PAVLÍK, Jan; SADÍLEK, Marek and TROCHTA, Miroslav. THE THICKNESS OF THE MARKING COMPOUND USED FOR CREATING REAL CONTACT PATTERNS ONTHE GEARING. In:
60th International Conference of Machine Design Departments : conference abstracts : September 10th-13th 2019, Hnanice, Czech Republic. 2019. p. 156-160. ISBN 0-000-00000-0.
Detail MOSLER, Václav; HAVLÍK, Jiří; JANČAR, Lukáš and KUNZOVÁ, Ivana. METHODOLOGY MEASUREMENT OF INCLINATION GEARS IN OPERATION. In:
60th International Conference of Machine Design Departments : conference abstracts : September 10th-13th 2019, Hnanice, Czech Republic. 2019. ISBN 0-000-00000-0.
Detail ZELINKA, Jan; ČEPOVÁ, Lenka; GAPINSKI, Bartosz; ČEP, Robert; MIZERA, Ondřej and HRUBÝ, Radek. The Effect of a Stylus Tip on Roundness Deviation with Different Roughness. In:
ADVANCES IN MANUFACTURING II, VOL 5 - METROLOGY AND MEASUREMENT SYSTEMS. 2019. p. 147-157. ISBN 978-3-030-18682-1.
Detail MIZERA, Ondřej; ČEPOVÁ, Lenka; SADÍLEK, Marek; ČEP, Robert; HRUBÝ, Radek and ZELINKA, Jan. The Problems of Measuring Selected Geometric Deviations on a CMM After Machining. In:
ADVANCES IN MANUFACTURING II, VOL 5 - METROLOGY AND MEASUREMENT SYSTEMS. 2019. p. 158-171. ISBN 978-3-030-18682-1.
Detail HALAMA, Radim; PAGÁČ, Marek; PAŠKA, Zbyněk; PAVLÍČEK, Pavel and CHEN, Xu. RATCHETING BEHAVIOUR OF 3D PRINTED AND CONVENTIONALLY PRODUCED SS316L MATERIAL. In:
American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP. Volume 8, 2019. 2019. p. 1-6. ISBN 978-0-7918-5901-8.
Detail FUSEK, Martin; PORUBA, Zdeněk; HALAMA, Radim; BĚLÍK, Radomír; FRANTIŠEK, Ondřej; SCHNEIDER, Markus; BIAGINI, Veronica and SADÍLEK, Marek. Influence of loading speed on yield strength value of S235 and C45 steels. In:
Experimental Stress Analysis - 57th International Scientific Conference, EAN 2019 - Conference Proceedings. 2019. p. 102-105. ISBN 978-80-214-5766-9.
Detail MĚSÍČEK, Jakub; PETRŮ, Jana; ZLÁMAL, Tomáš; PAGÁČ, Marek; ŠEDIVÝ, Jiří; VORTEL, Ondřej and DRÁBEK, Lukáš. The use of technology local heating by laser for turning of difficult to machine materials. In:
Lecture Notes in Mechanical Engineering : advances in manufacturing engineering and materials. 2019. p. 290-298. ISBN 978-3-319-99352-2.
Detail RUSZ, Stanislav; ŠVEC, Jiří; HILŠER, Ondřej; ZABYSTRZAN, Rostislav; MAREŠ, Vratislav and KLOS, Marcel. Influence of severe plastic deformation process on mechanical properties of low carbon steel. In:
METAL 2019 : 28th International Conference on Metallurgy and Materials : abstracts : May 22nd-24th 2019, Hotel Voronez I, Brno, Czech Republic, EU. 2019. p. 1962-1967. ISBN 978-80-87294-92-5.
Detail MUSIL, Václav; SADÍLEK, Marek; KRATOCHVÍL, Jiří; ČEP, Robert and LICHOVNÍK, Jiří. Evaluation of finishing machining of stainless steel 1.4307. In:
METAL 2019 : conference proceedings : peer reviewed : 28th International Conference on Metallurgy and Materials : May 22nd-24th 2019, Hotel Voronez I, Brno, Czech Republic, EU. 2019. p. 1103-1109. ISBN 978-80-87294-92-5.
Detail ZELINKA, Jan; SADÍLEK, Marek; SZKANDERA, Pavel; MIZERA, Ondřej and ČEPOVÁ, Lenka. The surface roughness of the machined surface of multiaxial milling. In:
METAL 2019 : conference proceedings : peer reviewed : 28th International Conference on Metallurgy and Materials : May 22nd-24th 2019, Hotel Voronez I, Brno, Czech Republic, EU. 2019. p. 1197-1202. ISBN 978-80-87294-92-5.
Detail ZLÁMAL, Tomáš; MALOTOVÁ, Šárka; SZOTKOWSKI, Tomáš; TREFIL, Antonín and VORTEL, Ondřej. Machining of nickel alloy by cutting tool with prepared cutting edge preparation. In:
METAL 2019 : conference proceedings : peer reviewed : 28th International Conference on Metallurgy and Materials : May 22nd-24th 2019, Hotel Voronez I, Brno, Czech Republic, EU. 2019. p. 1761-1767. ISBN 978-80-87294-92-5.
Detail RUSZ, Stanislav; HILŠER, Ondřej; SZKANDERA, Pavel; ZABYSTRZAN, Rostislav; ŠVEC, Jiří; MAREŠ, Vratislav and KLOS, Marcel. Influence of severe plastic deformation process on mechanical properties of low carbon steel. In:
METAL 2019 : conference proceedings : peer reviewed : 28th International Conference on Metallurgy and Materials : May 22nd-24th 2019, Hotel Voronez I, Brno, Czech Republic, EU. 2019. p. 473-476. ISBN 978-80-87294-92-5.
Detail TILL, Jakub; RUSZ, Stanislav; MICHALSKI, Jakub; ČÍŽEK, Lubomír; TYLŠAR, Stanislav; SALAJKA, Michal; KEDROŇ, Jan; MALANÍK, Karel; DONIC, Tibor and HADASIK, Eugeniusz. Change of geometry of ECAP channel to increase deformation intensity by SPD process of AlMn1Cu and AZ 31 alloys. In:
METAL 2019 : conference proceedings : peer reviewed : 28th International Conference on Metallurgy and Materials : May 22nd-24th 2019, Hotel Voronez I, Brno, Czech Republic, EU. 2019. p. 489-494. ISBN 978-80-87294-92-5.
Detail ZLÁMAL, Tomáš; MALOTOVÁ, Šárka; SZOTKOWSKI, Tomáš; ČEP, Robert and MARINESCU, I.D.. The geometry of grooving tool and its influence on dynamic load system for turning. In:
TRANSCOM 2019 : 13th International Scientific Conference of Young Scientists on Sustainable, Modern and Safe Transport : book of abstracts : High Tatras, Grand Hotel Bellevue, 29 - 31 May 2019, Slovak Republic. 2019. p. 602-609. ISBN 978-80-554-1565-9.
Detail HRUBÝ, Radek; ČEPOVÁ, Lenka; ČEP, Robert; MIZERA, Ondřej and ZELINKA, Jan. Measurement of small complex shapes. In:
Transportation Research Procedia. Volume 40. 2019. p. 251-258. ISBN 0-000-00000-0.
Detail MOHYLA, Petr; STERNADELOVÁ, Kristýna; KREJČÍ, Lucie and PAGÁČ, Marek. Analysis of welded joint properties on a tube manufactured by SLM technology. In:
Zeszyt abstraktów międzynarodowej konferencji Material Technologies in Silesia’ 2019 : 13-16 października 2019, Zawiercie. 2019. p. 107-108. ISBN 978-83-65138-24-8.
Detail MĚSÍČEK, Jakub; SLÍVA, Aleš and PETRŮ, Jana. Využití kompozitních materiálů v dopravních prostředcích. In:
44. mezinárodní konference kateder dopravních, manipulačních, stavebních a zemědělských strojů : Kurdějov 11. až 12.9. 2018. 2018. p. 150-155. ISBN 978-80-214-5644-0.
Detail RADEK, N.; PLISZKA, I.; GADEK-MOSZCZAK, A.; ROLEK, J. and PETRŮ, Jana. Properties of carbide electro-spark coatings after laser processing. In:
AIP Conference Proceedings. Volume 2017. 2018. ISBN 978-0-7354-1735-9.
Detail ŠVEC, Jiří; SZKANDERA, Pavel; RUSZ, Stanislav; HILŠER, Ondřej and PETRŮ, Jana. Refining Structure of Copper by SPD process. In:
IOP Conference Series: Materials Science and Engineering. Volume 461. 2018. ISBN 0-000-00000-0.
Detail SKOTNICOVÁ, Kateřina; BURKHANOV, G.S.; ČEGAN, Tomáš; KOLCHUGINA, N.B.; LUKIN, A.A.; ŽIVOTSKÝ, Ondřej; PROKOFEV, Pavel; KURSA, Miroslav; JUŘICA, Jan; KOSHKID'KO, Y. and DRULIS, H.. Optimizing the microstructure of sintered Nd-Fe-B magnets via the application of scandium hydride. In:
Journal of Physics: Conference Series. Volume 1134. 2018. p. "012055". ISBN 0-000-00000-0.
Detail SAJGALIK, M.; CZANOVA, T.; ZAUSKOVA, L.; DRBUL, M.; SADÍLEK, Marek and VALÍČEK, Jan. Triaxial analysis of residual stress in surface layers after high feed machining using X-ray diffractometer. In:
MATEC Web of Conferences. Volume 137. 2018. p. 1-5. ISBN 978-2-7598-9027-9.
Detail ČEP, Robert; MALOTOVÁ, Šárka; KRATOCHVÍL, Jiří; STANČEKOVÁ, Dana and CZÁN, Andrej. Diagnosis of machine tool with using Renishaw ball-bar system. In:
MATEC Web of Conferences. Volume 157. 2018. p. 1-7. ISBN 0-000-00000-0.
Detail ZLÁMAL, Tomáš; MALOTOVÁ, Šárka; PETRŮ, Jana; BRYTAN, Zbigniew and MUSIL, Václav. The evaluation of the surface quality after laser cutting. In:
MATEC Web of Conferences. Volume 244. 2018. p. 1-7. ISBN 0-000-00000-0.
Detail HAJNYŠ, Jiří; PAGÁČ, Marek; ZLÁMAL, Tomáš; PETRŮ, Jana and KOUSAL, Lukáš. Stiffness of 316L stainless steel support structures proposed for the SLM process. In:
MATEC Web of Conferences. Volume 244. 2018. p. 64-72. ISBN 0-000-00000-0.
Detail KRATOCHVÍL, Jiří; SADÍLEK, Marek and MRAZIK, J. The effect of chip former on power loading of recessing tool. In:
MATEC Web of Conferences. Volume 244. 2018. ISBN 0-000-00000-0.
Detail STRUNG, Václav; SZURMAN, Ivo; POHLUDKA, Martin; PETLÁK, Daniel and VONTOROVÁ, Jiřina. Microstructure and purity of the NiTiZr-based alloys prepared by a plasma metallurgy process. In:
METAL 2018 : conference proceedings : reviewed version : 27th International Conference on Metallurgy and Materials : May 23rd-25th 2018, Hotel Voronez I, Brno, Czech Republic, EU. 2018. p. 1734-1739. ISBN 978-80-87294-84-0.
Detail ZLÁMAL, Tomáš; PETRŮ, Jana; MALOTOVÁ, Šárka; ČEP, Robert and HAJNYŠ, Jiří. The influence of microgeometry of cutting tool on dynamic load of system. In:
METAL 2018 : conference proceedings : reviewed version : 27th International Conference on Metallurgy and Materials : May 23rd-25th 2018, Hotel Voronez I, Brno, Czech Republic, EU. 2018. p. 1795-1800. ISBN 978-80-87294-84-0.
Detail ZEGZULKA, Jiří; JEZERSKÁ, Lucie; HLOSTA, Jakub; VALDEROVÁ, Alice and NEČAS, Jan. Optimization proposal for ferrite magnet production. In:
METAL 2018 : conference proceedings : reviewed version : 27th International Conference on Metallurgy and Materials : May 23rd-25th 2018, Hotel Voronez I, Brno, Czech Republic, EU. 2018. p. 199-204. ISBN 978-80-87294-84-0.
Detail MICHALSKI, Jakub; TILL, Jakub; PETRŮ, Jana; ŠPALEK, František; RUSZ, Stanislav and ŠVEC, Jiří. The effect of severe plastic deformation on the mechanical properties and structure of brass. In:
METAL 2018 : conference proceedings : reviewed version : 27th International Conference on Metallurgy and Materials : May 23rd-25th 2018, Hotel Voronez I, Brno, Czech Republic, EU. 2018. p. 419-425. ISBN 978-80-87294-84-0.
Detail TILL, Jakub; MICHALSKI, Jakub; PETRŮ, Jana and ŠPALEK, František. Utilization of the process of severe plastic deformation in increasing the quality of the CU sheet metal strip. In:
METAL 2018 : conference proceedings : reviewed version : 27th International Conference on Metallurgy and Materials : May 23rd-25th 2018, Hotel Voronez I, Brno, Czech Republic, EU. 2018. p. 487-494. ISBN 978-80-87294-84-0.
Detail MUSIL, Václav; SADÍLEK, Marek; ČEP, Robert; ČEPOVÁ, Lenka; KRATOCHVÍL, Jiří and KUŠNÍR, Lukáš. Decreasing the surface roughness of the seating surfaces of ball valves. In:
METAL 2018 : conference proceedings : reviewed version : 27th International Conference on Metallurgy and Materials : May 23rd-25th 2018, Hotel Voronez I, Brno, Czech Republic, EU. 2018. p. 801-807. ISBN 978-80-87294-84-0.
Detail PAGÁČ, Marek; HAJNYŠ, Jiří; MALOTOVÁ, Šárka; ZLÁMAL, Tomáš and PETRŮ, Jana. The influence of the laser power on the utility properties of the surface roughness parameter of the overhangs during the SLM proces. In:
METAL 2018 : conference proceedings : reviewed version : 27th International Conference on Metallurgy and Materials : May 23rd-25th 2018, Hotel Voronez I, Brno, Czech Republic, EU. 2018. p. 814-819. ISBN 978-80-87294-84-0.
Detail SZOTKOWSKI, Tomáš and MRKVICA, Ivan. JIG design for disassembly of undercarriage component. In:
METAL 2018 : conference proceedings : reviewed version : 27th International Conference on Metallurgy and Materials : May 23rd-25th 2018, Hotel Voronez I, Brno, Czech Republic, EU. 2018. p. 879-884. ISBN 978-80-87294-84-0.
Detail KUTIOVÁ, Kristýna and MĚSÍČEK, Jakub. NEDESTRUKTIVNÍ TESTOVÁNÍ RÁMU VOZU FORMULA STUDENT. In:
QUAERE: recenzovaný sborník příspěvků Interdisciplinární mezinárodní vědecké konference doktorandů a odborných asistentů QUAERE 2018 : 27.-29. června 2018, Hradec Králové, Česká republika = Proceedings of the International Scientific Conference for Ph.D. students and assistans - QUAERE 2018 : June 27-29, 2018, Hradec Králové, The Czech Republic. Roč. VIII. 2018. p. 1454-1462. ISBN 978-80-87952-26-9.
Detail ČEPOVÁ, Lenka; KOVÁČIKOVÁ, Andrea; SADÍLEK, Marek and ČEP, Robert. GRR analysis and its graphical and numerical outputs. In:
WMSCI 2018 - 22nd World Multi-Conference on Systemics, Cybernetics and Informatics, Proceedings. 2018. p. 43-47. ISBN 978-1-941763-82-7.
Detail SADÍLEK, Marek; ČEPOVÁ, Lenka and ČEP, Robert. Increasing accuracy during milling on turn-milling centers. In:
WMSCI 2018 - 22nd World Multi-Conference on Systemics, Cybernetics and Informatics, Proceedings. 2018. p. 90-95. ISBN 978-1-941763-82-7.
Detail ŠMACH, Jiří; ŠOFER, Michal; ČEPOVÁ, Lenka and HALAMA, Radim. Problematics of twin-disc wear resistance tests for selected wheel rim materials. In:
Experimental Stress Analysis 2017: 55th international scientific conference : May 30th - June 1st, 2017, Nový Smokovec, Slovakia : book of extended abstracts. 2017. p. 50-56. ISBN 978-80-553-3167-6.
Detail ČEP, Robert; MALOTOVÁ, Šárka; ZLÁMAL, Tomáš; VRBA, Vladimír and BORZAN, Marian. Tracking of the development wear of cutting tools with different geometry during parting-off. In:
MATEC Web of Conferences. Volume 137. 2017. p. 1-8. ISBN 978-2-7598-9027-9.
Detail ČEPOVÁ, Lenka; SADÍLEK, Marek; ČEP, Robert and MIKULOVÁ, Dagmar. Příspěvek k hodnocení funkčních ploch tělesa kulového kohoutu. In:
METAL 2017: conference proceedings : 26th International Conference on Metallurgy and Materials : (reviewed version) : May 24th-26th 2017, Hotel Voroněž I, Brno, Czech Republic, EU. 2017. p. 1207-1213. ISBN 978-80-87294-79-6.
Detail MUSIL, Václav; KRATOCHVÍL, Jiří; ČEP, Robert; SADÍLEK, Marek; ŠPALEK, František and PAGÁČ, Marek. Effective finishing apertures using roughness criterion RA = 0.2 μm. In:
METAL 2017: conference proceedings : 26th International Conference on Metallurgy and Materials : (reviewed version) : May 24th-26th 2017, Hotel Voroněž I, Brno, Czech Republic, EU. 2017. p. 1338-1343. ISBN 978-80-87294-79-6.
Detail RUSZ, Stanislav; KRAUS, Martin; HILŠER, Ondřej; ŠVEC, Jiří; KEDROŇ, Jan; ČÍŽEK, Lubomír; DONIČ, Tibor; TAŃSKI, Tomasz and KREJČÍ, Lucie. Increasing the quality of DC01 steel by drece method. In:
METAL 2017: conference proceedings : 26th International Conference on Metallurgy and Materials : (reviewed version) : May 24th-26th 2017, Hotel Voroněž I, Brno, Czech Republic, EU. 2017. p. 527-532. ISBN 978-80-87294-79-6.
Detail SCHIFFNER, Jan; ZLÁMAL, Tomáš; PETRŮ, Jana and ČEP, Robert. Technology of Machining of Thermal Sprayed Coatings. In:
METAL 2017: conference proceedings : 26th International Conference on Metallurgy and Materials : (reviewed version) : May 24th-26th 2017, Hotel Voroněž I, Brno, Czech Republic, EU. 2017. p. 1444-1449. ISBN 978-80-87294-79-6.
Detail HILŠER, Ondřej; ŠPALEK, František; RUSZ, Stanislav; KUC, Dariusz; HADASIK, Eugeniusz and SNOPIŃSKI, Przemysław. Lithium containing AZ31 magnesium alloy processed by ECAP. In:
METAL 2017: conference proceedings : 26th International Conference on Metallurgy and Materials : (reviewed version) : May 24th-26th 2017, Hotel Voroněž I, Brno, Czech Republic, EU. 2017. p. 1738-1745. ISBN 978-80-87294-79-6.
Detail PAGÁČ, Marek; MALOTOVÁ, Šárka; ZLÁMAL, Tomáš; PETRŮ, Jana and KRATOCHVÍL, Jiří. Evaluation of chosen parameters of surface roughness (microgeometry) on the samples from stainless steel 316L and manufactured by the additive technology SLM. In:
METAL 2017: conference proceedings : 26th International Conference on Metallurgy and Materials : (reviewed version) : May 24th-26th 2017, Hotel Voroněž I, Brno, Czech Republic, EU. 2017. p. 956-961. ISBN 978-80-87294-79-6.
Detail PAGÁČ, Marek; HAJNYŠ, Jiří; PETRŮ, Jana; ZLÁMAL, Tomáš and ŠOFER, Michal. The study of mechanical properties stainless steel 316L after production from metal powder with using additive technology and by method selective laser melting. In:
METAL 2017: conference proceedings : 26th International Conference on Metallurgy and Materials : (reviewed version) : May 24th-26th 2017, Hotel Voroněž I, Brno, Czech Republic, EU. 2017. p. 962-967. ISBN 978-80-87294-79-6.
Detail PIESOVA, Marianna; CZAN, Andrej; SAJGALIK, Michal; CZANOVA, Tatiana and ČEP, Robert. Experimental quantification of the austenitic phase in steels using the Average peak method of x-ray diffractometry. In:
Procedia Engineering. Volume 192. 2017. p. 689-694. ISBN 0-000-00000-0.
Detail KRATOCHVÍL, Jiří; SADÍLEK, Marek and PAGÁČ, Marek. LAYER OF THE TOOL TESTING DURING CUTTING MATERIAL X120MN12. In:
METAL 2016 : 25th Anniversary International Conference on Metallurgy and Materials : list of abstracts : May 25th-27th 2016, Hotel Voroněž I, Brno, Czech Republic, EU. 2016. p. 1096-1102. ISBN 978-80-87294-67-3.
Detail ŠPALEK, František; PETRŮ, Jana; TROCHTA, Miroslav; HAŠOVÁ, Slavomíra and HLOCH, Sergej. DEPENDENCE OF MANUFACTURING PRECISION OF WEDM CUTTING TECHNOLOGY ON POROSITY OF ALUMINUM FOAM. In:
METAL 2016 : 25th Anniversary International Conference on Metallurgy and Materials : list of abstracts : May 25th-27th 2016, Hotel Voroněž I, Brno, Czech Republic, EU. 2016. p. 1534-1539. ISBN 978-80-87294-66-6.
Detail PAGÁČ, Marek; MALOTOVÁ, Šárka; SADÍLEK, Marek; PETRŮ, Jana; ZLÁMAL, Tomáš and KRATOCHVÍL, Jiří. INFLUENCE OF EFFECTIVE MILLING STRATEGIES ON THE RESIDUAL STRESS. In:
METAL 2016 : 25th Anniversary International Conference on Metallurgy and Materials : list of abstracts : May 25th-27th 2016, Hotel Voroněž I, Brno, Czech Republic, EU. 2016. p. 819-824. ISBN 978-80-87294-67-3.
Detail PETRŮ, Jana; SCHIFFNER, Jan; ZLÁMAL, Tomáš; ČEP, Robert; KRATOCHVÍL, Jiří and STANČEKOVÁ, Dana. CHIP BREAKER OF CUTTING TOOL AND ITS INFLUENCE AT DYNAMIC FORCE OF MACHINING TITANIUM ALLOY TI(6)AL(4)V. In:
METAL 2016: conference proceedings : (reviewed version) : 25th Anniversary International Conference on Metallurgy and Materials : May 25th-27th 2016, Hotel Voronez I, Brno, Czech Republic, EU. 2016. p. 855-860. ISBN 978-80-87294-67-3.
Detail PETRŮ, Jana; ZLÁMAL, Tomáš; ČEP, Robert; STANČEKOVÁ, Dana; PAGÁČ, Marek and VORTEL, Ondřej. Mechanisms of cutting insert wear and their influence on cutting ability of the tool during machining of special alloys. In:
3rd International Conference on Manufacturing Engineering and Technology for Manufacturing Growth (METMG 2015) : Proceedings Papers. 2015. p. 36-40. ISBN 978-1-61275-074-3.
Detail THEISZ, Günther; FRYDRÝŠEK, Karel; FOJTÍK, František; KUBÍN, Tomáš; PEČENKA, Luboš; DEMEL, Jiří; MADEJA, Roman; SADÍLEK, Marek; KRATOCHVÍL, Jiří and PLEVA, Leopold. Medial plate for treatment of distal tibia fractures. In:
Experimental Stress Analysis 2015 : 53rd international conference : June 1-4, 2015, Český Krumlov, Czech Republic : book of extended abstracts. 2015. p. 431-437. ISBN 978-80-01-05734-6.
Detail PETRŮ, Jana; SCHIFFNER, Jan; ZLÁMAL, Tomáš; ČEP, Robert; KRATOCHVÍL, Jiří and STANČEKOVÁ, Dana. WEAR PROGRESS OF EXCHANGEABLE CUTTING INSERTS DURING TI(6)AL(4)V ALLOY MACHINING. In:
METAL 2015 : 24th International Conference on Metallurgy and Materials : conference proceedings : June 3rd-5th 2015, Hotel Voroněž I, Brno, Czech Republic, EU. 2015. p. 1147-1155. ISBN 978-80-87294-62-8.
Detail STANČEKOVÁ, Dana; ŠAJGALÍK, Michal; PETRŮ, Jana; NÁPRSTKOVÁ, Nataša and BALÁŽ, Pavol. IMPLEMENTATION OF COATING FOR FAILURE ELIMINATION OF DIAL GAUGES. In:
METAL 2015 : 24th International Conference on Metallurgy and Materials : conference proceedings : June 3rd-5th 2015, Hotel Voroněž I, Brno, Czech Republic, EU. 2015. p. 1162-1169. ISBN 978-80-87294-62-8.
Detail GOLA, Lukáš; VÁCLAVÍK, Vojtěch; DVORSKÝ, Tomáš and VALÍČEK, Jan. Návrh protipovodňové ochrany v katastru obce Bolatice. In:
Aktuální vodohospodářské problémy : konference s mezinárodní účastí : 8.9.-10.9.2014, Hotel Davidův mlýn, Staré Těchanovice. 2014. p. 65-72. ISBN 978-80-248-3541-9.
Detail PETRŮ, Jana; ZLÁMAL, Tomáš; ČEP, Robert and PAVLICA, Marek. The Using of Elements o Lean Production to Increase Efficiency and Competitiveness of Organizations in the Engineering Industry. In:
Fourth International Conference on Industrial Engineering and Operations Management (IEOM 2014) : Bali, Indonesia, January 7-9, 2014. 2014. p. 802-811. ISBN 978-0-9855497-1-8.
Detail GREGUŠOVÁ, Markéta; ŠAJDLEROVÁ, Ivana; ZUSKÁČ, Martin; KEDROŇ, Jan and PETRŮ, Jana. Expanding Knowledge of Students of Engineering Using E-Learning. In:
Fourth International Conference on Industrial Engineering and Operations Management (IEOM 2014) : Bali, Indonesia, January 7-9, 2014. 2014. p. 879-888. ISBN 978-0-9855497-1-8.
Detail PETRŮ, Jana; PETŘKOVSKÁ, Lenka; ZLÁMAL, Tomáš and MRKVICA, Ivan. Resistance of Sintered Carbide Materials against Heat Shocks Induced by Cutting Process. In:
METAL 2014 : 23rd International Conference on Metallurgy and Materials : conference proceedings : May 21st-23rd 2014, hotel Voroněž I, Brno, Czech Republic, EU. 2014. p. 1-6. ISBN 978-80-87294-52-9.
Detail PETŘKOVSKÁ, Lenka; PETRŮ, Jana; KRATOCHVÍL, Jiří and SADÍLEK, Marek. Chip Formation during Milling of Stainless Steels. In:
METAL 2014 : 23rd International Conference on Metallurgy and Materials : conference proceedings : May 21st-23rd 2014, hotel Voroněž I, Brno, Czech Republic, EU. 2014. p. 1-6. ISBN 978-80-87294-52-9.
Detail PAVLICA, Marek and SADÍLEK, Marek. Mechanické testování navrženého lepeného spoje. In:
Mezinárodní konference výrobních technologií při příležitosti 50. výročí založení Katedry obrábění a montáže Fakulty strojní VŠB-TU Ostrava : 3.-5. září 2014, Hotel Bauer, Bílá. 2014. p. 42. ISBN 978-80-248-3518-1.
Detail VÁCLAVÍK, Vojtěch; DVORSKÝ, Tomáš; BŘENEK, Aleš; DAXNER, Jaromír; VALÍČEK, Jan; KUŠNEROVÁ, Milena and BENDOVÁ, Miroslava. Tepelně izolační účinek malty s polyuretanovým plnivem v závislosti na vlhkosti. In:
Životné prostredie - problémy a možnosti riešenia : ovzdušie, voda, poda : zborník publikácií zo IV. ročníka odbornej konferencie s medzinárodnou účasťou : 7.-9.4.2014, Hotel Sorea Titris, Tatranská Lomnica. 2014. p. 128-136. ISBN 978-80-89385-28-7.
Detail ZLÁMAL, Tomáš; PETRŮ, Jana; SADÍLEK, Marek; PAGÁČ, Marek; BRYCHTA, Josef and SUROVSKÝ, Juraj. Durability and Wear of Exchangeable Coated Inserts after Machining the Ni-625 Alloy. In:
5th International Scientific and Expert Conference of the International TEAM Society (Technique, Education, Agriculture & Management) : Prešov, 4th-6th November 2013. 2013. p. 315-319. ISBN 0-000-00000-0.
Detail ČEP, Robert; JANÁSEK, Adam; PETRŮ, Jana and DUPALA, Ondřej. Experimental Testing of Ceramic Cutting Inserts at Irregular Interrupted Cutting Process. In:
IMETI 2013 - 6th International Multi-Conference on Engineering and Technological Innovation, Proceedings 2013. 2013. p. 145-149. ISBN 978-1-936338-92-4.
Detail PETRŮ, Jana; ZLÁMAL, Tomáš; ČEP, Robert; PAGÁČ, Marek and GREPL, Martin. Influence of Strengthening Effect on Machinability of the Welded Inconel 625 and of the Wrought Inconel 625. In:
IMETI 2013 - 6th International Multi-Conference on Engineering and Technological Innovation, Proceedings 2013. 2013. p. 155-159. ISBN 978-1-936338-92-4.
Detail HARNIČÁROVÁ, Marta; VALÍČEK, Jan; ČEP, Robert; PETRŮ, Jana and ČEPOVÁ, Lenka. Surface Integrity Analysis in Laser Beam Cutting Process. In:
METAL 2013 : 22nd International Conference on Metallurgy and Materials : conference proceedings : May 15th - 17th 2013, Hotel Voronez I, Brno Czech Republic, EU [CD-ROM]. 2013. p. 1-6. ISBN 978-80-87294-41-3.
Detail ČEP, Robert; PETRŮ, Jana; ZLÁMAL, Tomáš; VALÍČEK, Jan; HARNIČÁROVÁ, Marta; JANÁSEK, Adam and ČEPOVÁ, Lenka. INFLUENCE OF FEED SPEED ON MACHINED SURFACE QUALITY. In:
METAL 2013 : 22nd International Conference on Metallurgy and Materials : conference proceedings : May 15th - 17th 2013, Hotel Voronez I, Brno Czech Republic, EU [CD-ROM]. 2013. p. 1033-1038. ISBN 978-80-87294-41-3.
Detail KRATOCHVÍL, Jiří and PETŘKOVSKÁ, Lenka. Monitoring the Behavior of Resistive Layers on the Inserts of Nitride Cutting Ceramics During Longitudinal Turning of Steel. In:
METAL 2013 : 22nd International Conference on Metallurgy and Materials : conference proceedings : May 15th - 17th 2013, Hotel Voronez I, Brno Czech Republic, EU [CD-ROM]. 2013. p. 131-131. ISBN 978-80-87294-41-3.
Detail