodní konference kateder dopravních, manipulačních, stavebních a zemědělských strojů : Kurdějov 11. až 12.9. 2018. 2018. s. 150-155. ISBN 978-80-214-5644-0.
Detail

RADEK, N.; PLISZKA, I.; GADEK-MOSZCZAK, A.; ROLEK, J. a PETRŮ, Jana. Properties of carbide electro-spark coatings after laser processing. In: AIP Conference Proceedings. Volume 2017. 2018. ISBN 978-0-7354-1735-9.
Detail

ŠVEC, Jiří; SZKANDERA, Pavel; RUSZ, Stanislav; HILŠER, Ondřej a PETRŮ, Jana. Refining Structure of Copper by SPD process. In: IOP Conference Series: Materials Science and Engineering. Volume 461. 2018. ISBN 0-000-00000-0.
Detail

SKOTNICOVÁ, Kateřina; BURKHANOV, G.S.; ČEGAN, Tomáš; KOLCHUGINA, N.B.; LUKIN, A.A.; ŽIVOTSKÝ, Ondřej; PROKOFEV, Pavel; KURSA, Miroslav; JUŘICA, Jan; KOSHKID'KO, Y. a DRULIS, H.. Optimizing the microstructure of sintered Nd-Fe-B magnets via the application of scandium hydride. In: Journal of Physics: Conference Series. Volume 1134. 2018. s. "012055". ISBN 0-000-00000-0.
Detail

SAJGALIK, M.; CZANOVA, T.; ZAUSKOVA, L.; DRBUL, M.; SADÍLEK, Marek a VALÍČEK, Jan. Triaxial analysis of residual stress in surface layers after high feed machining using X-ray diffractometer. In: MATEC Web of Conferences. Volume 137. 2018. s. 1-5. ISBN 978-2-7598-9027-9.
Detail

ČEP, Robert; MALOTOVÁ, Šárka; KRATOCHVÍL, Jiří; STANČEKOVÁ, Dana a CZÁN, Andrej. Diagnosis of machine tool with using Renishaw ball-bar system. In: MATEC Web of Conferences. Volume 157. 2018. s. 1-7. ISBN 0-000-00000-0.
Detail

ZLÁMAL, Tomáš; MALOTOVÁ, Šárka; PETRŮ, Jana; BRYTAN, Zbigniew a MUSIL, Václav. The evaluation of the surface quality after laser cutting. In: MATEC Web of Conferences. Volume 244. 2018. s. 1-7. ISBN 0-000-00000-0.
Detail

HAJNYŠ, Jiří; PAGÁČ, Marek; ZLÁMAL, Tomáš; PETRŮ, Jana a KOUSAL, Lukáš. Stiffness of 316L stainless steel support structures proposed for the SLM process. In: MATEC Web of Conferences. Volume 244. 2018. s. 64-72. ISBN 0-000-00000-0.
Detail

KRATOCHVÍL, Jiří; SADÍLEK, Marek a MRAZIK, J. The effect of chip former on power loading of recessing tool. In: MATEC Web of Conferences. Volume 244. 2018. ISBN 0-000-00000-0.
Detail

STRUNG, Václav; SZURMAN, Ivo; POHLUDKA, Martin; PETLÁK, Daniel a VONTOROVÁ, Jiřina. Microstructure and purity of the NiTiZr-based alloys prepared by a plasma metallurgy process. In: METAL 2018 : conference proceedings : reviewed version : 27th International Conference on Metallurgy and Materials : May 23rd-25th 2018, Hotel Voronez I, Brno, Czech Republic, EU. 2018. s. 1734-1739. ISBN 978-80-87294-84-0.
Detail

ZLÁMAL, Tomáš; PETRŮ, Jana; MALOTOVÁ, Šárka; ČEP, Robert a HAJNYŠ, Jiří. The influence of microgeometry of cutting tool on dynamic load of system. In: METAL 2018 : conference proceedings : reviewed version : 27th International Conference on Metallurgy and Materials : May 23rd-25th 2018, Hotel Voronez I, Brno, Czech Republic, EU. 2018. s. 1795-1800. ISBN 978-80-87294-84-0.
Detail

ZEGZULKA, Jiří; JEZERSKÁ, Lucie; HLOSTA, Jakub; VALDEROVÁ, Alice a NEČAS, Jan. Optimization proposal for ferrite magnet production. In: METAL 2018 : conference proceedings : reviewed version : 27th International Conference on Metallurgy and Materials : May 23rd-25th 2018, Hotel Voronez I, Brno, Czech Republic, EU. 2018. s. 199-204. ISBN 978-80-87294-84-0.
Detail

MICHALSKI, Jakub; TILL, Jakub; PETRŮ, Jana; ŠPALEK, František; RUSZ, Stanislav a ŠVEC, Jiří. The effect of severe plastic deformation on the mechanical properties and structure of brass. In: METAL 2018 : conference proceedings : reviewed version : 27th International Conference on Metallurgy and Materials : May 23rd-25th 2018, Hotel Voronez I, Brno, Czech Republic, EU. 2018. s. 419-425. ISBN 978-80-87294-84-0.
Detail

TILL, Jakub; MICHALSKI, Jakub; PETRŮ, Jana a ŠPALEK, František. Utilization of the process of severe plastic deformation in increasing the quality of the CU sheet metal strip. In: METAL 2018 : conference proceedings : reviewed version : 27th International Conference on Metallurgy and Materials : May 23rd-25th 2018, Hotel Voronez I, Brno, Czech Republic, EU. 2018. s. 487-494. ISBN 978-80-87294-84-0.
Detail

MUSIL, Václav; SADÍLEK, Marek; ČEP, Robert; ČEPOVÁ, Lenka; KRATOCHVÍL, Jiří a KUŠNÍR, Lukáš. Decreasing the surface roughness of the seating surfaces of ball valves. In: METAL 2018 : conference proceedings : reviewed version : 27th International Conference on Metallurgy and Materials : May 23rd-25th 2018, Hotel Voronez I, Brno, Czech Republic, EU. 2018. s. 801-807. ISBN 978-80-87294-84-0.
Detail

PAGÁČ, Marek; HAJNYŠ, Jiří; MALOTOVÁ, Šárka; ZLÁMAL, Tomáš a PETRŮ, Jana. The influence of the laser power on the utility properties of the surface roughness parameter of the overhangs during the SLM proces. In: METAL 2018 : conference proceedings : reviewed version : 27th International Conference on Metallurgy and Materials : May 23rd-25th 2018, Hotel Voronez I, Brno, Czech Republic, EU. 2018. s. 814-819. ISBN 978-80-87294-84-0.
Detail

SZOTKOWSKI, Tomáš a MRKVICA, Ivan. JIG design for disassembly of undercarriage component. In: METAL 2018 : conference proceedings : reviewed version : 27th International Conference on Metallurgy and Materials : May 23rd-25th 2018, Hotel Voronez I, Brno, Czech Republic, EU. 2018. s. 879-884. ISBN 978-80-87294-84-0.
Detail

ČEPOVÁ, Lenka; KOVÁČIKOVÁ, Andrea; SADÍLEK, Marek a ČEP, Robert. GRR analysis and its graphical and numerical outputs. In: WMSCI 2018 - 22nd World Multi-Conference on Systemics, Cybernetics and Informatics, Proceedings. 2018. s. 43-47. ISBN 978-1-941763-82-7.
Detail

SADÍLEK, Marek; ČEPOVÁ, Lenka a ČEP, Robert. Increasing accuracy during milling on turn-milling centers. In: WMSCI 2018 - 22nd World Multi-Conference on Systemics, Cybernetics and Informatics, Proceedings. 2018. s. 90-95. ISBN 978-1-941763-82-7.
Detail

ŠMACH, Jiří; ŠOFER, Michal; ČEPOVÁ, Lenka a HALAMA, Radim. Problematics of twin-disc wear resistance tests for selected wheel rim materials. In: Experimental Stress Analysis 2017: 55th international scientific conference : May 30th - June 1st, 2017, Nový Smokovec, Slovakia : book of extended abstracts. 2017. s. 50-56. ISBN 978-80-553-3167-6.
Detail

ČEP, Robert; MALOTOVÁ, Šárka; ZLÁMAL, Tomáš; VRBA, Vladimír a BORZAN, Marian. Tracking of the development wear of cutting tools with different geometry during parting-off. In: MATEC Web of Conferences. Volume 137. 2017. s. 1-8. ISBN 978-2-7598-9027-9.
Detail

ČEPOVÁ, Lenka; SADÍLEK, Marek; ČEP, Robert a MIKULOVÁ, Dagmar. Příspěvek k hodnocení funkčních ploch tělesa kulového kohoutu. In: METAL 2017: conference proceedings : 26th International Conference on Metallurgy and Materials : (reviewed version) : May 24th-26th 2017, Hotel Voroněž I, Brno, Czech Republic, EU. 2017. s. 1207-1213. ISBN 978-80-87294-79-6.
Detail

MUSIL, Václav; KRATOCHVÍL, Jiří; ČEP, Robert; SADÍLEK, Marek; ŠPALEK, František a PAGÁČ, Marek. Effective finishing apertures using roughness criterion RA = 0.2 μm. In: METAL 2017: conference proceedings : 26th International Conference on Metallurgy and Materials : (reviewed version) : May 24th-26th 2017, Hotel Voroněž I, Brno, Czech Republic, EU. 2017. s. 1338-1343. ISBN 978-80-87294-79-6.
Detail

RUSZ, Stanislav; KRAUS, Martin; HILŠER, Ondřej; ŠVEC, Jiří; KEDROŇ, Jan; ČÍŽEK, Lubomír; DONIČ, Tibor; TAŃSKI, Tomasz a KREJČÍ, Lucie. Increasing the quality of DC01 steel by drece method. In: METAL 2017: conference proceedings : 26th International Conference on Metallurgy and Materials : (reviewed version) : May 24th-26th 2017, Hotel Voroněž I, Brno, Czech Republic, EU. 2017. s. 527-532. ISBN 978-80-87294-79-6.
Detail

SCHIFFNER, Jan; ZLÁMAL, Tomáš; PETRŮ, Jana a ČEP, Robert. Technology of Machining of Thermal Sprayed Coatings. In: METAL 2017: conference proceedings : 26th International Conference on Metallurgy and Materials : (reviewed version) : May 24th-26th 2017, Hotel Voroněž I, Brno, Czech Republic, EU. 2017. s. 1444-1449. ISBN 978-80-87294-79-6.
Detail

HILŠER, Ondřej; ŠPALEK, František; RUSZ, Stanislav; KUC, Dariusz; HADASIK, Eugeniusz a SNOPIŃSKI, Przemysław. Lithium containing AZ31 magnesium alloy processed by ECAP. In: METAL 2017: conference proceedings : 26th International Conference on Metallurgy and Materials : (reviewed version) : May 24th-26th 2017, Hotel Voroněž I, Brno, Czech Republic, EU. 2017. s. 1738-1745. ISBN 978-80-87294-79-6.
Detail

PAGÁČ, Marek; MALOTOVÁ, Šárka; ZLÁMAL, Tomáš; PETRŮ, Jana a KRATOCHVÍL, Jiří. Evaluation of chosen parameters of surface roughness (microgeometry) on the samples from stainless steel 316L and manufactured by the additive technology SLM. In: METAL 2017: conference proceedings : 26th International Conference on Metallurgy and Materials : (reviewed version) : May 24th-26th 2017, Hotel Voroněž I, Brno, Czech Republic, EU. 2017. s. 956-961. ISBN 978-80-87294-79-6.
Detail

PAGÁČ, Marek; HAJNYŠ, Jiří; PETRŮ, Jana; ZLÁMAL, Tomáš a ŠOFER, Michal. The study of mechanical properties stainless steel 316L after production from metal powder with using additive technology and by method selective laser melting. In: METAL 2017: conference proceedings : 26th International Conference on Metallurgy and Materials : (reviewed version) : May 24th-26th 2017, Hotel Voroněž I, Brno, Czech Republic, EU. 2017. s. 962-967. ISBN 978-80-87294-79-6.
Detail

PIESOVA, Marianna; CZAN, Andrej; SAJGALIK, Michal; CZANOVA, Tatiana a ČEP, Robert. Experimental quantification of the austenitic phase in steels using the Average peak method of x-ray diffractometry. In: Procedia Engineering. Volume 192. 2017. s. 689-694. ISBN 0-000-00000-0.
Detail

KRATOCHVÍL, Jiří; SADÍLEK, Marek a PAGÁČ, Marek. LAYER OF THE TOOL TESTING DURING CUTTING MATERIAL X120MN12. In: METAL 2016 : 25th Anniversary International Conference on Metallurgy and Materials : list of abstracts : May 25th-27th 2016, Hotel Voroněž I, Brno, Czech Republic, EU. 2016. s. 1096-1102. ISBN 978-80-87294-67-3.
Detail

ŠPALEK, František; PETRŮ, Jana; TROCHTA, Miroslav; HAŠOVÁ, Slavomíra a HLOCH, Sergej. DEPENDENCE OF MANUFACTURING PRECISION OF WEDM CUTTING TECHNOLOGY ON POROSITY OF ALUMINUM FOAM. In: METAL 2016 : 25th Anniversary International Conference on Metallurgy and Materials : list of abstracts : May 25th-27th 2016, Hotel Voroněž I, Brno, Czech Republic, EU. 2016. s. 1534-1539. ISBN 978-80-87294-66-6.
Detail

PAGÁČ, Marek; MALOTOVÁ, Šárka; SADÍLEK, Marek; PETRŮ, Jana; ZLÁMAL, Tomáš a KRATOCHVÍL, Jiří. INFLUENCE OF EFFECTIVE MILLING STRATEGIES ON THE RESIDUAL STRESS. In: METAL 2016 : 25th Anniversary International Conference on Metallurgy and Materials : list of abstracts : May 25th-27th 2016, Hotel Voroněž I, Brno, Czech Republic, EU. 2016. s. 819-824. ISBN 978-80-87294-67-3.
Detail

PETRŮ, Jana; SCHIFFNER, Jan; ZLÁMAL, Tomáš; ČEP, Robert; KRATOCHVÍL, Jiří a STANČEKOVÁ, Dana. CHIP BREAKER OF CUTTING TOOL AND ITS INFLUENCE AT DYNAMIC FORCE OF MACHINING TITANIUM ALLOY TI(6)AL(4)V. In: METAL 2016: conference proceedings : (reviewed version) : 25th Anniversary International Conference on Metallurgy and Materials : May 25th-27th 2016, Hotel Voronez I, Brno, Czech Republic, EU. 2016. s. 855-860. ISBN 978-80-87294-67-3.
Detail

PETRŮ, Jana; ZLÁMAL, Tomáš; ČEP, Robert; STANČEKOVÁ, Dana; PAGÁČ, Marek a VORTEL, Ondřej. Mechanisms of cutting insert wear and their influence on cutting ability of the tool during machining of special alloys. In: 3rd International Conference on Manufacturing Engineering and Technology for Manufacturing Growth (METMG 2015) : Proceedings Papers. 2015. s. 36-40. ISBN 978-1-61275-074-3.
Detail

THEISZ, Günther; FRYDRÝŠEK, Karel; FOJTÍK, František; KUBÍN, Tomáš; PEČENKA, Luboš; DEMEL, Jiří; MADEJA, Roman; SADÍLEK, Marek; KRATOCHVÍL, Jiří a PLEVA, Leopold. Medial plate for treatment of distal tibia fractures. In: Experimental Stress Analysis 2015 : 53rd international conference : June 1-4, 2015, Český Krumlov, Czech Republic : book of extended abstracts. 2015. s. 431-437. ISBN 978-80-01-05734-6.
Detail

PETRŮ, Jana; SCHIFFNER, Jan; ZLÁMAL, Tomáš; ČEP, Robert; KRATOCHVÍL, Jiří a STANČEKOVÁ, Dana. WEAR PROGRESS OF EXCHANGEABLE CUTTING INSERTS DURING TI(6)AL(4)V ALLOY MACHINING. In: METAL 2015 : 24th International Conference on Metallurgy and Materials : conference proceedings : June 3rd-5th 2015, Hotel Voroněž I, Brno, Czech Republic, EU. 2015. s. 1147-1155. ISBN 978-80-87294-62-8.
Detail

STANČEKOVÁ, Dana; ŠAJGALÍK, Michal; PETRŮ, Jana; NÁPRSTKOVÁ, Nataša a BALÁŽ, Pavol. IMPLEMENTATION OF COATING FOR FAILURE ELIMINATION OF DIAL GAUGES. In: METAL 2015 : 24th International Conference on Metallurgy and Materials : conference proceedings : June 3rd-5th 2015, Hotel Voroněž I, Brno, Czech Republic, EU. 2015. s. 1162-1169. ISBN 978-80-87294-62-8.
Detail

GOLA, Lukáš; VÁCLAVÍK, Vojtěch; DVORSKÝ, Tomáš a VALÍČEK, Jan. Návrh protipovodňové ochrany v katastru obce Bolatice. In: Aktuální vodohospodářské problémy : konference s mezinárodní účastí : 8.9.-10.9.2014, Hotel Davidův mlýn, Staré Těchanovice. 2014. s. 65-72. ISBN 978-80-248-3541-9.
Detail

PETRŮ, Jana; ZLÁMAL, Tomáš; ČEP, Robert a PAVLICA, Marek. The Using of Elements o Lean Production to Increase Efficiency and Competitiveness of Organizations in the Engineering Industry. In: Fourth International Conference on Industrial Engineering and Operations Management (IEOM 2014) : Bali, Indonesia, January 7-9, 2014. 2014. s. 802-811. ISBN 978-0-9855497-1-8.
Detail

GREGUŠOVÁ, Markéta; ŠAJDLEROVÁ, Ivana; ZUSKÁČ, Martin; KEDROŇ, Jan a PETRŮ, Jana. Expanding Knowledge of Students of Engineering Using E-Learning. In: Fourth International Conference on Industrial Engineering and Operations Management (IEOM 2014) : Bali, Indonesia, January 7-9, 2014. 2014. s. 879-888. ISBN 978-0-9855497-1-8.
Detail

PETRŮ, Jana; PETŘKOVSKÁ, Lenka; ZLÁMAL, Tomáš a MRKVICA, Ivan. Resistance of Sintered Carbide Materials against Heat Shocks Induced by Cutting Process. In: METAL 2014 : 23rd International Conference on Metallurgy and Materials : conference proceedings : May 21st-23rd 2014, hotel Voroněž I, Brno, Czech Republic, EU. 2014. s. 1-6. ISBN 978-80-87294-52-9.
Detail

PETŘKOVSKÁ, Lenka; PETRŮ, Jana; KRATOCHVÍL, Jiří a SADÍLEK, Marek. Chip Formation during Milling of Stainless Steels. In: METAL 2014 : 23rd International Conference on Metallurgy and Materials : conference proceedings : May 21st-23rd 2014, hotel Voroněž I, Brno, Czech Republic, EU. 2014. s. 1-6. ISBN 978-80-87294-52-9.
Detail

PAVLICA, Marek a SADÍLEK, Marek. Mechanické testování navrženého lepeného spoje. In: Mezinárodní konference výrobních technologií při příležitosti 50. výročí založení Katedry obrábění a montáže Fakulty strojní VŠB-TU Ostrava : 3.-5. září 2014, Hotel Bauer, Bílá. 2014. s. 42. ISBN 978-80-248-3518-1.
Detail

VÁCLAVÍK, Vojtěch; DVORSKÝ, Tomáš; BŘENEK, Aleš; DAXNER, Jaromír; VALÍČEK, Jan; KUŠNEROVÁ, Milena a BENDOVÁ, Miroslava. Tepelně izolační účinek malty s polyuretanovým plnivem v závislosti na vlhkosti. In: Životné prostredie - problémy a možnosti riešenia : ovzdušie, voda, poda : zborník publikácií zo IV. ročníka odbornej konferencie s medzinárodnou účasťou : 7.-9.4.2014, Hotel Sorea Titris, Tatranská Lomnica. 2014. s. 128-136. ISBN 978-80-89385-28-7.
Detail

ZLÁMAL, Tomáš; PETRŮ, Jana; SADÍLEK, Marek; PAGÁČ, Marek; BRYCHTA, Josef a SUROVSKÝ, Juraj. Durability and Wear of Exchangeable Coated Inserts after Machining the Ni-625 Alloy. In: 5th International Scientific and Expert Conference of the International TEAM Society (Technique, Education, Agriculture & Management) : Prešov, 4th-6th November 2013. 2013. s. 315-319. ISBN 0-000-00000-0.
Detail

ČEP, Robert; JANÁSEK, Adam; PETRŮ, Jana a DUPALA, Ondřej. Experimental Testing of Ceramic Cutting Inserts at Irregular Interrupted Cutting Process. In: IMETI 2013 - 6th International Multi-Conference on Engineering and Technological Innovation, Proceedings 2013. 2013. s. 145-149. ISBN 978-1-936338-92-4.
Detail

PETRŮ, Jana; ZLÁMAL, Tomáš; ČEP, Robert; PAGÁČ, Marek a GREPL, Martin. Influence of Strengthening Effect on Machinability of the Welded Inconel 625 and of the Wrought Inconel 625. In: IMETI 2013 - 6th International Multi-Conference on Engineering and Technological Innovation, Proceedings 2013. 2013. s. 155-159. ISBN 978-1-936338-92-4.
Detail

HARNIČÁROVÁ, Marta; VALÍČEK, Jan; ČEP, Robert; PETRŮ, Jana a ČEPOVÁ, Lenka. Surface Integrity Analysis in Laser Beam Cutting Process. In: METAL 2013 : 22nd International Conference on Metallurgy and Materials : conference proceedings : May 15th - 17th 2013, Hotel Voronez I, Brno Czech Republic, EU [CD-ROM]. 2013. s. 1-6. ISBN 978-80-87294-41-3.
Detail

ČEP, Robert; PETRŮ, Jana; ZLÁMAL, Tomáš; VALÍČEK, Jan; HARNIČÁROVÁ, Marta; JANÁSEK, Adam a ČEPOVÁ, Lenka. INFLUENCE OF FEED SPEED ON MACHINED SURFACE QUALITY. In: METAL 2013 : 22nd International Conference on Metallurgy and Materials : conference proceedings : May 15th - 17th 2013, Hotel Voronez I, Brno Czech Republic, EU [CD-ROM]. 2013. s. 1033-1038. ISBN 978-80-87294-41-3.
Detail

KRATOCHVÍL, Jiří a PETŘKOVSKÁ, Lenka. Monitoring the Behavior of Resistive Layers on the Inserts of Nitride Cutting Ceramics During Longitudinal Turning of Steel. In: METAL 2013 : 22nd International Conference on Metallurgy and Materials : conference proceedings : May 15th - 17th 2013, Hotel Voronez I, Brno Czech Republic, EU [CD-ROM]. 2013. s. 131-131. ISBN 978-80-87294-41-3.
Detail