ZLÁMAL, Tomáš; MRKVICA, Ivan; SZOTKOWSKI, Tomáš and MALOTOVÁ, Šárka. The Influence of Surface Treatment of PVD Coating on Its Quality and Wear Resistant. Online.
Coatings. 2019, Vol. 9, no. 7. ISSN 2079-6412. Available from:
https://www.mdpi.com/2079-6412/9/7/439.
Detail NAG, Akash; HLOCH, Sergej; ČUHA, Dominik; DIXIT, Amit Rai; PETRŮ, Jana; TOZAN, Hakan; HROMASOVA, Monika and MUELLER, Miroslav. Acoustic chamber length performance analysis in ultrasonic pulsating water jet erosion of ductile material. Online.
Journal of Manufacturing Processes. 2019, Vol. 47, no. 11/2019, p. 347-356. ISSN 1526-6125. Available from:
https://www.scopus.com/record/display.uri?eid=2-s2.0-85073325326&origin=resultslist&sort=plf-f&src=s&sid=8a37d8f06d74704ef94e9d8efff62dfa&sot=autdocs&sdt=autdocs&sl=18&s=AU-ID%2855354124200%29&relpos=0&citeCnt=0&searchTerm=.
Detail CARACH, Jan; HLOCH, Sergej; PETRŮ, Jana; MUELLER, Miroslav; HROMASOVA, Monika; NAG, Akash; CUHA, Dominik; HLAVACEK, Petr; HATALA, Michal; KRATOCHVÍL, Jiří and RUGGIERO, Alessandro. Evaluation of physical phenomena and surface integrity during hydroabrasive disintegration of the rotating workpiece with feedback loop control. Online.
Measurement. 2019, Vol. 134, no. February 2019, p. 586-594. ISSN 0263-2241. Available from:
https://apps.webofknowledge.com/InboundService.do?customersID=RRC&mode=FullRecord&IsProductCode=Yes&product=WOS&Init=Yes&Func=Frame&DestFail=http%3A%2F%2Fwww.webofknowledge.com&action=retrieve&SrcApp=RRC&SrcAuth=RRC&SID=C3il7DNxbWXHHMCAIzD&UT=WOS%3A000468223900053.
Detail KOZÁK, Jindřich; KREJČÍ, Lucie; HLAVATÝ, Ivo; SAMARDŽIČ, Ivan and ČEP, Robert. AN ANALYSIS OF STRUCTURES OCCURRING IN WELD DEPOSIT OF STEEL S235JR N WITH TUNGSTEN CARBIDE PARTICLES AND MARTENSITIC MATRIX. Online.
Metalurgija. 2019, Vol. 58, no. 3-4, p. 235-238. ISSN 0543-5846. Available from:
https://hrcak.srce.hr/index.php?show=clanak&id_clanak_jezik=318824.
Detail MALOTOVÁ, Šárka; ČEP, Robert; ZLÁMAL, Tomáš; MOHYLA, Petr; CZAN, Andrej; ANTIC, Aco; BUDAK, Igor and MIRCEA, Lobontiu. Evaluation of Residual Stresses after Irregular Interrupted Machining. Online.
Tehnički vjesnik – Technical Gazette. 2019, Vol. 25, no. 4, p. 1009-1013. ISSN 1330-3651. Available from:
http://hhttps://www.researchgate.net/publication/327385283_Evaluation_of_Residual_Stresses_after_Irregular_Interrupted_Machi.
Detail ČEP, Robert; MALOTOVÁ, Šárka; LICHOVNÍK, Jiří; HATALA, Michal and STANISLAW, Legutko. The influence of cutting conditions on the selected parameters of the surface integrity.
Acta Polytechnica. 2018, Vol. 58, no. 6, p. 334-338. ISSN 1210-2709.
Detail MICHALSKI, Jakub; TILL, Jakub; PETRŮ, Jana; RUSZ, Stanislav; HILŠER, Ondřej and VONTOROVÁ, Jiřina. AZ31 magnesium alloy subjected to severe plastic deformation at different temperatures: Microstructure and hardness.
IOP Conference Series: Materials Science and Engineering. Volume 385. 2018, Vol. 461, no. 1, p. 1-6. ISSN 1757-8981.
Detail MRKVICA, Ivan; PANDA, Anton; NOVÁKOVÁ-MARCINČINOVÁ, Ema; NOVÁKOVÁ-MARCINČINOVÁ, Ludmila and ZABOROWSKI, Tadeusz. PRODUCTION BY FDM METHOD RP TECHNOLOGY FROM PLA ECO-MATERIALS EXTRUDED HORIZONTALLY IN LENGTH.
MM Science Journal. 2018, Vol. 11, no. 1, p. 2179-2182. ISSN 1803-1269.
Detail MUSIL, Václav; SADÍLEK, Marek; ČEP, Robert and MALOTOVÁ, Šárka. The influence of cutting parameters on surface quality and nitrogen consumption during laser cutting.
MM Science Journal. 2018, Vol. 1, no. June 2018, p. 2363-2366. ISSN 1803-1269.
Detail ČEP, Robert; MALOTOVÁ, Šárka; KOUŘIL, Karel; ČEPOVÁ, Lenka; KYNCL, Ladislav; ŠAJGALÍK, Michal and CZÁNOVÁ, Tatiana. Evaluation of residual stress in conditions of irregular interrupted cut.
MM Science Journal. 2018, Vol. 2018, no. October, p. 2436-2440. ISSN 1803-1269.
Detail SADÍLEK, Marek; KOUSAL, Lukáš; NÁPRSTKOVÁ, N.; SZOTKOWSKI, Tomáš and HAJNYŠ, Jiří. The analysis of accuracy of machined surfaces and surfaces roughness after 3axis and 5axis milling.
Manufacturing Technology. 2018, Vol. 18, no. 6, p. 1015-1022. ISSN 1213-2489.
Detail BOTKO, F.; HATALA, M.; MITALOVA, Z.; ČEP, Robert; RIMAR, M.; BERNAT, A. and VYBOSTEK, J.. Qualitative evaluation of machined surface of aluminum alloy AlCu4Mg1 depend on feed rate.
Manufacturing Technology. 2018, Vol. 18, no. 2, p. 201-207. ISSN 1213-2489.
Detail MĚSÍČEK, Jakub; RICHTÁŘ, Michal; PETRŮ, Jana; PAGÁČ, Marek and KUTIOVÁ, Kristýna. Complex view to racing car upright design and manufacturing.
Manufacturing Technology. 2018, Vol. 18, no. 3, p. 449-456. ISSN 1213-2489.
Detail MALOTOVÁ, Šárka; ČEP, Robert; KRATOCHVÍL, Jiří; ŠAJGALÍK, Michal and CZÁN, Andrej. Dependence of the resistance of the integrated layers on the wear of ceramic cutting tool.
Manufacturing Technology. 2018, Vol. 2018, no. 3, p. 444-448. ISSN 1213-2489.
Detail MRKVICA, Ivan; ŠPALEK, František and SZOTKOWSKI, Tomáš. Influence of Cutting Tool Wear when Milling Inconel 718 on Resulting Roughness.
Manufacturing Technology. 2018, Vol. 18, no. 3, p. 547-461. ISSN 1213-2489.
Detail PAGÁČ, Marek; HAJNYŠ, Jiří; PETRŮ, Jana and ZLÁMAL, Tomáš. Comparison of hardness of surface 316L stainless steel made by additive technology and cold rolling.
Materials Science Forum. 2018, Vol. 919, no. 2017-11-07, p. 84-91. ISSN 1662-9752.
Detail MALOTOVÁ, Šárka; ČEP, Robert; ZLÁMAL, Tomáš; MOHYLA, Petr; CZÁN, Andrej; ANTIC, Aco; BUDAK, Igor and MIRCEA, Lobontiu. Evaluation of Residual Stresses after Irregular Interrupted Machining. Online.
Tehnički vjesnik – Technical Gazette. 2018, Vol. 25, no. 4, p. 1009-1013. ISSN 1330-3651. Available from:
https://hrcak.srce.hr/204446.
Detail HLAVATÝ, Ivo; HÁJKOVÁ, Petra; KREJČÍ, Lucie and ČEP, Robert. Electric Resistance Welding of Austenitic and Galva nized Steel Sheets.
Tehnički vjesnik – Technical Gazette. 2018, Vol. 25, no. 5, p. 1274-1277. ISSN 1330-3651.
Detail RUDAWSKA, Anna; WIERZCHOWSKI, Albert; MUELLER, Miroslav; PETRŮ, Jana and NAPRSTKOVA, Natasa. THE PROPERTIES OF REGENERATIVE POLYMER MASS.
Advances in science and technology-research journal. 2017, Vol. 11, no. 3, p. 130-138. ISSN 2299-8624.
Detail KRATOCHVÍL, Jiří; PETRŮ, Jana; PAGÁČ, Marek; HOLUBJAK, Jozef and MRAZIK, Jozef. EFFECT OF CHIP BREAKERS ON THE CUTTING FORCE DURING THE MACHINING OF STEEL C45.
Advances in science and technology-research journal. 2017, Vol. 11, no. 1, p. 173-178. ISSN 2299-8624.
Detail HAJNYŠ, Jiří; ZLÁMAL, Tomáš; PETRŮ, Jana; PAGÁČ, Marek and RUDAWSKA, Anna. IMPACT OF CUTTING TOOL GEOMETRY ON THE DYNAMIC LOAD OF SYSTEM IN THE MACHINING PROCESS OF NICKEL ALLOY 625.
Advances in science and technology-research journal. 2017, Vol. 10, no. 32, p. 24-31. ISSN 2299-8624.
Detail ZLÁMAL, Tomáš; HAJNYŠ, Jiří; PETRŮ, Jana and MRKVICA, Ivan. EFFECT OF THE CUTTING TOOL GEOMETRY ON THE TOOL WEAR RESISTANCE WHEN MACHINING INCONEL 625.
Advances in science and technology-research journal. 2017, Vol. 11, no. 4, p. 286-293. ISSN 2299-8624.
Detail ČEP, Robert; KYNCL, Ladislav; MALOTOVÁ, Šárka; PETRŮ, Jana; ZLÁMAL, Tomáš and CZÁN, Andrej. TESTING CERAMICS INSERTS AT IRREGULAR INTERRUPTED CUT ON MATERIAL 14MoV6.
Engineering Review. 2017, Vol. 37, no. 1, p. 67-73. ISSN 1330-9587.
Detail MRKVICA, Ivan; SZOTKOWSKI, Tomáš; JANOŠ, Miroslav; PETRŮ, Jana and ZLÁMAL, Tomáš. Square Shaped Insert´s Lifetime when Milling Inconel 718.
MM Science Journal. 2017, Vol. 10, no. 5, p. 1995-2003. ISSN 1803-1269.
Detail ŠPALEK, František; SADÍLEK, Marek; ČEP, Robert; PETRŮ, Jana; KRATOCHVÍL, Jiří and ČEGAN, Tomáš. Difference between cutting surface of Al foam and solid Al machined by WEDM technology.
Manufacturing Technology. 2017, Vol. 17, no. 5, p. 853-858. ISSN 1213-2489.
Detail MRKVICA, Ivan; SZOTKOWSKI, Tomáš; DIHEL, Kamil; JURKO, Jozef and PANDA, Anton. Jig design for welding of wind power plant component.
Manufacturing Technology. 2017, Vol. 17, no. 2, p. 237-242. ISSN 1213-2489.
Detail MRKVICA, Ivan; SZOTKOWSKI, Tomáš; TÝN, Zbyněk; PETRŮ, Jana and ZLÁMAL, Tomáš. Jig design for window frame welding of rail-borne door systems.
Manufacturing Technology. 2017, Vol. 17, no. 4, p. 526-530. ISSN 1213-2489.
Detail ŠPALEK, František; SADÍLEK, Marek; ČEP, Robert; PETRŮ, Jana; KRATOCHVÍL, Jiří and ČEGAN, Tomáš. Difference between Cutting Surface of Al Foam and Solid Al Machined by WEDM Technolo-gy.
Manufacturing Technology. 2017, Vol. 17, no. 5, p. 853-858. ISSN 1213-2489.
Detail HAŠOVÁ, Slavomíra; STRAKA, Luboslav and ŠPALEK, František. Impact assessment of input factors on tool electrode wear in die sinking EDM of Steel EN43CrMo4.
Materials Structure & Micromechanics of Fracture. 2017, Vol. 756, no. 1, p. 127-135. ISBN 978-3-03835-719-3.
Detail PETRŮ, Jana; ZLÁMAL, Tomáš; ČEP, Robert; SADÍLEK, Marek and STANCEKOVA, Dana. THE EFFECT OF FEED RATE ON DURABILITY AND WEAR OF EXCHANGEABLE CUTTING INSERTS DURING CUTTING Ni-625.
Tehnički vjesnik – Technical Gazette. 2017, Vol. 24, no. Supplement 1, p. 1-6. ISSN 1330-3651.
Detail MICIETOVA, Anna; NESLUSAN, Miroslav; ČEP, Robert; OCHODEK, Vladislav; MICIETA, Branislav and PAGÁČ, Marek. DETECTION OF GRINDING BURN THROUGH THE HIGH AND LOW FREQUENCY BARKHAUSEN NOISE.
Tehnički vjesnik – Technical Gazette. 2017, Vol. 24, no. Supplement 1, p. 71-77. ISSN 1330-3651.
Detail HILŠER, Ondřej; RUSZ, Stanislav; KREJČÍ, Lucie and ŠPALEK, František. Grain refinement of extruded AZ31 magnesium alloy by ECAP process.
Transactions of the VŠB - Technical University of Ostrava, Mechanical Series. 2017, Vol. 63, no. 1, p. 31-37. ISSN 1210-0471.
Detail ŠVEC, Jiří; RUSZ, Stanislav; HILŠER, Ondřej; OCHODEK, Vladislav and KREJČÍ, Lucie. Mechanical properties of steel DC01 formed by DRECE method.
Transactions of the VŠB - Technical University of Ostrava, Mechanical Series. 2017, Vol. 63, no. 1, p. 63-72. ISSN 1210-0471.
Detail ZLÁMAL, Tomáš; PETRŮ, Jana; VORTEL, Ondřej; PAGÁČ, Marek and KRAJKOVIČ, Pavel. MECHANISMS OF CUTTING BLADE WEAR AND THEIR INFLUENCE ON CUTTING ABILITY OF THE TOOL DURING MACHINING SPECIAL ALLOYS.
ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL. 2016, Vol. 10, no. 31, p. 144-150. ISSN 2299-8624.
Detail HAJNYŠ, Jiří; ZLÁMAL, Tomáš; PETRŮ, Jana; PAGÁČ, Marek and RUDAWSKA, Anna. IMPACT OF CUTTING TOOL GEOMETRY ON THE DYNAMIC LOAD OF SYSTEM IN THE MACHINING PROCESS OF NICKEL ALLOY 625.
Advances in science and technology-research journal. 2016, Vol. 10, no. 32, p. 24-31. ISSN 2299-8624.
Detail MATYSIAK, W.; BARTKOWSKI, D.; HATALA, M.; ZAJAC, J.; RADCHENKO, S. and ČEP, Robert. Study on edgetrimming of holes in the thick steel plates by metal plastic forming technology.
Key Engineering Materials. Volume 669. 2016, Vol. 669, no. 669, p. 87-94. ISSN 1013-9826.
Detail MRKVICA, Ivan; SLÉHA, Vojtěch; PETRŮ, Jana; NESLUSAN, M.; JURKO, J. and PANDA, A.. Design of control jig for inserts measurement.
Manufacturing Technology. 2016, Vol. 16, no. 1, p. 198-204. ISSN 1213-2489.
Detail TICHÁ, Šárka; SRBA, Ondřej and VAVŘINA, Jan. A measuring device for the checking of 3D indicators.
Manufacturing Technology. 2016, Vol. 16, no. 1, p. 280-284. ISSN 1213-2489.
Detail ČEPOVÁ, Lenka; ŠOKOVÁ, Dagmar; MALOTOVÁ, Šárka; GAPINSKI, Bartosz and ČEP, Robert. Evaluation of cutting forces and surface roughness after machining of selected materials.
Manufacturing Technology. 2016, Vol. 16, no. 1, p. 45-48. ISSN 1213-2489.
Detail PANDA, A.; PRISLUPČÁK, M.; JURKO, J.; PANDOVÁ, I.; MRKVICA, Ivan and LUSCINSKI, S.. The impact of vibration on the technological head.
Manufacturing Technology. 2016, Vol. 16, no. 3, p. 579-585. ISSN 1213-2489.
Detail MALOTOVÁ, Šárka; ČEP, Robert; ČEPOVÁ, Lenka; PETRŮ, Jana; STANČEKOVÁ, Dana; KYNCL, Ladislav and HATALA, Michal. Roughness Evaluation of the Machined Surface at Interrupted Cutting Process.
Manufacturing Technology. 2016, Vol. 16, no. 1, p. 168-173. ISSN 1213-2489.
Detail ŠPALEK, František; PETRŮ, Jana; ZLÁMAL, Tomáš; MRKVICA, Ivan; ČEP, Robert and KRATOCHVÍL, Jiří. Electro-Erosive Wire Cutting of Aluminum Foam.
Manufacturing Technology. 2016, Vol. 16, no. 2, p. 449-453. ISSN 1213-2489.
Detail DUBOVSKÁ, Rosemarina; MAJERÍK, Jozef; ČEP, Robert and KOUŘIL, Karel. INVESTIGATING THE INFLUENCE OF CUTTING SPEED ON THE TOOL LIFE OF CUTTING INSERT IN CUTTING THE DIN 1.4301 STEEL.
Materiali in tehnologije. 2016, Vol. 50, no. 3, p. 439-445. ISSN 1580-2949.
Detail STANCEKOVA, D.; STEKLAC, D.; PETRŮ, Jana; ZLÁMAL, Tomáš; SADÍLEK, Marek; JANOTA, M. and KORDIK, M.. Influence of machining and heat treatment on deformations of thin-walled bearings.
Metallography XV : selected, peer reviewed papers from the International Symposium on Metallography (Metallography 2013), April 24-26, 2013, Stará Lesná, Slovak Republic. 2016, Vol. 862, no. 1, p. 49-58. ISBN 978-3-03835-740-7.
Detail SADÍLEK, Marek; DUBSKÝ, Jaroslav; SADÍLKOVÁ, Zuzana and PORUBA, Zdeněk. Cutting forces during turning with variable depth of cut. Online.
Perspectives in Science. 2016, Vol. 2016, no. 7, p. 357-363. ISBN 0-000-00000-0. Available from:
http://www.346.vsb.cz/.
Detail ČEP, Robert; MALOTOVÁ, Šárka; PAGÁČ, Marek; SADÍLEK, Marek and LICHOVNÍK, Jiří. Parameters Influence of CO2 Laser on Cutting Quality of Polymer Materials.
Sborník vědeckých prací Vysoké školy báňské - Technické univerzity Ostrava. Řada strojní. 2016, Vol. LXII, no. 1/2016, p. 9-16. ISSN 1210-0471.
Detail BRYCHTA, Petr; SADÍLEK, Marek and BRYCHTA, Josef. The influence of motor skills on measurement accuracy.
Technologické inžinierstvo. 2016, Vol. 13, no. 1, p. 22-23. ISSN 1336-5967.
Detail MRKVICA, Ivan; NESLUSAN, Miroslav; ČEP, Robert and SLÉHA, Vojtěch. PROPERTIES AND COMPARISON OF PVD COATINGS.
Tehnički vjesnik – Technical Gazette. 2016, Vol. 23, no. 2, p. 569-574. ISSN 1330-3651.
Detail CARACH, Jan; HLOCH, Sergej; HLAVAEK, Petr; SCUCKA, Jiri; MARTINEC, Petr; PETRŮ, Jana; ZLÁMAL, Tomáš; ZELENAK, Michal; MONKA, Peter; LEHOCKA, Dominika and KROLCZYK, Jolanta. Tangential turning of Incoloy alloy 925 using abrasive water jet technology.
The international journal of advanced manufacturing technology. 2016, Vol. 82, no. 9-12, p. 1747-1752. ISSN 0268-3768.
Detail MRKVICA, Ivan; JURKO, Jozef and ZABOROVSKI, Tadeusz. Elementary study of the machinability during drilling of stainless steels X2Cr18Ni8.
MECHANIK-Miesiecznik Naukowo-Techniczny. 2015, Vol. 2015, no. 4, p. K111-115. ISSN 0025-6552.
Detail MRKVICA, Ivan; PETRŮ, Jana; SLÉHA, Vojtěch; NESLUŠAN, Miroslav; JUROK, Jozef and PANDA, Anton. Properties of cutting inserts with different PVD coatings.
MM Science Journal. 2015, Vol. 2015, no. June, p. 600-603. ISSN 1803-1269.
Detail PETRŮ, Jana; SCHIFFNER, Jan; ZLÁMAL, Tomáš; SADÍLEK, Marek and STANČEKOVÁ, Dana. Investigations of Cutting Tool Wear While Machining Inconel 718.
Manufacturing Technology. 2015, Vol. 15, no. 3, p. 396-403. ISSN 1213-2489.
Detail ČILIKOVÁ, Mária; MIČIETA, Branislav; NESLUŠAN, Miroslav; ČEP, Robert; MRKVICA, Ivan; PETRŮ, Jana and ZLÁMAL, Tomáš. Prediction of the catastrophic tool failure in hard turning through acoustic emission.
Materiali in tehnologije. 2015, Vol. 49, no. 3, p. 355-363. ISSN 1580-2949.
Detail MRKVICA, Ivan; NESLUŠAN, Miroslav; MIČIETOVÁ, Anna; ČILLIKOVÁ, Mária and MIČIETA, Branislav. Detection of tool breakage during hard turning through acoustic emission at low removal rates.
Measurement. 2015, Vol. 70, no. 1, p. 1-13. ISSN 0263-2241.
Detail PORUBA, Zdeněk; PODEŠVA, Jiří; FRANTIŠEK, Ondřej; FUSEK, Martin; BRÁZDA, Robert and SADÍLEK, Marek. Strength Analysis and Optimization of Welding Robot Mechanism in Emergency Stop State.
Perspectives in Science. 2015, Vol. 7C, no. December 2015, p. 347-352. ISBN 0-000-00000-0.
Detail TICHÁ, Šárka and BOTEK, Jan. THE MODERN MEASUREMENT TECHNOLOGY AND CHECKING OF SHAFTS PARAMETERS.
Technologické inžinierstvo. 2015, Vol. XII, no. 2/2015, p. 28-30. ISSN 1336-5967.
Detail RADVANSKÁ, Agáta; HREHA, Pavol; KNAPČÍKOVÁ, Lucia; PETRŮ, Jana; ZLÁMAL, Tomáš and MONKA, Peter. Influence of focusing tube wear on vibrations and surface roughness.
Tehnički vjesnik – Technical Gazette. 2015, Vol. 22, no. 2, p. 270-278. ISSN 1330-3651.
Detail RADVANSKÁ, Agáta; PETRŮ, Jana; MONKOVÁ, Katarína; ZLÁMAL, Tomáš; HREHA, Pavol; ŠOMŠÁK, Matej; ANDREJ, Andrej and ŠAFRAN, Branimir. Rationalization of manufacturing of plastic injection moulds by abrasive waterjet.
Tehnički vjesnik – Technical Gazette. 2015, Vol. 22, no. 2, p. 521-525. ISSN 1330-3651.
Detail SADÍLEK, Marek; FOJTÍK, František; SADÍLKOVÁ, Zuzana; KOLAŘÍK, Kamil and PETRŮ, Jana. A STUDY OF EFFECTS OF CHANGING THE POSITION OF THE TOOL AXIS TO THE MACHINED SURFACE.
Transactions of Famena. 2015, Vol. 39, no. 2, p. 33-46. ISSN 1333-1124.
Detail PETRŮ, Jana; ZLÁMAL, Tomáš; ČEP, Robert and ČEPOVÁ, Lenka. Technology of Thermal Spray Coating Machining.
International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering. 2014, Vol. 86, no. 1, p. 854-857. ISSN 1307-6892.
Detail JONŠTA, Petr; MARŠÁLEK, Petr; HAVLÍK, Jiří; JONŠTA, Zdeněk and VALÍČEK, Jan. Influence of Spur Gears Hardened Method to Allowable Stress Numbers for Bending.
Key Engineering Materials. Vol. 607. 2014, no. 2014/Apr/09, p. 11-14. ISSN 1013-9826.
Detail ČEP, Robert; JANÁSEK, Adam; PETRŮ, Jana; SADÍLEK, Marek; MOHYLA, Petr; VALÍČEK, Jan; HARNIČÁROVÁ, Marta and CZAN, Andrej. Surface roughness after machining and influence of feed rate on process.
Key engineering materials. Volume 581. 2014, Vol. 581, no. 1, p. 341-347. ISSN 1013-9826.
Detail KOURIL, Karel; ČEP, Robert; JANÁSEK, Adam; KRIZ, Antonin and STANCEKOVA, Dana. Surface Integrity at Reaming Operation by MT3 Head.
Manufacturing Technology. 2014, Vol. 14, no. 2, p. 193-199. ISSN 1213-2489.
Detail KYNCL, Ladislav; SADÍLEK, Marek; ČEP, Robert; PETRŮ, Jana; STANČEKOVÁ, Dana; PROCHÁZKA, Josef and NOVÁČEK, Pavel. Tests of drills during drilling holes into alloy wheels.
Manufacturing Technology. 2014, Vol. 14, no. 4, p. 554-561. ISSN 1213-2489.
Detail PETRŮ, Jana; ZLÁMAL, Tomáš; MRKVICA, Ivan and ČEP, Robert. The effect of thermal shocks on wear of exchangeable sintered carbide inserts during the cutting process.
Manufacturing Technology. 2014, Vol. 14, no. 4, p. 590-596. ISSN 1213-2489.
Detail MOHYLA, Petr; KUBOŇ, Zdeněk; ČEP, Robert and SAMARDZIC, Ivan. Evaluation of Creep Properties of Steel P92 and its Welded Joint.
Metalurgija. 2014, Vol. 53, no. 2, p. 175-178. ISSN 0543-5846.
Detail MOHYLA, Petr; KUBOŇ, Zdeněk; ČEP, Robert; JANÁSEK, Adam and SAMARDZIC, Ivan. Secondary Hardening of Low-Alloyed Creep-Resistant Steel Welds.
Metalurgija. 2014, Vol. 53, no. 1, p. 25-28. ISSN 0543-5846.
Detail SADÍLEK, Marek; KRATOCHVÍL, Jiří; PETRŮ, Jana; ČEP, Robert; ZLÁMAL, Tomáš and STANČEKOVÁ, Dana. Cutting tool wear monitoring with the use of impedance layers.
Tehnički vjesnik – Technical Gazette. 2014, Vol. 3, no. 21, p. 639-644. ISSN 1330-3651.
Detail MRKVICA, Ivan; JURKO, Jozef; PANDA, Anton and BEHÚN, Marcel. Prediction of selected aspects of machinability of austenitic stainless steels.
Advanced Materials Research. 2013, Vol. 739, no. 739, p. 206-209. ISSN 1022-6680.
Detail JANČÍKOVÁ, Zora; KOŠTIAL, Pavol; BAKOŠOVÁ, Dana; SEIDL, David; DAVID, Jiří; VALÍČEK, Jan and HARNIČÁROVÁ, Marie. Neural Model for Prediction of Tires Eigenfrequencies.
Advanced Structured Materials. Volume 32. 2013, Vol. 41, no. 1, p. 1-11. ISSN 1869-8433.
Detail MRKVICA, Ivan; KONDERLA, Ryszard; JURKO, Jozef; PANDA, Anton and NESLUŠAN, Miroslav. Force load of cutting tool by turning of nickel alloy Inconel 718 with sintered carbide insert.
Applied Mechanics and Materials. Volume 409-410. 2013, Vol. 372, no. 372, p. 441-444. ISSN 1660-9336.
Detail JANČÍKOVÁ, Zora; KOŠTIAL, Pavol; RUŽIAK, Ivan; VALÍČEK, Jan; FRYDRÝŠEK, Karel; PUCHKÝ, Richard and FARKAŠOVÁ, Martina. Thermo-Mechanical Analysis of Rubber Compounds Filled by Carbon Nanotubes.
Defect and Diffusion Forum. VII. 2013, Vol. 336, no. 1, p. 1-10. ISSN 1012-0386.
Detail KOŠTIAL, Pavol; BAKOŠOVÁ, D; JANČÍKOVÁ, Zora; RUŽIAK, Ivan and VALÍČEK, Jan. Thermo-mechanical analysis of rubber compounds filled by carbon nanotubes.
Deffect and Diffusion Forum. 2013, Vol. 336, no. 1, p. 1-10. ISSN 1662-9507.
Detail JANČÍKOVÁ, Zora; KOŠTIAL, Pavol; BAKOŠOVÁ, Dana; RUŽIAK, Ivan; FRYDRÝŠEK, Karel; VALÍČEK, Jan; FARKAŠOVÁ, Martina and PUCHKÝ, Richard. The Study of Electrical Transport in Rubber Blends Filled by Single Wall Carbon Nanotubes.
Journal of Nano Research. 2013, Vol. 16, no. 21, p. 1-6. ISSN 1662-5250.
Detail MRKVICA, Ivan; NESLUŠAN, Miroslav and MIČIETOVÁ, Anna. Study of elastic deformations in hard turning.
Key Engineering Materials. Volume 592-593. 2013, Vol. 581, no. 581, p. 194-201. ISSN 1013-9826.
Detail MRKVICA, Ivan and JANOŠ, Miroslav. Comparison of round insert´s lifetime when milling Inconel 718.
Key Engineering Materials. Volume 592-593. 2013, Vol. 581, no. 581, p. 26-31. ISSN 1013-9826.
Detail ČEP, Robert; JANÁSEK, Adam; PETRŮ, Jana; ČEPOVÁ, Lenka; CZÁN, Andrej and VALÍČEK, Jan. Hard machinable machining of cobalt-based superalloy.
Manufacturing Technology. 2013, Vol. 13, no. 2, p. 142-147. ISSN 1213-2489.
Detail MRKVICA, Ivan; KONDERLA, Ryszard; NESLUŠAN, Miroslav; JURKO, Jozef and PANDA, Anton. Cutting forces by turning of Inconel 718 with inserts from different materials.
Manufacturing Technology. 2013, Vol. 13, no. 4, p. 499-504. ISSN 1213-2489.
Detail SADÍLEK, Marek; ČEP, Robert; SADÍLKOVÁ, Zuzana; VALÍČEK, Jan and PETŘKOVSKÁ, Lenka. Increasing tool life in turning with variable depth of cut.
Materiali in tehnologije. 2013, Vol. 47, no. 2, p. 199-203. ISSN 1580-2949.
Detail NESLUSAN, Miroslav; MRKVICA, Ivan; ČEP, Robert and CILLIKOVA, Maria. INFLUENCE OF CUTTING SPEED ON INTENSITY OF THE PLASTIC DEFORMATION DURING HARD CUTTING.
Materiali in tehnologije. 2013, Vol. 47, no. NOV-DEC 2013, p. 745-755. ISSN 1580-2949.
Detail KOŠTIAL, Pavol; JANČÍKOVÁ, Zora; VALÍČEK, Jan; HARNIČÁROVÁ, Marta; BAKOŠOVÁ, Dana and ŠPIČKA, Ivo. Artificial Neural Networks Application in Modal Analysis of Tires.
Measurement Science Review. 2013, Vol. 13, no. 5, p. 273-278. ISSN 1335-8871.
Detail TICHÁ, Šárka; SRBA, Ondřej and VAVŘINA, Jan. KALIBRACE 3D TASTERů.
Strojírenská technologie. 2013, Vol. 1, no. 2, p. 125-130. ISSN 1211-4162.
Detail MRKVICA, Ivan; KONDERLA, Ryszard and NESLUŠAN, Miroslav. Silové zatížení nástroje při soustružení niklové slitiny Inconel 718 nástrojem s VBD ze slinutého karbidu.
Strojírenská technologie. 2013, Vol. XVIII, no. 4, p. 258-265. ISSN 1211-4162.
Detail MRKVICA, Ivan and JANOŠ, Miroslav. The milling of material Inconel 718 with indexables cutting inserts from sintered carbide.
Technologické inžinierstvo. 2013, Vol. X, no. 1, p. 9-11. ISSN 1336-5967.
Detail ANTIC, Aco; KOZAK, Drazan; KOSEC, Borut; SIMUNOVIC, Goran; SARIC, Tomislav; KOVACEVIC, Dusan and ČEP, Robert. INFLUENCE OF TOOL WEAR ON THE MECHANISM OF CHIPS SEGMENTATION AND TOOL VIBRATION.
Tehnički vjesnik – Technical Gazette. 2013, Vol. 20, no. 1, p. 105-112. ISSN 1330-3651.
Detail ČEP, Robert; JANÁSEK, Adam; ČEPOVÁ, Lenka; PETRŮ, Jana; HLAVATÝ, Ivo; CAR, Zlatan and HATALA, Michal. EXPERIMENTAL TESTING OF EXCHANGEABLE CUTTING INSERTS CUTTING ABILITY.
Tehnički vjesnik – Technical Gazette. 2013, Vol. 20, no. 1, p. 21-26. ISSN 1330-3651.
Detail ČEP, Robert; JANÁSEK, Adam; SLÍVA, Aleš; NESLUŠAN, Miroslav and BINDER, Martin. EXPERIMENTAL TOOL LIFE TESTS OF INDEXABLE INSERTS FOR STAINLESS STEEL MACHINING.
Tehnički vjesnik – Technical Gazette. 2013, Vol. 20, no. 6, p. 933-940. ISSN 1330-3651.
Detail SADÍLEK, Marek; KRATOCHVÍL, Jiří and PETŘKOVSKÁ, Lenka. Turning Thin-Walled Workpieces with Variable Depth of Cut.
World Academy of Science, Engineering and Technology. 2013, Vol. 1, no. 1, p. 1232–1236. ISSN 2010-376X.
Detail