JASIULEWICZ-KACZMAREK, Malgorzata, Katarzyna ANTOSZ, Robert WASZKOWSKI, Izabela NIELSEN a Robert ČEP. “Technology” as the fourth dimension of sustainable maintenance management. In: IFAC PapersOnline. Volume 56, Issue 2. London: IFAC-PapersOnLine, 2023. s. 162-167. ISBN 978-1-71387-234-4. [Detail]

KOPELENT, Michal, Monika LOSERTOVÁ, Kateřina KONEČNÁ, Ondřej SKOUPÝ, Daniel ČEPICA, Tomáš HALO, Karel FRYDRÝŠEK a Tomáš VLČEK. Effect of thermal treatment and strain rate on superelastic and mechanical properties of NiTi sheet. In: Journal of Physics: Conference Series. Volume 2572. Bristol: IOP Publishing, 2023. s. nestránkováno. ISBN 0-000-00000-0. [Detail]

KUNČICKÁ, Lenka, Marek BENČ, Petr KAČOR a Martin MAREK. EFFECT OF OXIDE DISPERSION ON ELECTRIC CONDUCTIVITY OF ROTARY SWAGED POWDER-BASED COPPER COMPOSITES. In: METAL 2023 : 32nd International Conference on Metallurgy and Materials : conference proceedings : May 17–19, 2023, OREA Congress Hotel Brno, Czech Republic, EU. Ostrava: Tanger, 2023. s. nestránkováno. ISBN 978-80-88365-12-9. [Detail]

PÁLENÍK, Radek, Michal MOLČAN a Zdeněk PORUBA. COMPARISON OF CO-ROTATIONAL AND NONLINEAR FINITE ELEMENT SIMULATIONS WITH GEOMETRIC NONLINEARITIES. In: Engineering Mechanics 2022 : 27/28th international conference : May 9-12, 2022, Milovy, Czech Republic : book of full texts. Praha: Institute of Theoretical and Applied Mechanics - Czech Academy of Sciences, 2022. s. 301-304. ISBN 978-80-86246-48-2. [Detail]

PAGÁČ, Marek, Jana PETRŮ, Robert ČEP, Jiří HAJNYŠ, Josef HLAVSA a Pavel KRPEC. A Review of Ni-based Superalloy Produced by the Additive Manufacturing Technology Powder Bed Fusion: Technologies, Materials, Applications, Challenges and Future Trends. In: International Conference on Electrical, Computer, Communications and Mechatronics Engineering, ICECCME 2022 : 16 - 18 November, 2022 : Male, MALDIVES. Piscataway: IEEE, 2022. s. nestránkováno. ISBN 978-1-66547-096-4. [Detail]

MAZUR, Tomasz, Miroslaw RUCKI, Michal JAKUBOWICZ a Lenka ČEPOVÁ. Analysis of the Direction-Dependent Point Identification Accuracy in CMM Measurement. In: Lecture Notes in Mechanical Engineering : Advances in Manufacturing III. Volume 4. Cham: Springer, 2022. s. 48-56. ISBN 978-3-031-03924-9. [Detail]

MIZERA, Ondřej, Jiří HAJNYŠ, Lenka ČEPOVÁ, Jan ZELINKA a Jakub MĚSÍČEK. Laser Measurement by Angle Accuracy Method in Additive Technology SLM 316L. In: Lecture Notes in Mechanical Engineering: Advances in Manufacturing III. Volume 4. Cham: Springer, 2022. s. 79-88. ISBN 978-3-031-03924-9. [Detail]

FRYDRÝŠEK, Karel, Daniel ČEPICA, Tomáš HALO, František SEJDA, Kateřina VLČKOVÁ, Ondřej SKOUPÝ, lLeopold PLEVA, Josef HLINKA, Marek SADÍLEK, Miroslav HAVLÍČEK, Pavel KRPEC, Dana STANČEKOVÁ a Patrik EIBA. Implants in Traumatology and Orthopaedics. In: Material Technologies in Silesia'2022 : międzynarodowa konferencja naukowa : 12-15 czerwca 2022, Wisła. Gliwice: Politechnika Śląska Gliwice, 2022. s. 41-42. ISBN 978-83-65138-32-3. [Detail]

ČEP, Robert, Marek SADÍLEK, Tomáš DVOŘÁČEK, Lenka ČEPOVÁ, Lukáš KUŠNÍR, Patrik SNIEHOTTA a Karel KOURIL. Comparison of geometrical accuracy of machine tools and manufactured parts. In: Proceedings of the 26th World Multi-Conference on Systemics, Cybernetics and Informatics : WMSCI 2022. Orlando: International Institute of Informatics and Systematics, 2022. s. 71-80. ISBN 978-1-950492-64-0. [Detail]

HALAMA, Radim, Petr GÁL, Marek PAGÁČ, Bhuvanesh GOVINDARAJ, Radim KOCICH a Lenka KUNČICKÁ. On cyclic hardening/softening behaviour of conventional and 3D printed SS316L. In: Experimental Stress Analysis - 58th International Scientific Conference, EAN 2020. Ostrava: VSB-Technical University of Ostrava, 2021. s. 98-106. ISBN 978-80-248-4451-0. [Detail]

DYMÁČEK, P., L. KLOC, D. GABRIEL, J. MASÁK, Marek PAGÁČ a Radim HALAMA. Creep behaviour of 316L stainless steel prepared by 3D printing. In: Experimental Stress Analysis - 58th International Scientific Conference, EAN 2020. Ostrava: VSB-Technical University of Ostrava, 2021. s. 64-69. ISBN 978-80-248-4451-0. [Detail]

PASTRŇÁK, Martin, Ondřej HILŠER, Stanislav RUSZ, Vladislav REŠKA, Pavel SZKANDERA a Rostislav ZABYSTRZAN. EFFECT OF PROCESSING ROUTE ON MICROSTRUCTURE AND MICROHARDNESS OF LOW-CARBON STEEL SUBJECTED TO DRECE PROCESS. In: METAL 2021 : conference proceedings : 30th Anniversary International Conference on Metallurgy and Materials : May 26 - 28, 2021, Brno, Czech Republic, EU. Ostrava: Tanger, 2021. s. 323-328. ISBN 978-80-87294-99-4. [Detail]

SADÍLEK, Marek, Robert ČEP, Lenka ČEPOVÁ, Lukáš KUŠNÍR a Patrik SNIEHOTTA. The tool path tolerance setting with respect to accuracy during 3axis milling. In: Proceedings of the 25th World Multi-Conference on Systemics, Cybernetics and Informatics : WMSCI 2021. Winter Garden: International Institute of Informatics and Systematics, 2021. s. 16-21. ISBN 978-1-950492-54-1. [Detail]

KOŘÍNEK, Michal, Radim HALAMA, František FOJTÍK, Marek PAGÁČ, Jiří KRČEK, František ŠEBEK a David KRZIKALLA. Monotonic testing of 3D printed SS316L under multiaxial loading. In: 58th International Conference on Experimental Stress Analysis – EAN2020, October 19–22, 2020, online, Czech Republic. Ostrava: Vysoká škola báňská - Technická univerzita Ostrava, 2020. s. 213-224. ISBN 978-80-248-4451-0. [Detail]

PAGÁČ, Marek, Jiří HAJNYŠ, Radim HALAMA, Tariq Abdulaziz A ALDABASH, Jakub MĚSÍČEK, Lukáš JANČAR a Jan JANSA. Prediction of residual stresses using FEM before 3D printing by selective laser melting of stainless steel aisi 316l. In: 58th International Conference on Experimental Stress Analysis – EAN2020, October 19–22, 2020, online, Czech Republic. Ostrava: Vysoká škola báňská - Technická univerzita Ostrava, 2020. s. 344-352. ISBN 978-80-248-4451-0. [Detail]

HALO, Tomáš, Karel FRYDRÝŠEK, Daniel ČEPICA, Ondřej SKOUPÝ, Pavel MICHAL, Šimon KRAUS, Vojtěch HAVLAS a Jiří KOHUT. NUMERICAL SIMULATION OF STAPLES FOR EPIPHYSIODESIS. In: Engineering Mechanics 2020 : 26th international conference : November 24-25, 2020, Brno, Czech Republic : book of full texts. Brno: Vysoké učení technické v Brně, 2020. s. 186-189. ISBN 978-80-214-5896-3. [Detail]

FUSEK, Martin, Zdeněk PORUBA, Pavel PAVLÍČEK, František FOJTÍK, Jakub CIENCIALA, Lucie KREJČÍ a Anna NEZDAŘILOVÁ. Analysis of mechanical properties of printed polyamid PA11. In: Experimental Stress Analysis - 58th International Scientific Conference, EAN 2020. Ostrava: VSB-Technical University of Ostrava, 2020. s. 93-97. ISBN 978-80-248-4451-0. [Detail]

ANTIC, A., M. MILOSEVIC, Robert ČEP a N. UNGUREANU. A texture based descriptors used for real time tool condition monitoring. In: IOP Conference Series: Materials Science and Engineering. Volume 749. Bristol: IOP Publishing, 2020. s. nestránkováno. ISBN 0-000-00000-0. [Detail]

SZKANDERA, Pavel, Marek SADÍLEK, Stanislav RUSZ, Pavel DOSTÁL, Jaroslav DUBSKÝ, Jan ZELINKA a Ondřej KOTÁSEK. Increasing the mechanical properties of DC01 steel by the drece method of severe plastic deformation. In: METAL 2020 : 29th International Conference on Metallurgy and Materials : conference proceedings : May 20-22, 2020, Brno, Czech Republic, EU. Ostrava: Tanger, 2020. s. 302-307. ISBN 978-80-87294-97-0. [Detail]

ZELINKA, Jan, Lenka ČEPOVÁ, Bartosz GAPINSKI, Robert ČEP, Ondřej MIZERA a Radek HRUBÝ. The Effect of a Stylus Tip on Roundness Deviation with Different Roughness. In: ADVANCES IN MANUFACTURING II, VOL 5 - METROLOGY AND MEASUREMENT SYSTEMS. BERLIN: SPRINGER-VERLAG BERLIN, 2019. s. 147-157. ISBN 978-3-030-18682-1. [Detail]

MIZERA, Ondřej, Lenka ČEPOVÁ, Marek SADÍLEK, Robert ČEP, Radek HRUBÝ a Jan ZELINKA. The Problems of Measuring Selected Geometric Deviations on a CMM After Machining. In: ADVANCES IN MANUFACTURING II, VOL 5 - METROLOGY AND MEASUREMENT SYSTEMS. BERLIN: SPRINGER-VERLAG BERLIN, 2019. s. 158-171. ISBN 978-3-030-18682-1. [Detail]

HALAMA, Radim, Marek PAGÁČ, Zbyněk PAŠKA, Pavel PAVLÍČEK a Xu CHEN. RATCHETING BEHAVIOUR OF 3D PRINTED AND CONVENTIONALLY PRODUCED SS316L MATERIAL. In: American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP. Volume 8, 2019. New York: American Society of Mechanical Engineers, 2019. s. 1-6. ISBN 978-0-7918-5901-8. [Detail]

FUSEK, Martin, Zdeněk PORUBA, Radim HALAMA, Radomír BĚLÍK, Ondřej FRANTIŠEK, Markus SCHNEIDER, Veronica BIAGINI a Marek SADÍLEK. Influence of loading speed on yield strength value of S235 and C45 steels. In: Experimental Stress Analysis - 57th International Scientific Conference, EAN 2019 - Conference Proceedings. Praha: Czech Society for Mechanics, 2019. s. 102-105. ISBN 978-80-214-5766-9. [Detail]

MĚSÍČEK, Jakub, Jana PETRŮ, Tomáš ZLÁMAL, Marek PAGÁČ, Jiří ŠEDIVÝ, Ondřej VORTEL a Lukáš DRÁBEK. The use of technology local heating by laser for turning of difficult to machine materials. In: Lecture Notes in Mechanical Engineering : advances in manufacturing engineering and materials. Cham: Springer, 2019. s. 290-298. ISBN 978-3-319-99352-2. [Detail]

RUSZ, Stanislav, Jiří ŠVEC, Ondřej HILŠER, Rostislav ZABYSTRZAN, Vratislav MAREŠ a Marcel KLOS. Influence of severe plastic deformation process on mechanical properties of low carbon steel. In: METAL 2019 : 28th International Conference on Metallurgy and Materials : abstracts : May 22nd-24th 2019, Hotel Voronez I, Brno, Czech Republic, EU. Ostrava: Tanger, 2019. s. 1962-1967. ISBN 978-80-87294-92-5. [Detail]

MUSIL, Václav, Marek SADÍLEK, Jiří KRATOCHVÍL, Robert ČEP a Jiří LICHOVNÍK. Evaluation of finishing machining of stainless steel 1.4307. In: METAL 2019 : conference proceedings : peer reviewed : 28th International Conference on Metallurgy and Materials : May 22nd-24th 2019, Hotel Voronez I, Brno, Czech Republic, EU. Ostrava: Tanger, 2019. s. 1103-1109. ISBN 978-80-87294-92-5. [Detail]

ZELINKA, Jan, Marek SADÍLEK, Pavel SZKANDERA, Ondřej MIZERA a Lenka ČEPOVÁ. The surface roughness of the machined surface of multiaxial milling. In: METAL 2019 : conference proceedings : peer reviewed : 28th International Conference on Metallurgy and Materials : May 22nd-24th 2019, Hotel Voronez I, Brno, Czech Republic, EU. Ostrava: Tanger, 2019. s. 1197-1202. ISBN 978-80-87294-92-5. [Detail]

ZLÁMAL, Tomáš, Šárka MALOTOVÁ, Tomáš SZOTKOWSKI, Antonín TREFIL a Ondřej VORTEL. Machining of nickel alloy by cutting tool with prepared cutting edge preparation. In: METAL 2019 : conference proceedings : peer reviewed : 28th International Conference on Metallurgy and Materials : May 22nd-24th 2019, Hotel Voronez I, Brno, Czech Republic, EU. Ostrava: Tanger, 2019. s. 1761 - 1767. ISBN 978-80-87294-92-5. [Detail]

RUSZ, Stanislav, Ondřej HILŠER, Pavel SZKANDERA, Rostislav ZABYSTRZAN, Jiří ŠVEC, Vratislav MAREŠ a Marcel KLOS. Influence of severe plastic deformation process on mechanical properties of low carbon steel. In: METAL 2019 : conference proceedings : peer reviewed : 28th International Conference on Metallurgy and Materials : May 22nd-24th 2019, Hotel Voronez I, Brno, Czech Republic, EU. Ostrava: Tanger, 2019. s. 473-476. ISBN 978-80-87294-92-5. [Detail]

TILL, Jakub, Stanislav RUSZ, Jakub MICHALSKI, Lubomír ČÍŽEK, Stanislav TYLŠAR, Michal SALAJKA, Jan KEDROŇ, Karel MALANÍK, Tibor DONIC a Eugeniusz HADASIK. Change of geometry of ECAP channel to increase deformation intensity by SPD process of AlMn1Cu and AZ 31 alloys. In: METAL 2019 : conference proceedings : peer reviewed : 28th International Conference on Metallurgy and Materials : May 22nd-24th 2019, Hotel Voronez I, Brno, Czech Republic, EU. Ostrava: Tanger, 2019. s. 489-494. ISBN 978-80-87294-92-5. [Detail]

ZLÁMAL, Tomáš, Šárka MALOTOVÁ, Tomáš SZOTKOWSKI, Robert ČEP a I.D. MARINESCU. The geometry of grooving tool and its influence on dynamic load system for turning. In: TRANSCOM 2019 : 13th International Scientific Conference of Young Scientists on Sustainable, Modern and Safe Transport : book of abstracts : High Tatras, Grand Hotel Bellevue, 29 - 31 May 2019, Slovak Republic. Žilina: University of Žilina, 2019. s. 602-609. ISBN 978-80-554-1565-9. [Detail]

HRUBÝ, Radek, Lenka ČEPOVÁ, Robert ČEP, Ondřej MIZERA a Jan ZELINKA. Measurement of small complex shapes. In: Transportation Research Procedia. Volume 40. Amsterdam: Elsevier, 2019. s. 251-258. ISBN 0-000-00000-0. [Detail]

MOHYLA, Petr, Kristýna STERNADELOVÁ, Lucie KREJČÍ a Marek PAGÁČ. Analysis of welded joint properties on a tube manufactured by SLM technology. In: Zeszyt abstraktów międzynarodowej konferencji Material Technologies in Silesia’ 2019 : 13-16 października 2019, Zawiercie. Gliwice: Politechnika Śląska Gliwice, 2019. s. 107-108. ISBN 978-83-65138-24-8. [Detail]

MĚSÍČEK, Jakub, Aleš SLÍVA a Jana PETRŮ. Využití kompozitních materiálů v dopravních prostředcích. In: 44. mezinárodní konference kateder dopravních, manipulačních, stavebních a zemědělských strojů : Kurdějov 11. až 12.9. 2018. Brno: Vysoké učení technické v Brně, Fakulta strojního inženýrství, 2018. s. 150-155. ISBN 978-80-214-5644-0. [Detail]

RADEK, N., I. PLISZKA, A. GADEK-MOSZCZAK, J. ROLEK a Jana PETRŮ. Properties of carbide electro-spark coatings after laser processing. In: AIP Conference Proceedings. Volume 2017. Melville: American Institute of Physics, 2018. s. nestránkováno. ISBN 978-0-7354-1735-9. [Detail]

ŠVEC, Jiří, Pavel SZKANDERA, Stanislav RUSZ, Ondřej HILŠER a Jana PETRŮ. Refining Structure of Copper by SPD process. In: IOP Conference Series: Materials Science and Engineering. Volume 461. Bristol: IOP Publishing, 2018. s. nestránkováno. ISBN 0-000-00000-0. [Detail]

SKOTNICOVÁ, Kateřina, G.S. BURKHANOV, Tomáš ČEGAN, N.B. KOLCHUGINA, A.A. LUKIN, Ondřej ŽIVOTSKÝ, Pavel PROKOFEV, Miroslav KURSA, Jan JUŘICA, Y. KOSHKID'KO a H. DRULIS. Optimizing the microstructure of sintered Nd-Fe-B magnets via the application of scandium hydride. In: Journal of Physics: Conference Series. Volume 1134. Bristol: IOP Publishing, 2018. s. "012055". ISBN 0-000-00000-0. [Detail]

SAJGALIK, M., T. CZANOVA, L. ZAUSKOVA, M. DRBUL, Marek SADÍLEK a Jan VALÍČEK. Triaxial analysis of residual stress in surface layers after high feed machining using X-ray diffractometer. In: MATEC Web of Conferences. Volume 137. Paříž: EDP Sciences, 2018. s. 1-5. ISBN 978-2-7598-9027-9. [Detail]

ČEP, Robert, Šárka MALOTOVÁ, Jiří KRATOCHVÍL, Dana STANČEKOVÁ a Andrej CZÁN. Diagnosis of machine tool with using Renishaw ball-bar system. In: MATEC Web of Conferences. Volume 157. Paříž: EDP Sciences, 2018. s. 1-7. ISBN 0-000-00000-0. [Detail]

ZLÁMAL, Tomáš, Šárka MALOTOVÁ, Jana PETRŮ, Zbigniew BRYTAN a Václav MUSIL. The evaluation of the surface quality after laser cutting. In: MATEC Web of Conferences. Volume 244. Paříž: EDP Sciences, 2018. s. 1-7. ISBN 0-000-00000-0. [Detail]

HAJNYŠ, Jiří, Marek PAGÁČ, Tomáš ZLÁMAL, Jana PETRŮ a Lukáš KOUSAL. Stiffness of 316L stainless steel support structures proposed for the SLM process. In: MATEC Web of Conferences. Volume 244. Paříž: EDP Sciences, 2018. s. 64-72. ISBN 0-000-00000-0. [Detail]

KRATOCHVÍL, Jiří, Marek SADÍLEK a J MRAZIK. The effect of chip former on power loading of recessing tool. In: MATEC Web of Conferences. Volume 244. Paříž: EDP Sciences, 2018. s. nestránkováno. ISBN 0-000-00000-0. [Detail]

STRUNG, Václav, Ivo SZURMAN, Martin POHLUDKA, Daniel PETLÁK a Jiřina VONTOROVÁ. Microstructure and purity of the NiTiZr-based alloys prepared by a plasma metallurgy process. In: METAL 2018 : conference proceedings : reviewed version : 27th International Conference on Metallurgy and Materials : May 23rd-25th 2018, Hotel Voronez I, Brno, Czech Republic, EU. Ostrava: Tanger, 2018. s. 1734-1739. ISBN 978-80-87294-84-0. [Detail]

ZLÁMAL, Tomáš, Jana PETRŮ, Šárka MALOTOVÁ, Robert ČEP a Jiří HAJNYŠ. The influence of microgeometry of cutting tool on dynamic load of system. In: METAL 2018 : conference proceedings : reviewed version : 27th International Conference on Metallurgy and Materials : May 23rd-25th 2018, Hotel Voronez I, Brno, Czech Republic, EU. Ostrava: Tanger, 2018. s. 1795-1800. ISBN 978-80-87294-84-0. [Detail]

MICHALSKI, Jakub, Jakub TILL, Jana PETRŮ, František ŠPALEK, Stanislav RUSZ a Jiří ŠVEC. The effect of severe plastic deformation on the mechanical properties and structure of brass. In: METAL 2018 : conference proceedings : reviewed version : 27th International Conference on Metallurgy and Materials : May 23rd-25th 2018, Hotel Voronez I, Brno, Czech Republic, EU. Ostrava: Tanger, 2018. s. 419-425. ISBN 978-80-87294-84-0. [Detail]

TILL, Jakub, Jakub MICHALSKI, Jana PETRŮ a František ŠPALEK. Utilization of the process of severe plastic deformation in increasing the quality of the CU sheet metal strip. In: METAL 2018 : conference proceedings : reviewed version : 27th International Conference on Metallurgy and Materials : May 23rd-25th 2018, Hotel Voronez I, Brno, Czech Republic, EU. Ostrava: Tanger, 2018. s. 487-494. ISBN 978-80-87294-84-0. [Detail]

MUSIL, Václav, Marek SADÍLEK, Robert ČEP, Lenka ČEPOVÁ, Jiří KRATOCHVÍL a Lukáš KUŠNÍR. Decreasing the surface roughness of the seating surfaces of ball valves. In: METAL 2018 : conference proceedings : reviewed version : 27th International Conference on Metallurgy and Materials : May 23rd-25th 2018, Hotel Voronez I, Brno, Czech Republic, EU. Ostrava: Tanger, 2018. s. 801-807. ISBN 978-80-87294-84-0. [Detail]

PAGÁČ, Marek, Jiří HAJNYŠ, Šárka MALOTOVÁ, Tomáš ZLÁMAL a Jana PETRŮ. The influence of the laser power on the utility properties of the surface roughness parameter of the overhangs during the SLM proces. In: METAL 2018 : conference proceedings : reviewed version : 27th International Conference on Metallurgy and Materials : May 23rd-25th 2018, Hotel Voronez I, Brno, Czech Republic, EU. Ostrava: Tanger, 2018. s. 814-819. ISBN 978-80-87294-84-0. [Detail]

SZOTKOWSKI, Tomáš a Ivan MRKVICA. JIG design for disassembly of undercarriage component. In: METAL 2018 : conference proceedings : reviewed version : 27th International Conference on Metallurgy and Materials : May 23rd-25th 2018, Hotel Voronez I, Brno, Czech Republic, EU. Ostrava: Tanger, 2018. s. 879-884. ISBN 978-80-87294-84-0. [Detail]

ČEPOVÁ, Lenka, Andrea KOVÁČIKOVÁ, Marek SADÍLEK a Robert ČEP. GRR analysis and its graphical and numerical outputs. In: WMSCI 2018 - 22nd World Multi-Conference on Systemics, Cybernetics and Informatics, Proceedings. Winter Garden: International Institute of Informatics and Systematics, 2018. s. 43-47. ISBN 978-1-941763-82-7. [Detail]

ŠMACH, Jiří, Michal ŠOFER, Lenka ČEPOVÁ a Radim HALAMA. Problematics of twin-disc wear resistance tests for selected wheel rim materials. In: Experimental Stress Analysis 2017: 55th international scientific conference : May 30th - June 1st, 2017, Nový Smokovec, Slovakia : book of extended abstracts. Košice: Technical University of Košice, 2017. s. 50-56. ISBN 978-80-553-3167-6. [Detail]

ČEP, Robert, Šárka MALOTOVÁ, Tomáš ZLÁMAL, Vladimír VRBA a Marian BORZAN. Tracking of the development wear of cutting tools with different geometry during parting-off. In: MATEC Web of Conferences. Volume 137. Paříž: EDP Sciences, 2017. s. 1-8. ISBN 978-2-7598-9027-9. [Detail]

ČEPOVÁ, Lenka, Marek SADÍLEK, Robert ČEP a Dagmar MIKULOVÁ. Příspěvek k hodnocení funkčních ploch tělesa kulového kohoutu. In: METAL 2017: conference proceedings : 26th International Conference on Metallurgy and Materials : (reviewed version) : May 24th-26th 2017, Hotel Voroněž I, Brno, Czech Republic, EU. Ostrava: Tanger, 2017. s. 1207-1213. ISBN 978-80-87294-79-6. [Detail]

MUSIL, Václav, Jiří KRATOCHVÍL, Robert ČEP, Marek SADÍLEK, František ŠPALEK a Marek PAGÁČ. Effective finishing apertures using roughness criterion RA = 0.2 μm. In: METAL 2017: conference proceedings : 26th International Conference on Metallurgy and Materials : (reviewed version) : May 24th-26th 2017, Hotel Voroněž I, Brno, Czech Republic, EU. Ostrava: Tanger, 2017. s. 1338-1343. ISBN 978-80-87294-79-6. [Detail]

RUSZ, Stanislav, Martin KRAUS, Ondřej HILŠER, Jiří ŠVEC, Jan KEDROŇ, Lubomír ČÍŽEK, Tibor DONIČ, Tomasz TAŃSKI a Lucie KREJČÍ. Increasing the quality of DC01 steel by drece method. In: METAL 2017: conference proceedings : 26th International Conference on Metallurgy and Materials : (reviewed version) : May 24th-26th 2017, Hotel Voroněž I, Brno, Czech Republic, EU. Ostrava: Tanger, 2017. s. 527-532. ISBN 978-80-87294-79-6. [Detail]

SCHIFFNER, Jan, Tomáš ZLÁMAL, Jana PETRŮ a Robert ČEP. Technology of Machining of Thermal Sprayed Coatings. In: METAL 2017: conference proceedings : 26th International Conference on Metallurgy and Materials : (reviewed version) : May 24th-26th 2017, Hotel Voroněž I, Brno, Czech Republic, EU. Ostrava: Tanger, 2017. s. 1444-1449. ISBN 978-80-87294-79-6. [Detail]

HILŠER, Ondřej, František ŠPALEK, Stanislav RUSZ, Dariusz KUC, Eugeniusz HADASIK a Przemysław SNOPIŃSKI. Lithium containing AZ31 magnesium alloy processed by ECAP. In: METAL 2017: conference proceedings : 26th International Conference on Metallurgy and Materials : (reviewed version) : May 24th-26th 2017, Hotel Voroněž I, Brno, Czech Republic, EU. Ostrava: Tanger, 2017. s. 1738-1745. ISBN 978-80-87294-79-6. [Detail]

PAGÁČ, Marek, Šárka MALOTOVÁ, Tomáš ZLÁMAL, Jana PETRŮ a Jiří KRATOCHVÍL. Evaluation of chosen parameters of surface roughness (microgeometry) on the samples from stainless steel 316L and manufactured by the additive technology SLM. In: METAL 2017: conference proceedings : 26th International Conference on Metallurgy and Materials : (reviewed version) : May 24th-26th 2017, Hotel Voroněž I, Brno, Czech Republic, EU. Ostrava: Tanger, 2017. s. 956-961. ISBN 978-80-87294-79-6. [Detail]

PAGÁČ, Marek, Jiří HAJNYŠ, Jana PETRŮ, Tomáš ZLÁMAL a Michal ŠOFER. The study of mechanical properties stainless steel 316L after production from metal powder with using additive technology and by method selective laser melting. In: METAL 2017: conference proceedings : 26th International Conference on Metallurgy and Materials : (reviewed version) : May 24th-26th 2017, Hotel Voroněž I, Brno, Czech Republic, EU. Ostrava: Tanger, 2017. s. 962-967. ISBN 978-80-87294-79-6. [Detail]

PIESOVA, Marianna, Andrej CZAN, Michal SAJGALIK, Tatiana CZANOVA a Robert ČEP. Experimental quantification of the austenitic phase in steels using the Average peak method of x-ray diffractometry. In: Procedia Engineering. Volume 192. Amsterdam: Elsevier, 2017. s. 689-694. ISBN 0-000-00000-0. [Detail]

KRATOCHVÍL, Jiří, Marek SADÍLEK a Marek PAGÁČ. LAYER OF THE TOOL TESTING DURING CUTTING MATERIAL X120MN12. In: METAL 2016 : 25th Anniversary International Conference on Metallurgy and Materials : list of abstracts : May 25th-27th 2016, Hotel Voroněž I, Brno, Czech Republic, EU. Ostrava: Tanger, 2016. s. 1096-1102. ISBN 978-80-87294-67-3. [Detail]

ŠPALEK, František, Jana PETRŮ, Miroslav TROCHTA, Slavomíra HAŠOVÁ a Sergej HLOCH. DEPENDENCE OF MANUFACTURING PRECISION OF WEDM CUTTING TECHNOLOGY ON POROSITY OF ALUMINUM FOAM. In: METAL 2016 : 25th Anniversary International Conference on Metallurgy and Materials : list of abstracts : May 25th-27th 2016, Hotel Voroněž I, Brno, Czech Republic, EU. Ostrava: Tanger, 2016. s. 1534-1539. ISBN 978-80-87294-66-6. [Detail]

PAGÁČ, Marek, Šárka MALOTOVÁ, Marek SADÍLEK, Jana PETRŮ, Tomáš ZLÁMAL a Jiří KRATOCHVÍL. INFLUENCE OF EFFECTIVE MILLING STRATEGIES ON THE RESIDUAL STRESS. In: METAL 2016 : 25th Anniversary International Conference on Metallurgy and Materials : list of abstracts : May 25th-27th 2016, Hotel Voroněž I, Brno, Czech Republic, EU. Ostrava: Tanger, 2016. s. 819-824. ISBN 978-80-87294-67-3. [Detail]

PETRŮ, Jana, Jan SCHIFFNER, Tomáš ZLÁMAL, Robert ČEP, Jiří KRATOCHVÍL a Dana STANČEKOVÁ. CHIP BREAKER OF CUTTING TOOL AND ITS INFLUENCE AT DYNAMIC FORCE OF MACHINING TITANIUM ALLOY TI(6)AL(4)V. In: METAL 2016: conference proceedings : (reviewed version) : 25th Anniversary International Conference on Metallurgy and Materials : May 25th-27th 2016, Hotel Voronez I, Brno, Czech Republic, EU. Ostrava: Tanger, 2016. s. 855-860. ISBN 978-80-87294-67-3. [Detail]

PETRŮ, Jana, Tomáš ZLÁMAL, Robert ČEP, Dana STANČEKOVÁ, Marek PAGÁČ a Ondřej VORTEL. Mechanisms of cutting insert wear and their influence on cutting ability of the tool during machining of special alloys. In: 3rd International Conference on Manufacturing Engineering and Technology for Manufacturing Growth (METMG 2015) : Proceedings Papers. Newark: Information Engineering Research Institute, 2015. s. 36-40. ISBN 978-1-61275-074-3. [Detail]

THEISZ, Günther, Karel FRYDRÝŠEK, František FOJTÍK, Tomáš KUBÍN, Luboš PEČENKA, Jiří DEMEL, Roman MADEJA, Marek SADÍLEK, Jiří KRATOCHVÍL a Leopold PLEVA. Medial plate for treatment of distal tibia fractures. In: Experimental Stress Analysis 2015 : 53rd international conference : June 1-4, 2015, Český Krumlov, Czech Republic : book of extended abstracts. Praha: Czech Technical University in Prague, 2015. s. 431-437. ISBN 978-80-01-05734-6. [Detail]

PETRŮ, Jana, Jan SCHIFFNER, Tomáš ZLÁMAL, Robert ČEP, Jiří KRATOCHVÍL a Dana STANČEKOVÁ. WEAR PROGRESS OF EXCHANGEABLE CUTTING INSERTS DURING TI(6)AL(4)V ALLOY MACHINING. In: METAL 2015 : 24th International Conference on Metallurgy and Materials : conference proceedings : June 3rd-5th 2015, Hotel Voroněž I, Brno, Czech Republic, EU. Ostrava: Tanger, 2015. s. 1147-1155. ISBN 978-80-87294-62-8. [Detail]

STANČEKOVÁ, Dana, Michal ŠAJGALÍK, Jana PETRŮ, Nataša NÁPRSTKOVÁ a Pavol BALÁŽ. IMPLEMENTATION OF COATING FOR FAILURE ELIMINATION OF DIAL GAUGES. In: METAL 2015 : 24th International Conference on Metallurgy and Materials : conference proceedings : June 3rd-5th 2015, Hotel Voroněž I, Brno, Czech Republic, EU. Ostrava: Tanger, 2015. s. 1162-1169. ISBN 978-80-87294-62-8. [Detail]

GOLA, Lukáš, Vojtěch VÁCLAVÍK, Tomáš DVORSKÝ a Jan VALÍČEK. Návrh protipovodňové ochrany v katastru obce Bolatice. In: Aktuální vodohospodářské problémy : konference s mezinárodní účastí : 8.9.-10.9.2014, Hotel Davidův mlýn, Staré Těchanovice. Ostrava: VŠB - Technická univerzita Ostrava, 2014. s. 65-72. ISBN 978-80-248-3541-9. [Detail]

PETRŮ, Jana, Tomáš ZLÁMAL, Robert ČEP a Marek PAVLICA. The Using of Elements o Lean Production to Increase Efficiency and Competitiveness of Organizations in the Engineering Industry. In: Fourth International Conference on Industrial Engineering and Operations Management (IEOM 2014) : Bali, Indonesia, January 7-9, 2014. [Indonésie]: IEOM Society, 2014. s. 802-811. ISBN 978-0-9855497-1-8. [Detail]

GREGUŠOVÁ, Markéta, Ivana ŠAJDLEROVÁ, Martin ZUSKÁČ, Jan KEDROŇ a Jana PETRŮ. Expanding Knowledge of Students of Engineering Using E-Learning. In: Fourth International Conference on Industrial Engineering and Operations Management (IEOM 2014) : Bali, Indonesia, January 7-9, 2014. [Indonésie]: IEOM Society, 2014. s. 879 - 888. ISBN 978-0-9855497-1-8. [Detail]

PETRŮ, Jana, Lenka PETŘKOVSKÁ, Tomáš ZLÁMAL a Ivan MRKVICA. Resistance of Sintered Carbide Materials against Heat Shocks Induced by Cutting Process. In: METAL 2014 : 23rd International Conference on Metallurgy and Materials : conference proceedings : May 21st-23rd 2014, hotel Voroněž I, Brno, Czech Republic, EU. Ostrava: Tanger, 2014. s. 1-6. ISBN 978-80-87294-52-9. [Detail]

PETŘKOVSKÁ, Lenka, Jana PETRŮ, Jiří KRATOCHVÍL a Marek SADÍLEK. Chip Formation during Milling of Stainless Steels. In: METAL 2014 : 23rd International Conference on Metallurgy and Materials : conference proceedings : May 21st-23rd 2014, hotel Voroněž I, Brno, Czech Republic, EU. Ostrava: Tanger, 2014. s. 1-6. ISBN 978-80-87294-52-9. [Detail]

PAVLICA, Marek a Marek SADÍLEK. Mechanické testování navrženého lepeného spoje. In: Mezinárodní konference výrobních technologií při příležitosti 50. výročí založení Katedry obrábění a montáže Fakulty strojní VŠB-TU Ostrava : 3.-5. září 2014, Hotel Bauer, Bílá. Ostrava: VŠB - Technická univerzita Ostrava, 2014. s. 42. ISBN 978-80-248-3518-1. [Detail]

VÁCLAVÍK, Vojtěch, Tomáš DVORSKÝ, Aleš BŘENEK, Jaromír DAXNER, Jan VALÍČEK, Milena KUŠNEROVÁ a Miroslava BENDOVÁ. Tepelně izolační účinek malty s polyuretanovým plnivem v závislosti na vlhkosti. In: Životné prostredie - problémy a možnosti riešenia : ovzdušie, voda, poda : zborník publikácií zo IV. ročníka odbornej konferencie s medzinárodnou účasťou : 7.-9.4.2014, Hotel Sorea Titris, Tatranská Lomnica. Bratislava: ELSEWA, 2014. s. 128-136. ISBN 978-80-89385-28-7. [Detail]

ZLÁMAL, Tomáš, Jana PETRŮ, Marek SADÍLEK, Marek PAGÁČ, Josef BRYCHTA a Juraj SUROVSKÝ. Durability and Wear of Exchangeable Coated Inserts after Machining the Ni-625 Alloy. In: 5th International Scientific and Expert Conference of the International TEAM Society (Technique, Education, Agriculture & Management) : Prešov, 4th-6th November 2013. Slavonski Brod: TEAM Society, 2013. s. 315-319. ISBN 0-000-00000-0. [Detail]

ČEP, Robert, Adam JANÁSEK, Jana PETRŮ a Ondřej DUPALA. Experimental Testing of Ceramic Cutting Inserts at Irregular Interrupted Cutting Process. In: IMETI 2013 - 6th International Multi-Conference on Engineering and Technological Innovation, Proceedings 2013. [Spojené státy americké]: [s.n.], 2013. s. 145-149. ISBN 978-1-936338-92-4. [Detail]

PETRŮ, Jana, Tomáš ZLÁMAL, Robert ČEP, Marek PAGÁČ a Martin GREPL. Influence of Strengthening Effect on Machinability of the Welded Inconel 625 and of the Wrought Inconel 625. In: IMETI 2013 - 6th International Multi-Conference on Engineering and Technological Innovation, Proceedings 2013. [Spojené státy americké]: [s.n.], 2013. s. 155-159. ISBN 978-1-936338-92-4. [Detail]

HARNIČÁROVÁ, Marta, Jan VALÍČEK, Robert ČEP, Jana PETRŮ a Lenka ČEPOVÁ. Surface Integrity Analysis in Laser Beam Cutting Process. In: METAL 2013 : 22nd International Conference on Metallurgy and Materials : conference proceedings : May 15th - 17th 2013, Hotel Voronez I, Brno Czech Republic, EU [CD-ROM]. Ostrava: Tanger, 2013. s. 1-6. ISBN 978-80-87294-41-3. [Detail]

ČEP, Robert, Jana PETRŮ, Tomáš ZLÁMAL, Jan VALÍČEK, Marta HARNIČÁROVÁ, Adam JANÁSEK a Lenka ČEPOVÁ. INFLUENCE OF FEED SPEED ON MACHINED SURFACE QUALITY. In: METAL 2013 : 22nd International Conference on Metallurgy and Materials : conference proceedings : May 15th - 17th 2013, Hotel Voronez I, Brno Czech Republic, EU [CD-ROM]. Ostrava: Tanger, 2013. s. 1033-1038. ISBN 978-80-87294-41-3. [Detail]

KRATOCHVÍL, Jiří a Lenka PETŘKOVSKÁ. Monitoring the Behavior of Resistive Layers on the Inserts of Nitride Cutting Ceramics During Longitudinal Turning of Steel. In: METAL 2013 : 22nd International Conference on Metallurgy and Materials : conference proceedings : May 15th - 17th 2013, Hotel Voronez I, Brno Czech Republic, EU [CD-ROM]. Ostrava: Tanger, 2013. s. 131-131. ISBN 978-80-87294-41-3. [Detail]