SCHINDLEROVÁ, Vladimíra and ŠAJDLEROVÁ, Ivana. USE OF THE DYNAMIC SIMULATION TO REDUCE HANDLING COMPLEXITY IN THE MANUFACTURING PROCESS. Online. Advances in science and technology-research journal. 2019, Vol. 14, no. 1, p. 81-88. ISSN 2299-8624. Available from: http://www.astrj.com/Use-of-the-Dynamic-Simulation-to-Reduce-Handling-Complexity-in-the-Manufacturing,113616,0,2.html.
Detail

SNOPIŃSKI, Przemysław; TAŃSKI, Tomasz; MATUS, Krzysztof and RUSZ, Stanislav. Microstructure, grain refinement and hardness of Al-3%Mg aluminium alloy processed by ECAP with helical die. Online. Archives of Civil and Mechanical Engineering. 2019, Vol. 19, no. 2, p. 287-296. ISSN 1644-9665. Available from: https://www.sciencedirect.com/science/article/pii/S1644966518301304.
Detail

DUTKIEWICZ, Jan; RUSZ, Stanislav; HILŠER, Ondřej; TAŃSKI, Tomasz; BOREK, Wojciech; SZLEZYNGER, Maciej; BOBROWSKI, Piotr and MAZIARZ, Wojciech. Structure of MgLiAl alloys after various routes of severe plastic deformation studied by TEM. Online. International journal of materials research. 2019, Vol. 110, no. 1, p. 24-31. ISSN 1862-5282. Available from: https://www.hanser-elibrary.com/doi/abs/10.3139/146.111680.
Detail

ŠOFER, Michal; KUČERA, Pavel; MAZANCOVÁ, Eva and KREJČÍ, Lucie. Acoustic Emission and Fractographic Analysis of Seamless Steel Pressure Cylinders with Artificial Flaws Under Hydrostatic Burst Testing. Online. Journal of Nondestructive Evaluation. 2019, Vol. 38, no. 3, p. 1-13. ISSN 0195-9298. Available from: https://link.springer.com/article/10.1007%2Fs10921-019-0627-0#citeas.
Detail

FUGLÍČEK, Ladislav. Increase of production productivity using the combined machining in one clamping. Online. MM Science Journal. 2019, Vol. 2019, no. October, p. 2952-2956. ISSN 1803-1269. Available from: https://www.mmscience.eu/journal/issues/October%202019/articles/increase-of-production-productivity-using-the-combined-machining-in-one-clamping.
Detail

RUSZ, Stanislav; HILŠER, Ondřej; OCHODEK, Vladislav; ČADA, Radek; ŠVEC, Jiří and SZKANDERA, Pavel. Influence of SPD Process on Low-Carbon Steel Mechanical Properties. Online. MM Science Journal. 2019, Vol. 12, no. 2, p. 2910-2914. ISSN 1803-1269. Available from: https://www.mmscience.eu/journal/issues/june-2019/articles/influence-of-spd-process-on-low-carbon-steel-mechanical-properties.
Detail

KREJČÍ, Lucie; SCHINDLEROVÁ, Vladimíra; BUČKO, Michal; HLAVATÝ, Ivo and MICIAN, M.. The Application of PFMEA for Roller Bearings Production. Online. Manufacturing Technology. 2019, Vol. 19, no. 3, p. 439-445. ISSN 1213-2489. Available from: https://www.scopus.com/record/display.uri?origin=resultslist&eid=2-s2.0-85069885215.
Detail

MODROVSKÝ, Radek. Optimization of Production Flow through the CRAFT Method. Online. Manufacturing Technology. 2019, Vol. 2019, no. 1, p. 114-117. ISSN 1213-2489. Available from: http://journal.strojirenskatechnologie.cz/.
Detail

KOZÁK, Jindřich; KREJČÍ, Lucie; HLAVATÝ, Ivo; SAMARDŽIČ, Ivan and ČEP, Robert. AN ANALYSIS OF STRUCTURES OCCURRING IN WELD DEPOSIT OF STEEL S235JR N WITH TUNGSTEN CARBIDE PARTICLES AND MARTENSITIC MATRIX. Online. Metalurgija. 2019, Vol. 58, no. 3-4, p. 235-238. ISSN 0543-5846. Available from: https://hrcak.srce.hr/index.php?show=clanak&id_clanak_jezik=318824.
Detail

MALOTOVÁ, Šárka; ČEP, Robert; ZLÁMAL, Tomáš; MOHYLA, Petr; CZAN, Andrej; ANTIC, Aco; BUDAK, Igor and MIRCEA, Lobontiu. Evaluation of Residual Stresses after Irregular Interrupted Machining. Online. Tehnički vjesnik – Technical Gazette. 2019, Vol. 25, no. 4, p. 1009-1013. ISSN 1330-3651. Available from: http://hhttps://www.researchgate.net/publication/327385283_Evaluation_of_Residual_Stresses_after_Irregular_Interrupted_Machi.
Detail

RUDAWSKA, Anna; MALCZARSKI, Mateusz; STANCEKOVA, Dana; WAHAB, Magd Abdel and SCHINDLEROVÁ, Vladimíra. MECHANICAL PROPERTIES OF HAND-MAKING POLYESTER COMPOSITES. Online. Advances in science and technology-research journal. 2018, Vol. 12, no. 2, p. 112-120. ISSN 2299-8624. Available from: http://www.astrj.com/MECHANICAL-PROPERTIES-OF-HAND-MAKING-POLYESTER-COMPOSITES,91891,0,2.html.
Detail

MICIAN, M.; KONAR, R.; HLAVATÝ, Ivo; WINCZEK, J. and GUCWA, M.. The Repair of Foundry Defects in Steel Castings Using Welding Technology. Archives of Foundry Engineering. 2018, Vol. 18, no. 2, p. 177-180. ISSN 1897-3310.
Detail

DUTKIEWICZ, Jan; RUSZ, Stanislav; KUC, Dariusz; HILŠER, Ondřej; BOBROWSKI, Piotr and KANIA, Bogusz. Microstructure and texture changes of MgLiAl alloys composed of α or α + β phases after twist channel angular pressing (TCAP). Online. Archives of Metallurgy and Materials. 2018, Vol. 63, no. 4, p. 1827-1835. ISSN 1733-3490. Available from: http://www.imim.pl/files/archiwum/Vol4_2018/33.pdf.
Detail

KOWALCZYK, Karolina; JABLOŃSKA, Magdalena; RUSZ, Stanislav and JUNAK, Grzegorz. Influence of recrystallization annealing on the properties and structure of low-carbon ferritic steel if. Online. Archives of Metallurgy and Materials. 2018, Vol. 63, no. 4, p. 1957-1961. ISSN 1733-3490. Available from: http://www.imim.pl/files/archiwum/Vol4_2018/52.pdf.
Detail

KOWALCZYK, Karolina; JABLOŃSKA, Magdalena; RUSZ, Stanislav and BEDNARCZYK, Iwona. Influence of the Drece process of severe plastic deformation on the mechanical properties of the ultra-low carbon interstitial free steel. Online. Archives of Metallurgy and Materials. 2018, Vol. 63, no. 4, p. 2095-2100. ISSN 1733-3490. Available from: http://www.imim.pl/files/archiwum/Vol4_2018/70.pdf.
Detail

MICHALSKI, Jakub; TILL, Jakub; PETRŮ, Jana; RUSZ, Stanislav; HILŠER, Ondřej and VONTOROVÁ, Jiřina. AZ31 magnesium alloy subjected to severe plastic deformation at different temperatures: Microstructure and hardness. IOP Conference Series: Materials Science and Engineering. Volume 385. 2018, Vol. 461, no. 1, p. 1-6. ISSN 1757-8981.
Detail

FUGLÍČEK, Ladislav. Production enhancement through using a continuous system of winding electric machines. MM Science Journal. 2018, Vol. 2018, no. June, p. 2358-2362. ISSN 1803-1269.
Detail

SRIVASTAVA, Madhulika; HLOCH, Sergej; KREJČÍ, Lucie; CHATTOPADHYAYA, Somnath; DIXIT, Amit Rai and FOLDYNA, Josef. Residual stress and surface properties of stainless steel welded joints induced by ultrasonic pulsed water jet peening. Online. Measurement. 2018, Vol. 127, no. OCT 2018, p. 453-462. ISSN 0263-2241. Available from: https://www.sciencedirect.com/science/article/pii/S0263224118305384?via%3Dihub.
Detail

HILŠER, Ondřej; RUSZ, Stanislav; SZKANDERA, Pavel; ČÍŽEK, Lubomír; KRAUS, Martin; DŽUGAN, Jan and MAZIARZ, Wojciech. Study of the Microstructure, Tensile Properties and Hardness of AZ61 Magnesium Alloy Subjected to Severe Plastic Deformation. Online. Metals. 2018, Vol. 8, no. 10, p. 1-16. ISSN 2075-4701. Available from: https://www.mdpi.com/2075-4701/8/10/776.
Detail

DUTKIEWICZ, Jan; BOBROWSKI, Piotr; RUSZ, Stanislav; HILŠER, Ondřej; TANSKI, Tomasz A.; BOREK, Wojciech; LAGODA, Marek; OSTACHOWSKI, Pawel; PALKA, Pawel; BOCZKAL, Grzegorz; KUC, Dariusz and MIKUSZEWSKI, Tomasz. Effect of Various SPD Techniques on Structure and Superplastic Deformation of Two Phase MgLiAl Alloy. Online. Metals and Materials International. 2018, Vol. 24, no. 5, p. 1077-1089. ISSN 1598-9623. Available from: https://link.springer.com/article/10.1007/s12540-018-0118-3.
Detail

RUSZ, Stanislav; HILŠER, Ondřej; TYLŠAR, Stanislav; ČÍŽEK, Lubomír; TAŃSKI, Tomasz and MAZIARZ, Wojciech. The influence of severe plastic deformation process on structure and properties of AZ 31 alloy after selected heat treatment. Solid State Phenomena. Volume 258. 2018, Vol. 275, no. 1, p. 134-146. ISSN 1012-0394.
Detail

PFEIFER, Marcel Rolf. Rapid Prototyping Technologies for Manufacturing and Maintenance Activities. Technologické inžinierstvo. 2018, Vol. 14, no. 2/2017, p. 30-32. ISSN 1336-5967.
Detail

MALOTOVÁ, Šárka; ČEP, Robert; ZLÁMAL, Tomáš; MOHYLA, Petr; CZÁN, Andrej; ANTIC, Aco; BUDAK, Igor and MIRCEA, Lobontiu. Evaluation of Residual Stresses after Irregular Interrupted Machining. Online. Tehnički vjesnik – Technical Gazette. 2018, Vol. 25, no. 4, p. 1009-1013. ISSN 1330-3651. Available from: https://hrcak.srce.hr/204446.
Detail

HLAVATÝ, Ivo; HÁJKOVÁ, Petra; KREJČÍ, Lucie and ČEP, Robert. Electric Resistance Welding of Austenitic and Galva nized Steel Sheets. Tehnički vjesnik – Technical Gazette. 2018, Vol. 25, no. 5, p. 1274-1277. ISSN 1330-3651.
Detail

LEHOCKA, Dominika; KLICH, Jiří; BOTKO, František; FOLDYNA, Josef; HLOCH, Sergej; KEPIC, Jan; KOVAL', K; KREJČÍ, Lucie and ŠTORKÁN, Zdeněk. Pulsating water jet erosion effect on a brass flat solid surface. Online. The international journal of advanced manufacturing technology. 2018, Vol. 97, no. 1-4, p. 1099-1112. ISSN 0268-3768. Available from: https://link.springer.com/article/10.1007%2Fs00170-018-1882-4.
Detail

VONTOROVÁ, Jiřina and MOHYLA, Petr. Use of GDOES method for evaluation of the quality and thickness of hot dip galvanised coating. Transactions of the Institute of Metal Finishing. 2018, Vol. 96, no. 6, p. 313-318. ISSN 0020-2967.
Detail

DUTKIEWICZ, J.M.; RUSZ, Stanislav; KUC, D.; HILŠER, Ondřej; PAŁKA, P. and BOCZKAL, G.. Superplastic deformation of two phase MgLiAl alloy after TCAP pressing. Acta Metallurgica Slovaca. 2017, Vol. 23, no. 3, p. 215-221. ISSN 1335-1532.
Detail

HILŠER, Ondřej; RUSZ, Stanislav; MAZIARZ, W; DUTKIEWICZ, J.; TAŃSKI, T.; SNOPIŃSKI, P. and DŽUGAN, J. Structure and properties of AZ31 magnesium alloy after combination of hot extrusion and ECAP. Acta Metallurgica Slovaca. 2017, Vol. 23, no. 3, p. 222-228. ISSN 1335-1532.
Detail

DUTKIEWICZ, Jan; RUSZ, Stanislav; MAZIARZ, Wojciech; SKUZA, Wojciech; KUC, Dariusz and HILŠER, Ondřej. Modification of Microstructure and Properties of Extruded Mg–Li–Al Alloys of α and α β Phase Composition using ECAP Processing. Acta Physica Polonica A. 2017, Vol. 131, no. 5, p. 1303-1306. ISSN 0587-4246.
Detail

SCHINDLEROVÁ, Vladimíra and ŠAJDLEROVÁ, Ivana. INFLUENCE TOOL WEAR IN MATERIAL FLOW. Advances in science and technology-research journal. 2017, Vol. 11, no. 1, p. 161-165. ISSN 2299-8624.
Detail

SNOPIŃSKI, Przemysław; TAŃSKI, Tomasz; HILŠER, Ondřej and LUBOS, Adam. Effect of ECAP process on structure and hardness of AlMg3 aluminium alloy. Archives of Materials Science and Engineering. 2017, Vol. 84, no. 2, p. 79-85. ISSN 1897-2764.
Detail

ČÍŽEK, Lubomír; RUSZ, Stanislav; HILŠER, Ondřej; SLIWA, Romana Ewa; KUC, Dariusz; TAŃSKI, Tomasz and MAREK, Tkocz. Microstructure and properties of selected magnesium-aluminum alloys prepared for spd processing technology. Archives of Metallurgy and Materials. 2017, Vol. 62, no. 4, p. 2365-2370. ISSN 1733-3490.
Detail

VONTOROVÁ, Jiřina; DOBIAS, Vaclav and MOHYLA, Petr. Utilization of GDOES for the study of friction layers formed on the surface of brake discs during the friction process. Chemical Papers. 2017, Vol. 71, no. 8, p. 1507-1514. ISSN 0366-6352.
Detail

KONAR, R.; MICIAN, M.; BUCHA, Michael; VRZGULA, P. and HLAVATÝ, Ivo. Digital radiography corrosion mapping on gas pipelines. Online. Communications. 2017, Vol. 19, no. 2, p. 101-105. ISSN 1335-4205. Available from: https://www.scopus.com/search/form.uri?display=basic&zone=header&origin=recordpage.
Detail

RUSZ, Stanislav; SALAJKA, Michal; DŽUGAN, Jan; HILŠER, Ondřej; BOŘUTA, Josef; PASTRŇÁK, Martin and ŠVEC, Jiří. Development of geometry of forming tools for extrusion of strip sheet by SPD process. IOP Conference Series: Materials Science and Engineering. Volume 179. 2017, Vol. 179, no. 1, p. 1-11. ISSN 1757-8981.
Detail

HILŠER, Ondřej; RUSZ, Stanislav; TAŃSKI, Tomasz; SNOPIŃSKI, Przemysław; DŽUGAN, Jan and KRAUS, Martin. Mechanical properties and structure of AZ61 magnesium alloy processed by equal channel angular pressing. IOP Conference Series: Materials Science and Engineering. Volume 179. 2017, Vol. 179, no. 1, p. 1-7. ISSN 1757-8981.
Detail

MOHYLA, Petr; HLAVATÝ, Ivo; HRUBÝ, Jiří and KREJČÍ, Lucie. Investigation of Heat Affected Zone of Steel P92 Using the Thermal Cycle Simulator. International Journal of Materials and Metallurgical Engineering. Volume 11. 2017, Vol. 6, no. 11, p. 460-463. ISSN 1307-6892.
Detail

ČADA, Radek; FRYDRÝŠEK, Karel; SEJDA, František; DEMEL, Jiří and PLEVA, Leopold. Analysis of Locking Self-Taping Bone Screws for Angularly Stable Plates. Journal of Medical and Biological Engineering. 2017, Vol. 37, no. 4, p. 612-625. ISSN 1609-0985.
Detail

BOHÁČIK, Michal; MIČIAN, Miloš; KOŇÁR, Radoslav and HLAVATÝ, Ivo. Ultrasonic testing of butt weld joint by TOFD technique. Manufacturing Technology. 2017, Vol. 17, no. 6, p. 842-847. ISSN 1213-2489.
Detail

HILŠER, Ondřej; RUSZ, Stanislav; MAZIARZ, Wojciech; CHULIST, Robert; DUTKIEWICZ, Jan; ČÍŽEK, Lubomír; KRAUS, Martin and TAŃSKI, Tomasz. Grain refinement of AZ61 alloy after ECAP processing. Materials science forum. Volume 891. 2017, Vol. 891, no. 1, p. 372-376. ISSN 0255-5476.
Detail

TAŃSKI, Tomasz; SNOPIŃSKI, Przemysław and HILŠER, Ondřej. Microstructure and mechanical properties of two binary Al-Mg alloys deformed using equal channel angular pressing. Materialwissenschaft und Werkstofftechnik. 2017, Vol. 48, no. 5, p. 439-446. ISSN 0933-5137.
Detail

MOHYLA, Petr; HAVELKA, Lukáš; SCHMIDOVÁ, Eva and VONTOROVÁ, Jiřina. Mechanical Properties of Steel P92 Welded Joints Obtained By TIG Technology. Metal Science and Heat Treatment. 2017, Vol. 59, no. 7-8, p. 540-542. ISSN 0026-0673.
Detail

HLAVATÝ, Ivo; KOZÁK, Jindřich; KREJČÍ, Lucie; SAMARDZIC, Ivan and TUOMINEN, Jari. THE EFFECT OF TUNGSTEN CARBIDE PARTICLES CONTENT IN A WELD DEPOSIT ON ITS ABRASION RESISTANCE. Tehnički vjesnik – Technical Gazette. 2017, Vol. 24, no. 5, p. 1345-1349. ISSN 1330-3651.
Detail

MICIETOVA, Anna; NESLUSAN, Miroslav; ČEP, Robert; OCHODEK, Vladislav; MICIETA, Branislav and PAGÁČ, Marek. DETECTION OF GRINDING BURN THROUGH THE HIGH AND LOW FREQUENCY BARKHAUSEN NOISE. Tehnički vjesnik – Technical Gazette. 2017, Vol. 24, no. Supplement 1, p. 71-77. ISSN 1330-3651.
Detail

HILŠER, Ondřej; RUSZ, Stanislav; KREJČÍ, Lucie and ŠPALEK, František. Grain refinement of extruded AZ31 magnesium alloy by ECAP process. Transactions of the VŠB - Technical University of Ostrava, Mechanical Series. 2017, Vol. 63, no. 1, p. 31-37. ISSN 1210-0471.
Detail

ŠVEC, Jiří; RUSZ, Stanislav; HILŠER, Ondřej; OCHODEK, Vladislav and KREJČÍ, Lucie. Mechanical properties of steel DC01 formed by DRECE method. Transactions of the VŠB - Technical University of Ostrava, Mechanical Series. 2017, Vol. 63, no. 1, p. 63-72. ISSN 1210-0471.
Detail

VALÍČEK, Jan; HARNIČÁROVÁ, Marta; PANDA, A; HLAVATÝ, Ivo; KUŠNEROVÁ, Milena; TOZAN, Hakan; YAGIMLI, Mustafa and VÁCLAVÍK, Vojtěch. Mechanism of creating the topography of an abrasive water jet cut surface. Advanced Structured Materials. Volume 61. 2016, Vol. 61, no. 1, p. 111-120. ISSN 1869-8433.
Detail

TAŃSKI, Tomasz; SNOPIŃSKI, Przemyslaw; PAKIEŁA, Wojciech; BOREK, Wojciech; PRUSIK, Krystian and RUSZ, Stanislav. Structure and properties of AlMg alloy after combination of ECAP and post-ECAP ageing. Archives of Civil and Mechanical Engineering. 2016, Vol. 16, no. 3, p. 325-334. ISSN 1644-9665.
Detail

SNOPINSKI, Przemyslaw; TANSKI, Tomasz; LABISZ, Krzysztof; RUSZ, Stanislav; JONŠTA, Petr and KROL, Mariusz. Wrought aluminium-magnesium alloys subjected to SPD processing. International journal of materials research. 2016, Vol. 107, no. 7, p. 637-645. ISSN 1862-5282.
Detail

VALÍČEK, Jan; HARNIČÁROVÁ, Marta; HLAVATÝ, Ivo; GRZNÁRIK, Radovan; KUŠNEROVÁ, Milena; HUTYROVÁ, Zuzana and PANDA, Anton. A new approach for the determination of technological parameters for hydroabrasive cutting of materials. Materialwissenschaft und Werkstofftechnik. 2016, Vol. 47, no. 5-6, p. 462-471. ISSN 0933-5137.
Detail

SCHINDLEROVÁ, Vladimíra; ŠAJDLEROVÁ, Ivana and ZMEŠKAL, Pavel. Implementation of the Principles of TPM in Field of Maintenance Preparations. Sborník vědeckých prací Vysoké školy báňské-Technické univerzity Ostrava, Řada strojní. 2016, Vol. LXII, no. 1, p. 51-57. ISSN 1210-0471.
Detail

SCHMIDOVA, Eva; HLAVATÝ, Ivo and HANUS, Petr. THE WELDABILITY OF THE STEEL WITH HIGH MANGANESE. Tehnički vjesnik – Technical Gazette. 2016, Vol. 23, no. 3, p. 749-752. ISSN 1330-3651.
Detail

LEHOCKA, Dominika; HLAVATÝ, Ivo and HLOCH, Sergej. RATIONALIZATION OF MATERIAL FLOW IN PRODUCTION OF SEMITRAILER FRAME FOR AUTOMOTIVE INDUSTRY. Tehnički vjesnik – Technical Gazette. 2016, Vol. 4, no. 23, p. 1215-1220. ISSN 1330-3651.
Detail

HILŠER, Ondřej; RUSZ, Stanislav; ČADA, Radek; SALAJKA, Michal and DUTKIEWICZ, Jan. Influence of Severe Plastic Deformation on Mechanical Properties and Structure of Aluminium Alloys. Transactions of the VŠB - Technical University of Ostrava, Mechanical Series. 2016, Vol. 62, no. 1, p. 25-37. ISSN 1210-0471.
Detail

RUSZ, Stanislav; ČÍŽEK, Lubomír; MICHENKA, Vít; DUTKIEWICZ, Jan; SALAJKA, Michal; HILŠER, Ondřej; TYLŠAR, Stanislav; KEDROŇ, Jan and KLOS, Marcel. New Type of Device for Achievement of Grain Refinement in Metal Strip. Advanced Materials Research. 2015, Vol. 1127, p. 91-97. ISSN 1662-8985.
Detail

SONDEL, Martin; KOUKAL, Jaroslav; SCHWARZ, David and SCHWARZ, Drahomír. Evaluation of Secondary Hardening and Microstructure in the Real T24 Steel Weld Joint. Advanced materials research. Volume 1111. 2015, Vol. 1111, no. 2015, p. 151-156. ISSN 1022-6680.
Detail

HILŠER, Ondřej; RUSZ, Stanislav; SALAJKA, Michal and ČÍŽEK, Lubomír. Evaluation of the deep-drawing steel sheets processed by DRECE device. Archives of Materials Science and Engineering. 2015, Vol. 68, no. 1, p. 31-35. ISSN 1897-2764.
Detail

RUSZ, Stanislav; KŁYSZEWSKI, Andrzej; SALAJKA, Michal; HILŠER, Ondřej; ČÍŽEK, Lubomír and KLOS, Marcel. Possibilities of Application Methods Drece in Forming of Non-Ferrous Metals. Archives of Metallurgy and Materials. 2015, Vol. 60, no. 4, p. 3011-3016. ISSN 1733-3490.
Detail

GREGUŠOVÁ, Markéta; SCHINDLEROVÁ, Vladimíra; ŠAJDLEROVÁ, Ivana; MOHYLA, Petr and KEDROŇ, Jan. Practical Apllication of Simulation of Business Processes. International Journal of Social, Education, Economics and Management Engineering. 2015, Vol. 9, no. 2, p. 424-429. ISSN 1307-6892.
Detail

LESŇÁK, Michal; STANĚK, František; HLAVATÝ, Ivo; PIŠTORA, Jaromír and PROCHÁZKA, Jan. SPR Method and Its Utilisation for Low Alcohols Concentrations Determination. Journal of Modern Physics. 2015, Vol. 6, no. 4, p. 363-368. ISSN 2153-120X.
Detail

HRUBÝ, Jiří; SCHINDLEROVÁ, Vladimíra and RENTKA, Josef. Degradation Processes in the Contact Layers of Forming Tools. Manufacturing Technology. 2015, Vol. 15, no. 5, p. 836-842. ISSN 1213-2489.
Detail

TAŃSKI, Tomasz; KRÓL, Mariusz; SNOPIŃSKI, Przemysław; ROSZAK, Marek; RUSZ, Stanislav and PALČEK, Peter. Thermal and structure analysis of the aluminium ENAC-AlMg5Si2Mn alloy. Materials Engineering. 2015, Vol. 22, no. 4, p. 54-66. ISSN 1335-0803.
Detail

MARŠÁL, Robert; PODJUKLOVÁ, Jitka; SIOSTRZONEK, René; PAVELKOVÁ, Daniela; KOLDOVÁ, Lenka and PĚNIČKA, Zdeněk. CORROSION OF DRY - BOTTOM BOILER EVAPORATOR IN POWER INDUSTRY. Materials Science Forum. 2015, Vol. 818, no. May 2015, p. 129-132. ISSN 1662-9752.
Detail

SIOSTRZONEK, René; PAVELKOVÁ, Daniela; KOLDOVÁ, Lenka; PODJUKLOVÁ, Jitka and STRZYŽ, Petr. CORROSION PROTECTION OF STRUCTURAL STEELWORK BY A DUPLEX COATING SYSTEM. Materials Science Forum. 2015, Vol. 818, no. May 2015, p. 162-166. ISSN 1662-9752.
Detail

HANÁK, Miroslav; PODJUKLOVÁ, Jitka; SIOSTRZONEK, René; PAVELKOVÁ, Daniela and KOLDOVÁ, Lenka. THE INFLUENCE OF SUBSTRATE SURFACE CLEANLINESS ON THE CORROSION RESISTANCE OF COATING SYSTEMS. Materials Science Forum. 2015, Vol. 818, no. May 2015, p. 167-170. ISSN 1662-9752.
Detail

PAVELKOVÁ, Daniela; KOLDOVÁ, Lenka; PODJUKLOVÁ, Jitka; SIOSTRZONEK, René; PĚNIČKA, Zdeněk and MENSHIKOV, Vladimír. SHORT-TERM CORROSION PROTECTION MATERIALS USING NANOCOATINGS. Materials Science Forum. 2015, Vol. 818, no. May 2015, p. 89-92. ISSN 1662-9752.
Detail

LAJCZYKOVÁ, Markéta; KOUKAL, Jaroslav and SONDEL, Martin. Zákonné povinnosti, kvalifikační a technické požadavky na výrobce stavebních konstrukcí podle EN 1090-1 A1. Svět svaru. 2015, Vol. 3, no. 2015, p. 21-28. ISSN 1214-4983.
Detail

HLAVATÝ, Ivo; KOZÁK, Jindřich; KREJČÍ, Lucie and SAMARDŽIĆ, Ivan. The Effect of Tungsten Carbide Participles Content in Weld Deposit on its Abrasion Resistance. Tehnički vjesnik – Technical Gazette. 2015, Vol. 23, no. 03/2016, p. 25-31. ISSN 1330-3651.
Detail

BOREK, Wojciech; CZAJA, Małgorzata; LABISZ, Krzyszfof Marek; TAŃSKI, Tomasz; KRUPIŃSKI, Mariusz and RUSZ, Stanislav. High manganese austenitic X6MnSiAlNbTi26-3-3 steel - characteristic, Structures and Properties. Advanced Materials Research. Volume 1036. 2014, Vol. 1036, p. 18-23. ISSN 1022-6680.
Detail

HLAVATÝ, Ivo. Technické vzdělání na Fakultě strojní VŠB - TU Ostrava versus praxe. All For Power. 2014, Vol. 8, no. 3, p. 74-76. ISSN 1802-8535.
Detail

TAŃSKI, Tomasz; DOBRZAŃSKI, Leszek; RUSZ, Stanislav; MATYSIAK, Wojciech and KRAUS, Martin. Characteristic features of fine-grained coatings deposited on magnesium alloys. Archives of Materials Science and Engineering. 2014, Vol. 66, no. 1, p. 13-20. ISSN 1897-2764.
Detail

OCHODEK, Vladislav and BOXAN, Pavel. Weldability of carbon steel processed by multiple plastic deformation. Archives of Materials Science and Engineering. 2014, Vol. 69, no. 2, p. 88-93. ISSN 1897-2764.
Detail

RUSZ, Stanislav; SALAJKA, Michal; ČÍŽEK, Lubomír; TYLŠAR, Stanislav; KEDROŇ, Jan; MICHENKA, Vít; DONIČ, Tibor; HADASIK, Eugenius and KLOS, Marcel. Ultrafine grain refinement of AlMn1Cu and AZ31 alloys by SPD process. Archives of Metallurgy and Materials. 2014, Vol. 59, no. 1, p. 359-364. ISSN 1733-3490.
Detail

VONTOROVÁ, Jiřina and MOHYLA, Petr. Studium zinkové vrstvy na plechu po tepelném ovlivnění pájením. Hutnické listy. 2014, Vol. 67, no. 6, p. 67-72. ISSN 0018-8069.
Detail

ČEP, Robert; JANÁSEK, Adam; PETRŮ, Jana; SADÍLEK, Marek; MOHYLA, Petr; VALÍČEK, Jan; HARNIČÁROVÁ, Marta and CZAN, Andrej. Surface roughness after machining and influence of feed rate on process. Key engineering materials. Volume 581. 2014, Vol. 581, no. 1, p. 341-347. ISSN 1013-9826.
Detail

KONAR, Radoslav; MIČIAN, Miloš and HLAVATÝ, Ivo. Defect detection in pipelines during operation using magnetic flux leakage and phased array ultrasonic method. Manufacturing Technology. 2014, Vol. 14, no. 3, p. 337-341. ISSN 1213-2489.
Detail

MOHYLA, Petr; KUBOŇ, Zdeněk; ČEP, Robert and SAMARDZIC, Ivan. Evaluation of Creep Properties of Steel P92 and its Welded Joint. Metalurgija. 2014, Vol. 53, no. 2, p. 175-178. ISSN 0543-5846.
Detail

MOHYLA, Petr; KUBOŇ, Zdeněk; ČEP, Robert; JANÁSEK, Adam and SAMARDZIC, Ivan. Secondary Hardening of Low-Alloyed Creep-Resistant Steel Welds. Metalurgija. 2014, Vol. 53, no. 1, p. 25-28. ISSN 0543-5846.
Detail

HLOCH, Sergej; HLAVÁČEK, Jiří; VASILKO, Karol; CARÁCH, Ján; SAMARDŽĆ, Ivan; KOZAK, Dražan; HLAVATÝ, Ivo; ŠČUČKA, Jiří; KLICH, Jiří and KLICHOVÁ, Dagmar. Abrasive WaterJet (AWJ) Titanium Tangential Turning Evaluation. Metalurgija. 2014, Vol. 53, no. 4, p. 537-540. ISSN 0543-5846.
Detail

RUSZ, Stanislav; ČÍŽEK, Lubomír; DUTKIEWICZ, Jan; TYLŠAR, Stanislav; SALAJKA, Michal; DIVIN, Václav; KEDROŇ, Jan and KLOS, Marcel. Rozdrobnienie ziarna stopu AlMn1Cu przez duże odkształcenie plastyczne (SPD). Obrobka Plastyczna Metali. 2014, Vol. 25, no. 2, p. 1-12. ISSN 0867-2628.
Detail

GU, Chengfan; TOTH, Laszlo; RUSZ, Stanislav and BOVA, Miroslav. Texture induced grain coarsening in severe plastic deformed low carbon steel. Scripta materialia. 2014, Vol. 86, no. 1, p. 36-39. ISSN 1359-6462.
Detail

SCHWARZ, Drahomír and HLAVATÝ, Ivo. Svařování plazmovým obloukem. Svět svaru. 2014, Vol. 1, no. 1/2014, p. 7-11. ISSN 1214-4983.
Detail

HLAVATÝ, Ivo. Řezání plazmou. Svět svaru. 2014, Vol. 1, no. 1, p. 8-9. ISSN 1214-4983.
Detail

ČADA, Radek and TILLER, Petr. Evaluation of draw beads influence on intricate shape stamping drawing process. Technologické inžinierstvo. 2014, Vol. 9, no. 1, p. 5-10. ISSN 1336-5967.
Detail

MOHYLA, Petr and STERNADELOVÁ, Kristýna. Vlastnosti svarových spojů oceli 10CrWMoVNb9-2 v závislosti na režimu tepelného zpracování po svaření. All For Power. 2013, no. 5, p. 140-144. ISSN 1802-8535.
Detail

ČÍŽEK, Lubomír; RUSZ, Stanislav; SALAJKA, Michal; LEGERSKI, Miroslav; TANSKI, Thomas and HADASIK, Eugenius. The mathematical model of the mean flow stress for MgAl3Zn1Mn magnesium alloy. Archives of Materials Science and Engineering. 2013, Vol. 61, no. 1, p. 5-12. ISSN 1897-2764.
Detail

KEDROŇ, Jan; ŽUROVEC, Marek and TYLŠAR, Stanislav. Využití programu Simufact.Forming pro optimalizaci procesu zápustkového kování. Kovárenství. 2013, Vol. 47, no. květen, p. 110-113. ISSN 1213-9289.
Detail

HRUBÝ, Jiří; RENTKA, Josef; SCHINDLEROVÁ, Vladimíra; KREJČÍ, Lucie and ŠEVČÍKOVÁ, Xenie. Possibilities of prediction of service life of forming tools. Manufacturing Technology. 2013, Vol. 12, no. 14, p. 178-181. ISSN 1213-2489.
Detail

MUSZTYFAGA, Malgorzata; DOBRZANSKI, Leszek; RUSZ, Stanislav; PROKOP, Lukáš and MIŠÁK, Stanislav. Application of modern technique to set the parameters of the monocrystalline solar cell and its structure. Przeglad elektrotechniczny. 2013, Vol. 89, no. 11, p. 24-26. ISSN 0033-2097.
Detail

RUSZ, Stanislav; KEDROŇ, Jan; TYLŠAR, Stanislav; SALAJKA, Michal and BRUMAR, Tomáš. Use of numerical simulations at optimization of technological processes of cold bulk forming. Sborník vědeckých prací Vysoké školy báňské - Technické univerzity Ostrava. Řada strojní. 2013, Vol. LVIII, no. 1, p. 175-181. ISSN 1210-0471.
Detail

SCHINDLEROVÁ, Vladimíra. The use of ergonomics to streamline processes. Technologické inžinierstvo. 2013, Vol. 10, no. 1/2013, p. 27-29. ISSN 1336-5967.
Detail

ČEP, Robert; JANÁSEK, Adam; ČEPOVÁ, Lenka; PETRŮ, Jana; HLAVATÝ, Ivo; CAR, Zlatan and HATALA, Michal. EXPERIMENTAL TESTING OF EXCHANGEABLE CUTTING INSERTS CUTTING ABILITY. Tehnički vjesnik – Technical Gazette. 2013, Vol. 20, no. 1, p. 21-26. ISSN 1330-3651.
Detail

ČADA, Radek and ZLÁMALÍK, Jan. Project of economically profitable technological process of production of rotor and stator plates of inductive position sensor by blanking and with the use of bending rolls. Transactions of the VŠB - Technical University of Ostrava, Mechanical Series. 2013, Vol. 59, no. 2, p. 27-38. ISSN 1210-0471.
Detail