VÍTEČKOVÁ, Miluše and Antonín VÍTEČEK. Struktury regulátorů PID 2DOF. In:
Automatizácia a riadenie v teórii a praxi : 13. ročník konferencie odborníkov z univerzít, vysokých škôl a praxe : 06. - 08. februára 2019, Stará Lesná, SR. Košice: Technická univerzita v Košiciach, 2019. p. 01/1 – 01/16. ISBN 978-80-553-3250-5.
[Detail] TAUFER, Ivan, Miluše VÍTEČKOVÁ, Antonín VÍTEČEK and Milan JAVŮREK. Normy a praxe. In:
Automatizácia a riadenie v teórii a praxi : 13. ročník konferencie odborníkov z univerzít, vysokých škôl a praxe : 06. - 08. februára 2019, Stará Lesná, SR. Košice: Technická univerzita v Košiciach, 2019. p. 01/1 – 01/16.. ISBN 978-80-553-3250-5.
[Detail] VÍTEČEK, Antonín, Miluše VÍTEČKOVÁ and Ivan TAUFER. Standardní a sériový regulátor PID 2DOF pro integrační soustavy s dopravním zpožděním. In:
Automatizácia a riadenie v teórii a praxi : 13. ročník konferencie odborníkov z univerzít, vysokých škôl a praxe : 06. - 08. februára 2019, Stará Lesná, SR. Košice: Technická univerzita v Košiciach, 2019. p. 15/1 – 15/10. ISBN 978-80-553-3250-5.
[Detail] TŮMA, Jiří, Miroslav PAWLENKA, Miroslav MAHDAL, Václav PAVELKA and Stanislav ŽIARAN. Effect of increasing the signal-to-noise ratio on the active vibration control of the journal bearings. In:
ICSV 2019 : 26th International Congress on Sound and Vibration : 7-11 July 2019, Montréal. Auburn: International Institute of Acoustics and Vibration, 2019. p. 1-4. ISBN 978-1-9991810-0-0.
[Detail] ŽIARAN, Stanislav, B. HUCKO, O. CHLEBO and Jiří TŮMA. Impact of vibro-isolation of technical equipment on structure-borne noise in living areas. In:
ICSV 2019 : 26th International Congress on Sound and Vibration : 7-11 July 2019, Montréal. Auburn: International Institute of Acoustics and Vibration, 2019. p. 1-4. ISBN 978-1-9991810-0-0.
[Detail] PODEŠVA, Petr, Jan GEBAUER, David FOJTÍK and Miroslav MAHDAL. High speed current sensing system for welding. In:
IFAC-PapersOnLine. Volume 52, Issue 27. Amsterdam: Elsevier, 2019. p. 139-144. ISBN 0-000-00000-0.
[Detail] GEBAUER, Jan, Renata WAGNEROVÁ, Pavel SMUTNÝ and Petr PODEŠVA. Controller design for variable pitch propeller propulsion drive. In:
IFAC-PapersOnLine. Volume 52, Issue 27. Amsterdam: Elsevier, 2019. p. 186-191. ISBN 0-000-00000-0.
[Detail] CZEBE, Jiří, Pavel ŠURÁNEK, Jiří TŮMA and Stanislav ŽIARAN. Synchronous data collection measuring system using a single-chip computer. In:
IFAC-PapersOnLine. Volume 52, Issue 27. Amsterdam: Elsevier, 2019. p. 68-73. ISBN 0-000-00000-0.
[Detail] PAPCUN, P., J. CABADAJ, E. KAJATI, D ROMERO, Lenka LANDRYOVÁ, J. VASCAK and I. ZOLOTOVA. Augmented Reality for Humans-Robots Interaction in Dynamic Slotting "Chaotic Storage" Smart Warehouses. In:
IFIP Advances in Information and Communication Technology. Volume 566. Cham: Springer, 2019. p. 633-641. ISBN 978-3-030-29999-6.
[Detail] MAZANCOVÁ, Eva, Pavel KUČERA and Pavel ŠOFER. Hardness of tool steel 55NiCrMoV7 after four different treatment types. In:
METAL 2019 : conference proceedings : peer reviewed : 28th International Conference on Metallurgy and Materials : May 22nd-24th 2019, Hotel Voronez I, Brno, Czech Republic, EU. Ostrava: Tanger, 2019. p. 764-769. ISBN 978-80-87294-92-5.
[Detail] SIKORA, Jan, David FOJTÍK, Jan GEBAUER, Petr PODEŠVA and Milan MIHOLA. Preparation of 3D models of Trucks for Timber Load Analysis. In:
Proceedings of the 2019 20th International Carpathian Control Conference, ICCC 2019. Piscataway: IEEE, 2019. p. 131-134. ISBN 978-1-72810-701-1.
[Detail] SIKORA, Jan, David FOJTÍK, Jiří CZEBE and Milan MIHOLA. Storage kind recognition of truck's timber load. In:
Proceedings of the 2019 20th International Carpathian Control Conference, ICCC 2019. Piscataway: IEEE, 2019. p. 135-138. ISBN 978-1-72810-701-1.
[Detail] SMUTNÝ, Pavel, Marek BABIUCH and Petr FOLTÝNEK. A review of the virtual reality applications in education and training. In:
Proceedings of the 2019 20th International Carpathian Control Conference, ICCC 2019. Piscataway: IEEE, 2019. p. 149-152. ISBN 978-1-72810-701-1.
[Detail] GURÁŠ, Radek and Miroslav MAHDAL. Parking house action subsystem control. In:
Proceedings of the 2019 20th International Carpathian Control Conference, ICCC 2019. Piscataway: IEEE, 2019. p. 153-156. ISBN 978-1-72810-701-1.
[Detail] PAWLENKA, Tomáš and Jaromír ŠKUTA. Electronic steering with force feedback. In:
Proceedings of the 2019 20th International Carpathian Control Conference, ICCC 2019. Piscataway: IEEE, 2019. p. 192-196. ISBN 978-1-72810-701-1.
[Detail] SLADKÁ, Karla and Miluše VÍTEČKOVÁ. 2DOF PI controller tuning for integrating plants with the setting of setpoint weight. In:
Proceedings of the 2019 20th International Carpathian Control Conference, ICCC 2019. Piscataway: IEEE, 2019. p. 197-200. ISBN 978-1-72810-701-1.
[Detail] GEBAUER, Jan, Petr PODEŠVA, David FOJTÍK and Miroslav MAHDAL. The welding current and voltage smart sensor. In:
Proceedings of the 2019 20th International Carpathian Control Conference, ICCC 2019. Piscataway: IEEE, 2019. p. 220-224. ISBN 978-1-72810-701-1.
[Detail] GEORGE, Geena Alexander and Lenka LANDRYOVÁ. Interaction between human and AI systems - When automated systems move towards autonomous. In:
Proceedings of the 2019 20th International Carpathian Control Conference, ICCC 2019. Piscataway: IEEE, 2019. p. 283-288. ISBN 978-1-72810-701-1.
[Detail] VÍTEČKOVÁ, Miluše and Antonín VÍTEČEK. Standard, parallel and series two degree of freedom PID controllers. In:
Proceedings of the 2019 20th International Carpathian Control Conference, ICCC 2019. Piscataway: IEEE, 2019. p. 442-445. ISBN 978-1-72810-701-1.
[Detail] VÍTEČEK, Antonín and Miluše VÍTEČKOVÁ. Series two degree of freedom pid controller for integrating plants with time delay. In:
Proceedings of the 2019 20th International Carpathian Control Conference, ICCC 2019. Piscataway: IEEE, 2019. p. 446-449. ISBN 978-1-72810-701-1.
[Detail] BABIUCH, Marek, Petr FOLTÝNEK and Pavel SMUTNÝ. Using the ESP32 microcontroller for data processing. In:
Proceedings of the 2019 20th International Carpathian Control Conference, ICCC 2019. Piscataway: IEEE, 2019. p. 88-93. ISBN 978-1-72810-701-1.
[Detail] CZEBE, Jiří, Pavel ŠURÁNEK, Jiří TŮMA and David FOJTÍK. Finding similarities in laser micrometers scanned data using cross-covariance. In:
Proceedings of the 2019 20th International Carpathian Control Conference, ICCC 2019. Piscataway, New Jersey, USA: Institute of Electrical and Electronics Engineers Inc., 2019. p. 201-204. ISBN 978-1-72810-701-1.
[Detail] JUREK, Martin and Renata WAGNEROVÁ. Mathematical model of real CNC machine. In:
Proceedings of the 2019 20th International Carpathian Control Conference, ICCC 2019. Piscataway, New Jersey, USA: Institute of Electrical and Electronics Engineers Inc., 2019. p. 205-209. ISBN 978-1-72810-701-1.
[Detail] JUREK, Martin and Renata WAGNEROVÁ. Frequency filtering of source images for LASER engravers. In:
Proceedings of the 2019 20th International Carpathian Control Conference, ICCC 2019. Piscataway, New Jersey, USA: Institute of Electrical and Electronics Engineers Inc., 2019. p. 210-214. ISBN 978-1-72810-701-1.
[Detail] TŮMA, Jiří. Longitudinal vibration of the linear piezo actuators. In:
Proceedings of the 2019 20th International Carpathian Control Conference, ICCC 2019. Piscataway, New Jersey, USA: Institute of Electrical and Electronics Engineers Inc., 2019. p. 237-240. ISBN 978-1-72810-701-1.
[Detail] PODEŠVA, Petr and David FOJTÍK. The algorithm for evaluation of data for calibration of the triangulation laser scanner. In:
Proceedings of the 2019 20th International Carpathian Control Conference, ICCC 2019. Piscataway, New Jersey, USA: Institute of Electrical and Electronics Engineers Inc., 2019. p. 659-663. ISBN 978-1-72810-701-1.
[Detail] PAVELKA, Václav and Pavel ŠURÁNEK. Shock response spectrum calculation from container placing. In:
Proceedings of the 2019 20th International Carpathian Control Conference, ICCC 2019. Piscataway, New Jersey, USA: Institute of Electrical and Electronics Engineers Inc., 2019. p. 720-723. ISBN 978-1-72810-701-1.
[Detail] NOSKIEVIČ, Petr. Identification of linear hydraulic actuator using self-excited oscillations. In:
Proceedings of the 2019 20th International Conference on Research and Education in Mechatronics, REM 2019. Piscataway: IEEE, 2019. p. 1-6. ISBN 978-1-5386-9257-8.
[Detail] TŮMA, Jiří, Jiří ŠIMEK, Milada KOZUBKOVÁ, Miroslav MAHDAL and Miroslav PAWLENKA. Actively Controlled Smart Journal Bearings With the Use of Piezoactuators. In:
25th International Congress on Sound and Vibration 2018 (ICSV 25) : Hiroshima Calling : Hiroshima, Japan, 8 - 12 July 2018. Auburn: International Institute of Acoustics and Vibration, 2018. p. 707-714. ISBN 978-1-5108-6845-8.
[Detail] TŮMA, Jiří, Jaromír ŠKUTA, Miroslav MAHDAL and Jaroslav LOS. Piezoaktuátory a piezomotory. In:
DIAGO 2018: technická diagnostika strojů a výrobních zařízení : 37. mezinárodní vědecká konference : Orea Resort Devět Skal, Sněžné - Milovy. Ostrava: Asociace technických diagnostiků ČR, 2018. p. 1-9. ISBN 0-000-00000-0.
[Detail] ŠURÁNEK, Pavel, Jiří CZEBE and Václav PAVELKA. Experimental identification of LTI system using white noise excitation. In:
Engineering Mechanics 2018 : 24th international conference : May 14-17,2018, Svratka, Czech Republic : extended abstracts. Praha: Institute of Theoretical and Applied Mechanics - Czech Academy of Sciences, 2018. p. 833-836. ISBN 978-80-86246-88-8.
[Detail] TŮMA, Jiří, Jiří ŠIMEK and Milada KOZUBKOVÁ. Calculation Of The Fluid Force Acting On The Bearing Journal In The Steady-State Position. In:
Engineering Mechanics 2018 : 24th international conference : May 14-17,2018, Svratka, Czech Republic : extended abstracts. Praha: Institute of Theoretical and Applied Mechanics - Czech Academy of Sciences, 2018. p. 869-872. ISBN 978-80-86246-88-8.
[Detail] ŠOFER, Michal, Petr FERFECKI, Martin FUSEK, Pavel ŠOFER and Dagmar LIČKOVÁ. Numerical and experimental prediction of lamb wave scattering from horizontal notch. In:
Experimental Stress Analysis : 56th international scientific conference : June 5th - June 7th, 2018, Harrachov, Czech Republic : book of extended abstracts. Praha: Czech Society for Mechanics, 2018. p. 398-406. ISBN 978-80-270-4061-2.
[Detail] JANAČOVÁ, D., V. VAŠEK, J. PITEL, Miluše VÍTEČKOVÁ, R. DRGA, J. KŘENEK and O. LÍŠKA. Modeling of the ecological separation process of printed circuit boards. In:
MATEC Web of Conferences. Paříž: EDP Sciences, 2018. p. nestránkováno. ISBN 0-000-00000-0.
[Detail] ŠOFER, Michal, Petr FERFECKI and Pavel ŠOFER. Numerical solution of Rayleigh-Lamb frequency equation for real, imaginary and complex wavenumbers. In:
MATEC Web of Conferences. Volume 157. Paříž: EDP Sciences, 2018. p. nestránkováno. ISBN 0-000-00000-0.
[Detail] ŠOFER, Michal, Petr FERFECKI, Martin FUSEK, Pavel ŠOFER and Renata GNATOWSKA. The Numerical Analysis of the Interaction between the Low-order Lamb Wave Modes and Surface Breaking Cracks. In:
Machine Modelling and Simulations : MMS 2018 : XXIII Polish-Slovak scientific conference : September 4-7, 2018, Rydzyna, Poland : book of abstracts. Poznań: Publishing House of Poznan University of Technology, 2018. p. 1-12. ISBN 978-83-7775-508-2.
[Detail] GREPL, Jan and Lenka LANDRYOVÁ. Using laser scanners. In:
Proceedings of the 2016 17th International Carpathian Control Conference, ICCC 2016. Piscataway: IEEE, 2018. p. 218-221. ISBN 978-1-4673-8606-7.
[Detail] PAWLENKA, Miroslav and Miroslav MAHDAL. CompactRIO control system for active vibration control. In:
Proceedings of the 2018 19th International Carpathian Control Conference, ICCC 2018. Piscataway: IEEE, 2018. p. 134-137. ISBN 978-1-5386-4762-2.
[Detail] SLADKÁ, Karla, Jiří CZEBE and Renata WAGNEROVÁ. The 2DOF controller implementation in control system with single-chip computer. In:
Proceedings of the 2018 19th International Carpathian Control Conference, ICCC 2018. Piscataway: IEEE, 2018. p. 228-234. ISBN 978-1-5386-4762-2.
[Detail] NOSKIEVIČ, Petr. Smart Control of the Integrated Hydraulic Actuator. In:
Proceedings of the 2018 19th International Carpathian Control Conference, ICCC 2018. Piscataway: IEEE, 2018. p. 307-311. ISBN 978-1-5386-4762-2.
[Detail] PAWLENKA, Tomáš and Jaromír ŠKUTA. Security System Based on Microcontroller. In:
Proceedings of the 2018 19th International Carpathian Control Conference, ICCC 2018. Piscataway: IEEE, 2018. p. 344-347. ISBN 978-1-5386-4762-2.
[Detail] TŮMA, Jiří. Rotational speed estimation using the discrete Kalman filtering applied to a tacho signal. In:
Proceedings of the 2018 19th International Carpathian Control Conference, ICCC 2018. Piscataway: IEEE, 2018. p. 39-44. ISBN 978-1-5386-4762-2.
[Detail] JUREK, Martin and Renata WAGNEROVÁ. Matlab as CAM software. In:
Proceedings of the 2018 19th International Carpathian Control Conference, ICCC 2018. Piscataway: IEEE, 2018. p. 484-487. ISBN 978-1-5386-4762-2.
[Detail] GEBAUER, Jan and Renata WAGNEROVÁ. Advanced variable pitch propulsion drive controller. In:
Proceedings of the 2018 19th International Carpathian Control Conference, ICCC 2018. Piscataway: IEEE, 2018. p. 51-54. ISBN 978-1-5386-4762-2.
[Detail] NOSKIEVIČ, Petr. Control of Linear Hydraulic Actuator using the full Hydraulic Bridge. In:
Proceedings of the 2018 19th International Conference on Research and Education in Mechatronics, REM 2018. Piscataway: IEEE, 2018. p. 52-57. ISBN 978-1-5386-5413-2.
[Detail] VÍTEČKOVÁ, Miluše, Antonín VÍTEČEK and Dagmar JANÁČOVÁ. Robust stability and desired model method. In:
Proceedings of the 29th International Conference on Cybernetics and Informatics, K and I 2018. Piscataway: IEEE, 2018. p. 1-5. ISBN 978-1-5386-4421-8.
[Detail] DANEL, Roman, Tomáš VOJTEK and Jan MINISTR. How to teach programing languages?. In:
Proceedings of the international conference: Liberec Informatics Forum 2018. Liberec: Technická univerzita v Liberci, 2018. p. 31-41. ISBN 978-80-7494-432-1.
[Detail] ZBOŽÍNEK, Vladimír, Petr TOMČÍK, Jiří KULHÁNEK, Petr FOJTÍK, Michal BURÁŇ and Miroslav SUCHÁNEK. Car Axle Testing on Hydropulse. In:
18th International Carpathian Control Conference, ICCC 2017. New York: Institute of Electrical and Electronics Engineers, 2017. p. 1-4. ISBN 978-1-5090-4862-5.
[Detail] GEBAUER, Jan and Renata WAGNEROVÁ. Enhanced UAV propulsion system. In:
18th International Carpathian Control Conference, ICCC 2017. New York: Institute of Electrical and Electronics Engineers, 2017. p. 103-106. ISBN 978-1-5090-4862-5.
[Detail] TŮMA, Jiří, Pavel ŠURÁNEK, Jaroslav LOS and Miroslav MAHDAL. Simulation study of using a cascade of all-pass filters in active vibration control of mechanical structures. In:
18th International Carpathian Control Conference, ICCC 2017. New York: Institute of Electrical and Electronics Engineers, 2017. p. 123-128. ISBN 978-1-5090-4862-5.
[Detail] PAWLENKA, Miroslav and Miroslav MAHDAL. Automatically tunable bandpass filter. In:
18th International Carpathian Control Conference, ICCC 2017. New York: Institute of Electrical and Electronics Engineers, 2017. p. 167-170. ISBN 978-1-5090-4862-5.
[Detail] VÍTEČKOVÁ, Miluše, Antonín VÍTEČEK and Karla SLADKÁ. Controller tuning by desired model method. In:
18th International Carpathian Control Conference, ICCC 2017. New York: Institute of Electrical and Electronics Engineers, 2017. p. 171-176. ISBN 978-1-5090-4862-5.
[Detail] SLADKÁ, Karla and Miroslav MAHDAL. Behaviour of 2DOF controller in the closed-loop control with pneumatic actuator. In:
18th International Carpathian Control Conference, ICCC 2017. New York: Institute of Electrical and Electronics Engineers, 2017. p. 359-362. ISBN 978-1-5090-4862-5.
[Detail] CZEBE, Jiří and Jaromír ŠKUTA. Usage of single-chip computers for control MIMO systems. In:
18th International Carpathian Control Conference, ICCC 2017. New York: Institute of Electrical and Electronics Engineers, 2017. p. 369-374. ISBN 978-1-5090-4862-5.
[Detail] STRAKOŠ, Přemysl and Jiří TŮMA. Mathematical modelling and controller design of inverted pendulum. In:
18th International Carpathian Control Conference, ICCC 2017. New York: Institute of Electrical and Electronics Engineers, 2017. p. 388-393. ISBN 978-1-5090-4862-5.
[Detail] HÝL, Radim and Renata WAGNEROVÁ. Fast development of controllers with Simulink Coder. In:
18th International Carpathian Control Conference, ICCC 2017. New York: Institute of Electrical and Electronics Engineers, 2017. p. 406-411. ISBN 978-1-5090-4862-5.
[Detail] KULHÁNEK, Jiří and Jaromír ŠKUTA. Calibration of MEMs accelerometer with digital output. In:
18th International Carpathian Control Conference, ICCC 2017. New York: Institute of Electrical and Electronics Engineers, 2017. p. 5-7. ISBN 978-1-5090-4862-5.
[Detail] JURÁNEK, Martin, Petr TOMČÍK and Jiří KULHÁNEK. The anti slip control system on electric car independent axle. In:
18th International Carpathian Control Conference, ICCC 2017. New York: Institute of Electrical and Electronics Engineers, 2017. p. 8-10. ISBN 978-1-5090-4862-5.
[Detail] VÍTEČKOVÁ, Miluše and Antonín VÍTEČEK. Metoda požadovaného modelu. In:
Automatizácia a riadenie v teórii a praxi ARTEP 2017 : zborník príspevkov : 15. – 17. februára 2017, Stará Lesná, Slovensko. Košice: Technická univerzita v Košiciach, 2017. p. 22/1-22/21. ISBN 978-80-553-3075-4.
[Detail] TŮMA, Jiří, Miroslav MAHDAL, Jaromír ŠKUTA and Renata WAGNEROVÁ. Sondy přiblížení pro měření orbitů. In:
DIAGO 2017: technická diagnostika strojů a výrobních zařízení : sborník 36. mezinárodní konference : 31.01.-01.02.2017. Ostrava: VŠB - Technická univerzita Ostrava, 2017. p. 278-283. ISBN 0-000-00000-0.
[Detail] ŠOFER, Michal, Petr FERFECKI and Pavel ŠOFER. Experimental construction of Lamb wave dispersion curves in plates. In:
EAN 2017 - 55th Conference on Experimental Stress Analysis 2017. Košice: Technical University of Košice, 2017. p. 242-248. ISBN 978-80-553-3167-6.
[Detail] ŠOFER, Pavel, Michal ŠOFER, Petr FERFECKI and Martin MAREK. Qualitative analysis of different Lamb wave excitation methods. In:
EAN 2017 - 55th Conference on Experimental Stress Analysis 2017. Košice: Technical University of Košice, 2017. p. 256-263. ISBN 978-80-553-3167-6.
[Detail] TŮMA, Jiří, Pavel ŠURÁNEK and Miroslav MAHDAL. All-pass filters as a tool for converting a positive feedback to a negative feedback when controlling weakly damped systems. In:
Engineering Mechanics 2017: 23rd international conference : May 15-18, 2017, Svratka, Czech Republic : book of full texts. Brno: Brno University of Technology, 2017. p. 990-993. ISBN 978-80-214-5497-2.
[Detail] ŠMACH, Jiří, Michal ŠOFER, Lenka ČEPOVÁ and Radim HALAMA. Problematics of twin-disc wear resistance tests for selected wheel rim materials. In:
Experimental Stress Analysis 2017: 55th international scientific conference : May 30th - June 1st, 2017, Nový Smokovec, Slovakia : book of extended abstracts. Košice: Technical University of Košice, 2017. p. 50-56. ISBN 978-80-553-3167-6.
[Detail] TŮMA, Jiří, Jiří ŠIMEK, Miroslav MAHDAL, Miroslav PAWLENKA and Renata WAGNEROVÁ. Piezoelectric actuators in the active vibration control system of journal bearings. In:
Journal of Physics: Conference Series. Volume 870. Bristol: IOP Publishing, 2017. p. nestránkováno. ISBN 0-000-00000-0.
[Detail] FRISCHER, Robert, Ondřej GRYCZ and Robert HLAVICA. Concept Industry 4.0 in Metallurgical Engineering. In:
METAL 2017: conference proceedings : 26th International Conference on Metallurgy and Materials : (reviewed version) : May 24th-26th 2017, Hotel Voroněž I, Brno, Czech Republic, EU. Ostrava: Tanger, 2017. p. 2122-2126. ISBN 978-80-87294-79-6.
[Detail] VALA, David, Radka PAVELKOVÁ, Pavel ŠURÁNEK and Miroslav MAHDAL. Experimental measurement of energy harvesting with backpack. In:
Proceedings of SPIE. Volume 10445. Bellingham: SPIE - The International Society for Optical Engineering, 2017. p. neuvedeno. ISBN 978-1-5106-1354-6.
[Detail] TŮMA, Jiří, Pavel ŠURÁNEK, Jaroslav LOS and Miroslav MAHDAL. Application of an all-pass filter cascade to active vibration control of cantilever beams. In:
Proceedings of the 24th International Congress on Sound and Vibration : July 23-27, 2017, London, United Kingdom. Auburn: International Institute of Acoustics and Vibrations, 2017. p. 443-451. ISBN 978-1-906913-27-4.
[Detail] VÍTEČKOVÁ, Miluše and Antonín VÍTEČEK. Robustní stabilita a metoda požadovaného modelu. In:
Seminar ASR 2017 Instruments and Control 2017 : proceedings : VŠB-TU Ostrava, 28. dubna 2017. Ostrava: VŠB-TUO, Strojní fakulta. Katedra automatizační techniky a řízení, 2017. p. 102-109. ISBN 978-80-248-4040-6.
[Detail] CZEBE, Jiří and Jaromír ŠKUTA. Nasazení jednočipových počítačů pro mnohorozměrové řízení. In:
Seminar ASR 2017 Instruments and Control 2017 : proceedings : VŠB-TU Ostrava, 28. dubna 2017. Ostrava: VŠB-TUO, Strojní fakulta. Katedra automatizační techniky a řízení, 2017. p. 11-23. ISBN 978-80-248-4040-6.
[Detail] VOJTEK, Tomáš. Návrh a realizace 3D tiskárny s inverzní kinematikou. In:
Seminar ASR 2017 Instruments and Control 2017 : proceedings : VŠB-TU Ostrava, 28. dubna 2017. Ostrava: VŠB-TUO, Strojní fakulta. Katedra automatizační techniky a řízení, 2017. p. 110-114. ISBN 978-80-248-4040-6.
[Detail] FOJTÍK, David, Petr PODEŠVA, Milan MIHOLA and Miroslav MAHDAL. Skenování nákladních automobilů a tvorba 3D modelů pro analýzu nákladu dřevěných klád. In:
Seminar ASR 2017 Instruments and Control 2017 : proceedings : VŠB-TU Ostrava, 28. dubna 2017. Ostrava: VŠB-TUO, Strojní fakulta. Katedra automatizační techniky a řízení, 2017. p. 27-34. ISBN 978-80-248-4040-6.
[Detail] GEBAUER, Jan and Renata WAGNEROVÁ. Pohonná jednotka bezpilotního letounu s vektorováním tahu. In:
Seminar ASR 2017 Instruments and Control 2017 : proceedings : VŠB-TU Ostrava, 28. dubna 2017. Ostrava: VŠB-TUO, Strojní fakulta. Katedra automatizační techniky a řízení, 2017. p. 45-50. ISBN 978-80-248-4040-6.
[Detail] BABIUCH, Marek. Aplikace na platformě Windows 10 Mobile pro získávání dat z Arduino sensorů. In:
Seminar ASR 2017 Instruments and Control 2017 : proceedings : VŠB-TU Ostrava, 28. dubna 2017. Ostrava: VŠB-TUO, Strojní fakulta. Katedra automatizační techniky a řízení, 2017. p. 5-10. ISBN 978-80-248-4040-6.
[Detail] HÝL, Radim and Renata WAGNEROVÁ. Aplikace prediktivních metod řízení v elektrárně na biomasu. In:
Seminar ASR 2017 Instruments and Control 2017 : proceedings : VŠB-TU Ostrava, 28. dubna 2017. Ostrava: VŠB-TUO, Strojní fakulta. Katedra automatizační techniky a řízení, 2017. p. 51-62. ISBN 978-80-248-4040-6.
[Detail] PAWLENKA, Miroslav and Jiří TŮMA. Využití platformy CompactRIO pro aktivní tlumení vibrací. In:
Seminar ASR 2017 Instruments and Control 2017 : proceedings : VŠB-TU Ostrava, 28. dubna 2017. Ostrava: VŠB-TUO, Strojní fakulta. Katedra automatizační techniky a řízení, 2017. p. 70-78. ISBN 978-80-248-4040-6.
[Detail] SLADKÁ, Karla and Miroslav MAHDAL. Návrh a se řízení diskrétního 2DOF regulátoru s aplikací na pneumatickém pohonu. In:
Seminar ASR 2017 Instruments and Control 2017 : proceedings : VŠB-TU Ostrava, 28. dubna 2017. Ostrava: VŠB-TUO, Strojní fakulta. Katedra automatizační techniky a řízení, 2017. p. 79-88. ISBN 978-80-248-4040-6.
[Detail] ŠOFER, Pavel. Simulace povrchové ultrazvukové vlny v programu COMSOL. In:
Seminar ASR 2017 Instruments and Control 2017 : proceedings : VŠB-TU Ostrava, 28. dubna 2017. Ostrava: VŠB-TUO, Strojní fakulta. Katedra automatizační techniky a řízení, 2017. p. 89-95. ISBN 978-80-248-4040-6.
[Detail] URBAN, Patrik and Lenka LANDRYOVÁ. Využitie asociačných pravidiel pri anal ýze alarmových trendov. In:
Seminar ASR 2017 Instruments and Control 2017 : proceedings : VŠB-TU Ostrava, 28. dubna 2017. Ostrava: VŠB-TUO, Strojní fakulta. Katedra automatizační techniky a řízení, 2017. p. 96-101. ISBN 978-80-248-4040-6.
[Detail] JELEN, Tomasz and Dušan TEICHMANN. Flight schedule creating based on mathematical model. In:
Aplimat : 15th Conference on Applied Mathematics 2016 : proceedings : February 2-4, 2016, Bratislava, Slovak Republic. Bratislava: Slovak University of Technology, 2016. p. 621-626. ISBN 978-80-227-4531-4.
[Detail] LORENZ, Filip and Michal DORDA. Network synchronization of discrete transport processes using a simulation m odel. In:
Aplimat : 15th Conference on Applied Mathematics 2016 : proceedings : February 2-4, 2016, Bratislava, Slovak Republic. Bratislava: Slovak University of Technology, 2016. p. 755-761. ISBN 978-80-227-4531-4.
[Detail] VÍTEČKOVÁ, Miluše, Antonín VÍTEČEK and Ondřej LÍŠKA. Označení v oblasti automatické regulace. In:
Automatizácia a riadenie v teórii a praxi 2016 : Workshop odborníkov z univerzít, vysokých škól a praxe v oblasti automatizácie a riadenia : Zborník príspevkov, Február 10-12, 2016, Stará Lesná, Slovensko. Košice: Technická univerzita v Košicích, 2016. p. 10/1-10/17. ISBN 978-80-553-2474-6.
[Detail] VÍTEČKOVÁ, Miluše and Antonín VÍTEČEK. Řízení mechanických systémů s neurčitostmi. In:
Automatizácia a riadenie v teórii a praxi 2016 : Workshop odborníkov z univerzít, vysokých škól a praxe v oblasti automatizácie a riadenia : Zborník príspevkov, Február 10-12, 2016, Stará Lesná, Slovensko. Košice: Technická univerzita v Košicích, 2016. p. 11/1-11/9. ISBN 978-80-553-2474-6.
[Detail] TŮMA, Jiří, Jiří ŠIMEK, Miroslav MAHDAL, Jaromír ŠKUTA and Renata WAGNEROVÁ. Aktivně řízené kluzné ložisko pro vysokootáčkové rotory. In:
DIAGO 2016 : technická diagnostika strojů a výrobních zařízení : 35. mezinárodní vědecká konference : Hotel Harmonie I, Luhačovice. Ostrava: Asociace technických diagnostiků ČR, 2016. p. 324-329. ISBN 0-000-00000-0.
[Detail] DOBEŠ, Josef, Milada KOZUBKOVÁ and Miroslav MAHDAL. Identification of the noise using mathematical modelling. In:
EPJ Web of Conferences. Volume 114. Paříž: EDP Sciences, 2016. p. 1-7. ISBN 0-000-00000-0.
[Detail] KOZUBKOVÁ, Milada, Marian BOJKO, Jana JABLONSKÁ, Dorota HOMA and Jiří TŮMA. Experimental research of multiphase flow with cavitation in the nozzle. In:
EPJ Web of Conferences. Volume 114. Paříž: EDP Sciences, 2016. p. 1-8. ISBN 0-000-00000-0.
[Detail] TŮMA, Jiří, Pavel ŠURÁNEK, Miroslav MAHDAL and Renata WAGNEROVÁ. Linear piezoactuators in systems of the active vibration control. In:
ICSV 2016 - 23rd International Congress on Sound and Vibration: From Ancient to Modern Acoustics. Auburn: International Institute of Acoustics and Vibrations, 2016. p. nestránkováno. ISBN 978-960-99226-2-3.
[Detail] CZEBE, Jiří and Jaromír ŠKUTA. Usage of single-chip computers for data collection and control. In:
Proceedings of the 2016 17th International Carpathian Control Conference, ICCC 2016. Danvers: IEEE, 2016. p. 134-139. ISBN 978-1-4673-8606-7.
[Detail] FOJTÍK, David, Petr PODEŠVA, Miroslav MAHDAL and Milan MIHOLA. Scanning of trucks to produce 3D models for analysis of timber loads. In:
Proceedings of the 2016 17th International Carpathian Control Conference, ICCC 2016. Danvers: IEEE, 2016. p. 194-199. ISBN 978-1-4673-8606-7.
[Detail] FOJTÍK, David, Jiří HORÁK, David KOCICH, Lucie ORLÍKOVÁ and Tomáš INSPEKTOR. Smart geocoding of objects. In:
Proceedings of the 2016 17th International Carpathian Control Conference, ICCC 2016. Danvers: IEEE, 2016. p. 200-205. ISBN 978-1-4673-8606-7.
[Detail] GEBAUER, Jan, David FOJTÍK and Petr PODEŠVA. The developement of the High speed current sensing system. In:
Proceedings of the 2016 17th International Carpathian Control Conference, ICCC 2016. Danvers: IEEE, 2016. p. 210-213. ISBN 978-1-4673-8606-7.
[Detail] HÝL, Radim and Renata WAGNEROVÁ. Design and implementation of cascade control structure for superheated steam temperature control. In:
Proceedings of the 2016 17th International Carpathian Control Conference, ICCC 2016. Danvers: IEEE, 2016. p. 253-258. ISBN 978-1-4673-8606-7.
[Detail] HÝL, Radim and Renata WAGNEROVÁ. Design and realization of embedded model predictive controller with software support. In:
Proceedings of the 2016 17th International Carpathian Control Conference, ICCC 2016. Danvers: IEEE, 2016. p. 259-264. ISBN 978-1-4673-8606-7.
[Detail] JUREK, Martin and Jaromír ŠKUTA. Open-source smart home modules. In:
Proceedings of the 2016 17th International Carpathian Control Conference, ICCC 2016. Danvers: IEEE, 2016. p. 286-290. ISBN 978-1-4673-8606-7.
[Detail] MIMRÁNEK, Jan and Pavel SMUTNÝ. Control of robotic ball using mobile device. In:
Proceedings of the 2016 17th International Carpathian Control Conference, ICCC 2016. Danvers: IEEE, 2016. p. 499-504. ISBN 978-1-4673-8606-7.
[Detail] PAWLENKA, Miroslav and Miroslav MAHDAL. Application of Kalman filter for high rotational speed measurement. In:
Proceedings of the 2016 17th International Carpathian Control Conference, ICCC 2016. Danvers: IEEE, 2016. p. 569-572. ISBN 978-1-4673-8606-7.
[Detail] PODEŠVA, Petr and David FOJTÍK. The method for align and calibration of 2D laser scanning system. In:
Proceedings of the 2016 17th International Carpathian Control Conference, ICCC 2016. Danvers: IEEE, 2016. p. 602-607. ISBN 978-1-4673-8606-7.
[Detail] SLADKÁ, Karla and Marek BABIUCH. Application of control algorithms in.NET Micro Framework Technology. In:
Proceedings of the 2016 17th International Carpathian Control Conference, ICCC 2016. Danvers: IEEE, 2016. p. 684-687. ISBN 978-1-4673-8606-7.
[Detail] SMUTNÝ, Pavel. Different perspectives on classification of the Internet of Things. In:
Proceedings of the 2016 17th International Carpathian Control Conference, ICCC 2016. Danvers: IEEE, 2016. p. 692-696. ISBN 978-1-4673-8606-7.
[Detail] BARANOVÁ, Vladena, Lenka LANDRYOVÁ and Jozef FUTÓ. Key Indicators for the Creation of the TBM Technology Process Model. In:
Proceedings of the 2016 17th International Carpathian Control Conference, ICCC 2016. Piscataway: IEEE, 2016. p. 25-28. ISBN 978-1-4673-8606-7.
[Detail] ŠKUTOVÁ, Jolana and Jan SIKORA. Modeling of event-driven model of production line. In:
Proceedings of the 2016 17th International Carpathian Control Conference, ICCC 2016. Danvers: IEEE, 2016. p. 679-683. ISBN 978-1-4673-8606-7.
[Detail] TŮMA, Jiří, Pavel ŠURÁNEK, Petr FERFECKI, Miroslav MAHDAL and Renata WAGNEROVÁ. Vibration damping of simply supported and fixed beams with the use of piezoactuators. In:
Proceedings of the 2016 17th International Carpathian Control Conference, ICCC 2016. Danvers: IEEE, 2016. p. 757-762. ISBN 978-1-4673-8606-7.
[Detail] URBAN, Patrik and Lenka LANDRYOVÁ. Identification and evaluation of alarm logs from the alarm management system. In:
Proceedings of the 2016 17th International Carpathian Control Conference, ICCC 2016. Danvers: IEEE, 2016. p. 769-774. ISBN 978-1-4673-8606-7.
[Detail] VÍTEČEK, Antonín and Miluše VÍTEČKOVÁ. Control of mechanical systems with uncertainties. In:
Proceedings of the 2016 17th International Carpathian Control Conference, ICCC 2016. Danvers: IEEE, 2016. p. 788-792. ISBN 978-1-4673-8606-7.
[Detail] VÍTEČKOVÁ, Miluše and Antonín VÍTEČEK. 2DOF PID controller tuning for integrating plants. In:
Proceedings of the 2016 17th International Carpathian Control Conference, ICCC 2016. Danvers: IEEE, 2016. p. 793-797. ISBN 978-1-4673-8606-7.
[Detail] TŮMA, Jiří, Jiří ŠIMEK, Miroslav MAHDAL, Jaromír ŠKUTA and Renata WAGNEROVÁ. Actively controlled journal bearing enabling to expand limits of stability. In:
Vibroengineering Procedia. Kaunas: JVE International, 2016. p. 53-58. ISBN 0-000-00000-0.
[Detail] SLADKÁ, Karla and Miluše VÍTEČKOVÁ. Návrh a simulace 2DOF regulátorů. In:
XLI. Seminar ASR '2016 “Instruments and Control” : sborník : April 22, 2016, Ostrava, Czech Republic. Ostrava-Poruba: Vysoká škola báňská - Technická univerzita, Fakulta strojní, 2016. p. 105-116. ISBN 978-80-248-3910-3.
[Detail] URBAN, Patrik and Lenka LANDRYOVÁ. Development and Testing of Algorithm for EEMUA 191. In:
XLI. Seminar ASR '2016 “Instruments and Control” : sborník : April 22, 2016, Ostrava, Czech Republic. Ostrava-Poruba: Vysoká škola báňská - Technická univerzita, Fakulta strojní, 2016. p. 123-127. ISBN 978-80-248-3910-3.
[Detail] VÍTEČKOVÁ, Miluše and Antonín VÍTEČEK. Návrh robustního řízení nelineárních systémů. In:
XLI. Seminar ASR '2016 “Instruments and Control” : sborník : April 22, 2016, Ostrava, Czech Republic. Ostrava-Poruba: Vysoká škola báňská - Technická univerzita, Fakulta strojní, 2016. p. 138-146. ISBN 978-80-248-3910-3.
[Detail] VOJTEK, Tomáš and Roman DANEL. Analýza nástrojů , prostředků a technik pro tvorbu WIS a jejich reálná aplikace. In:
XLI. Seminar ASR '2016 “Instruments and Control” : sborník : April 22, 2016, Ostrava, Czech Republic. Ostrava-Poruba: Vysoká škola báňská - Technická univerzita, Fakulta strojní, 2016. p. 147-162. ISBN 978-80-248-3910-3.
[Detail] BARANOVÁ, Vladena and Lenka LANDRYOVÁ. The Key Performance Indicators of the Technological Processes. In:
XLI. Seminar ASR '2016 “Instruments and Control” : sborník : April 22, 2016, Ostrava, Czech Republic. Ostrava-Poruba: Vysoká škola báňská - Technická univerzita, Fakulta strojní, 2016. p. 20-29. ISBN 978-80-248-3910-3.
[Detail] CZEBE, Jiří and Jaromír ŠKUTA. Návrh řídicího systému pro model Helicopter. In:
XLI. Seminar ASR '2016 “Instruments and Control” : sborník : April 22, 2016, Ostrava, Czech Republic. Ostrava-Poruba: Vysoká škola báňská - Technická univerzita, Fakulta strojní, 2016. p. 30-38. ISBN 978-80-248-3910-3.
[Detail] GEBAUER, Jan, David FOJTÍK and Petr PODEŠVA. The High Speed Current Sensing System. In:
XLI. Seminar ASR '2016 “Instruments and Control” : sborník : April 22, 2016, Ostrava, Czech Republic. Ostrava-Poruba: Vysoká škola báňská - Technická univerzita, Fakulta strojní, 2016. p. 54-61. ISBN 978-80-248-3910-3.
[Detail] HÝL, Radim and Renata WAGNEROVÁ. Implementace prediktivního řízení do PLC systému. In:
XLI. Seminar ASR '2016 “Instruments and Control” : sborník : April 22, 2016, Ostrava, Czech Republic. Ostrava-Poruba: Vysoká škola báňská - Technická univerzita, Fakulta strojní, 2016. p. 68-80. ISBN 978-80-248-3910-3.
[Detail] PAWLENKA, Miroslav and Jiří TŮMA. Automaticky přeladitelný pásmový filtr. In:
XLI. Seminar ASR '2016 “Instruments and Control” : sborník : April 22, 2016, Ostrava, Czech Republic. Ostrava-Poruba: Vysoká škola báňská - Technická univerzita, Fakulta strojní, 2016. p. 97-104. ISBN 978-80-248-3910-3.
[Detail] VÍTEČKOVÁ, Miluše and Antonín VÍTEČEK. 2DOF Controllers Tuning. In:
Automatizácia a riadenie v teórii a praxi. Košice: Technická univerzita, 2015. p. 28/1-28/19. ISBN 978-80-553-1968-1.
[Detail] VÍTEČKOVÁ, Miluše and Antonín VÍTEČEK. Robustní řízení mechanických systémů. In:
Automatizácia a riadenie v teórii a praxi. Košice: Technická univerzita, 2015. p. 29/1-29/11. ISBN 978-80-553-1968-1.
[Detail] TŮMA, Jiří and Petr CZYŽ. Volba časových oken a překrytí pro výpočet spekter širokopásmových signálů. In:
DIAGO 2015 : technická diagnostika strojů a výrobních zařízení : 34. mezinárodní vědecká konference : Hotel Harmonie I, Luhačovice. Ostrava: Asociace technických diagnostiků ČR, 2015. p. 311-316. ISBN 0-000-00000-0.
[Detail] HORÁK, Jiří, Igor IVAN and David FOJTÍK. Time of day dependency of public transport accessibility in the Czech Republic. In:
Lecture Notes in Geoinformation and Cartography. Volume 214. Dordrecht: Kluwer Academic Publishers, 2015. p. 93-108. ISBN 978-3-319-11462-0.
[Detail] WAGNEROVÁ, Renata and Jiří TŮMA. Use of Complex Signals in Modelling of Journal Bearings. In:
MATHMOD 2015 : abstract volume : 8th Vienna International Conference on Mathematical Modelling : February 18-20, 2015, Vienna University of Technology. Vienna: ARGESIM, 2015. p. 520-525. ISBN 978-3-901608-46-9.
[Detail] FOJTÍK, David, Petr PODEŠVA and Jan GEBAUER. Storing High Volumes of Data in MS SQL Server Express. In:
Proceedings of the 2015 16th International Carpathian Control Conference, ICCC 2015. New York: Institute of Electrical and Electronics Engineers, 2015. p. 125 - 128. ISBN 978-1-4799-7370-5.
[Detail] GEBAUER, Jan, David FOJTÍK and Petr PODEŠVA. Modeling of the Electronic Variable Pitch Drive. In:
Proceedings of the 2015 16th International Carpathian Control Conference, ICCC 2015. New York: Institute of Electrical and Electronics Engineers, 2015. p. 138 - 141. ISBN 978-1-4799-7370-5.
[Detail] HOLÍK, Jiří, Lenka LANDRYOVÁ and Dušan TEICHMANN. Decision Support by Dynamic Simulation Method. In:
Proceedings of the 2015 16th International Carpathian Control Conference, ICCC 2015. New York: Institute of Electrical and Electronics Engineers, 2015. p. 165 - 169. ISBN 978-1-4799-7370-5.
[Detail] KULHÁNEK, Jiří and Jaromír ŠKUTA. Design of Education Model with NI LabView. In:
Proceedings of the 2015 16th International Carpathian Control Conference, ICCC 2015. New York: Institute of Electrical and Electronics Engineers, 2015. p. 267 - 270. ISBN 978-1-4799-7370-5.
[Detail] BARANOVÁ, Vladena, Lenka LANDRYOVÁ and Jozef FUTÓ. Quality Indicator Model of Dynamic System Boring Machine – Rock. In:
Proceedings of the 2015 16th International Carpathian Control Conference, ICCC 2015. New York: Institute of Electrical and Electronics Engineers, 2015. p. 29 - 32. ISBN 978-1-4799-7370-5.
[Detail] LORENZ, Filip, Radim FARANA and Dušan TEICHMANN. Network Synchronization of Periodic Multiple Source Flows. In:
Proceedings of the 2015 16th International Carpathian Control Conference, ICCC 2015. New York: Institute of Electrical and Electronics Engineers, 2015. p. 300 - 303. ISBN 978-1-4799-7370-5.
[Detail] NOSKIEVIČ, Petr and Martin BŘEZINA. Simulation and Experimental Testing of Power Assisted Steering. In:
Proceedings of the 2015 16th International Carpathian Control Conference, ICCC 2015. New York: Institute of Electrical and Electronics Engineers, 2015. p. 343-348. ISBN 978-1-4799-7370-5.
[Detail] PAWLENKA, Miroslav and Jaromír ŠKUTA. Use of PLC and PIC for Realization of Intelligent Family House. In:
Proceedings of the 2015 16th International Carpathian Control Conference, ICCC 2015. New York: Institute of Electrical and Electronics Engineers, 2015. p. 374 - 378. ISBN 978-1-4799-7370-5.
[Detail] PROSS, David, Jiří TŮMA, Miroslav MAHDAL and Jaromír ŠKUTA. Sound Power Produced by Piezoactuators at Vibration Control of Journal Bearings. In:
Proceedings of the 2015 16th International Carpathian Control Conference, ICCC 2015. New York: Institute of Electrical and Electronics Engineers, 2015. p. 410-413. ISBN 978-1-4799-7370-5.
[Detail] RADECKÝ, Michal, Jan VYKOPAL and Pavel SMUTNÝ. Analysis of Syntactic Elements and Structure of Web Pages Using Eye-Tracking Technology. In:
Proceedings of the 2015 16th International Carpathian Control Conference, ICCC 2015. New York: Institute of Electrical and Electronics Engineers, 2015. p. 420-425. ISBN 978-1-4799-7370-5.
[Detail] ŠKUTA, Jaromír and Jiří KULHÁNEK. Controll of Car LED Lights by CAN/LIN Bus. In:
Proceedings of the 2015 16th International Carpathian Control Conference, ICCC 2015. New York: Institute of Electrical and Electronics Engineers, 2015. p. 486-489. ISBN 978-1-4799-7370-5.
[Detail] ŠTĚPÁN, Martin, Jiří KULHÁNEK and Renata WAGNEROVÁ. Implementation of ESP Algorithm in LabVIEW cRIO. In:
Proceedings of the 2015 16th International Carpathian Control Conference, ICCC 2015. New York: Institute of Electrical and Electronics Engineers, 2015. p. 507-512. ISBN 978-1-4799-7370-5.
[Detail] ŠURÁNEK, Pavel, Miroslav MAHDAL and Jiří TŮMA. Laboratory Model for Active Vibration Control. In:
Proceedings of the 2015 16th International Carpathian Control Conference, ICCC 2015. New York: Institute of Electrical and Electronics Engineers, 2015. p. 517 – 520. ISBN 978-1-4799-7370-5.
[Detail] TŮMA, Jiří, Miroslav MAHDAL, Jaromír ŠKUTA and Jiří ŠIMEK. Effect of the Controller Gain on Efficiency of Active Vibration Control of Sliding Bearings. In:
Proceedings of the 2015 16th International Carpathian Control Conference, ICCC 2015. New York: Institute of Electrical and Electronics Engineers, 2015. p. 552 - 557. ISBN 978-1-4799-7370-5.
[Detail] URBAN, Patrik and Lenka LANDRYOVÁ. Process Knowledge Building an Optimized Alarm System. In:
Proceedings of the 2015 16th International Carpathian Control Conference, ICCC 2015. New York: Institute of Electrical and Electronics Engineers, 2015. p. 563 - 566. ISBN 978-1-4799-7370-5.
[Detail] URBAN, Patrik and Lenka LANDRYOVÁ. Alarm Processing Analyses Using SPC Tools Based on Real-Time Data Acquired from a Control System. In:
Proceedings of the 2015 16th International Carpathian Control Conference, ICCC 2015. New York: Institute of Electrical and Electronics Engineers, 2015. p. 567 - 570. ISBN 978-1-4799-7370-5.
[Detail] VÍTEČEK, Antonín and Miluše VÍTEČKOVÁ. Robust Control of Mechanical Systems. In:
Proceedings of the 2015 16th International Carpathian Control Conference, ICCC 2015. New York: Institute of Electrical and Electronics Engineers, 2015. p. 575 - 579. ISBN 978-1-4799-7370-5.
[Detail] VÍTEČKOVÁ, Miluše and Antonín VÍTEČEK. Stability and Pole Dominance of Control Systems. In:
Proceedings of the 2015 16th International Carpathian Control Conference, ICCC 2015. New York: Institute of Electrical and Electronics Engineers, 2015. p. 580 - 585. ISBN 978-1-4799-7370-5.
[Detail] HÝL, Radim and Renata WAGNEROVÁ. Internal Model Pre-processing Tool. In:
Proceedings of the 2015 20th International Conference on Process Control (PC) : Štrbské Pleso, Slovakia June 9 - 12, 2015. New York: IEEE, 2015. p. 363-368. ISBN 978-1-4673-6627-4.
[Detail] TŮMA, Jiří, Miroslav MAHDAL, Jaromír ŠKUTA, Renata WAGNEROVÁ and Jiří ŠIMEK. Tests of the prototype of active vibration control for sliding bearings. In:
The 22nd International Congress on Sound and Vibration : book of abstracts : Florence, Italy, 12-16 July, 2015. Vienna: International Institute of Acoustics and Vibration, 2015. p. 175-182. ISBN 978-88-88942-48-3.
[Detail] IVAN, Igor, Jiří HORÁK and David FOJTÍK. Automatizované zpracování jízdních řádů pro hodnocení dopravní dostupnosti – příklady z Evropy a České republiky. In:
VOD 2015 : medzinárodná konferencia o verejnej osobnej doprave : 22.-23. oktober 2015, Bratislava. Bratislava: Kongres studio, 2015. p. 118-124. ISBN 978-80-89565-20-7.
[Detail] VÍTEČKOVÁ, Miluše and Antonín VÍTEČEK. Návrh robustního řízení mechanických systémů. In:
XXXIX. Seminar ASR '2015 “Instruments and Control”. Ostrava: Vysoká škola báňská - Technická univerzita Ostrava, Fakulta strojní, Katedra automatizační techniky a řízení, 2015. p. 104-112. ISBN 978-80-248-3744-4.
[Detail] BARANOVÁ, Vladena, Lenka LANDRYOVÁ and Jozef FUTÓ. The Models of Dynamic System Boring Machine - Rock. In:
XXXIX. Seminar ASR '2015 “Instruments and Control”. Ostrava: Vysoká škola báňská - Technická univerzita Ostrava, Fakulta strojní, Katedra automatizační techniky a řízení, 2015. p. 14-19. ISBN 978-80-248-3744-4.
[Detail] FOJTÍK, David and Petr PODEŠVA. Metodika ukládání a správy velkého množství dat v databázích běžících na SQL Server Express. In:
XXXIX. Seminar ASR '2015 “Instruments and Control”. Ostrava: Vysoká škola báňská - Technická univerzita Ostrava, Fakulta strojní, Katedra automatizační techniky a řízení, 2015. p. 34-37. ISBN 978-80-248-3744-4.
[Detail] HÝL, Radim and Renata WAGNEROVÁ. Návrh regulačního obvodu pro řízení teploty přehřáté páry. In:
XXXIX. Seminar ASR '2015 “Instruments and Control”. Ostrava: Vysoká škola báňská - Technická univerzita Ostrava, Fakulta strojní, Katedra automatizační techniky a řízení, 2015. p. 38-48. ISBN 978-80-248-3744-4.
[Detail] JANEČKA, Patrik and Jiří TŮMA. SSL – Functional Prototyp. In:
XXXIX. Seminar ASR '2015 “Instruments and Control”. Ostrava: Vysoká škola báňská - Technická univerzita Ostrava, Fakulta strojní, Katedra automatizační techniky a řízení, 2015. p. 49-54. ISBN 978-80-248-3744-4.
[Detail] BABIUCH, Marek. Vývoj aplikací na platformě .NET Gadgeteer. In:
XXXIX. Seminar ASR '2015 “Instruments and Control”. Ostrava: Vysoká škola báňská - Technická univerzita Ostrava, Fakulta strojní, Katedra automatizační techniky a řízení, 2015. p. 5-13. ISBN 978-80-248-3744-4.
[Detail] LORENZ, Filip and Dušan TEICHMANN. Coordination of periodic multiple source transport processes in selected nodes of network. In:
XXXIX. Seminar ASR '2015 “Instruments and Control”. Ostrava: Vysoká škola báňská - Technická univerzita Ostrava, Fakulta strojní, Katedra automatizační techniky a řízení, 2015. p. 55-59. ISBN 978-80-248-3744-4.
[Detail] URBAN, Patrik and Lenka LANDRYOVÁ. Analysing Alarm and Event Data From a Process and Control System. In:
XXXIX. Seminar ASR '2015 “Instruments and Control”. Ostrava: Vysoká škola báňská - Technická univerzita Ostrava, Fakulta strojní, Katedra automatizační techniky a řízení, 2015. p. 91-96. ISBN 978-80-248-3744-4.
[Detail] VASILEV, Andrey and Renata WAGNEROVÁ. Linear Control of the Inverted Pendulum Mechanism. In:
XXXIX. Seminar ASR '2015 “Instruments and Control”. Ostrava: Vysoká škola báňská - Technická univerzita Ostrava, Fakulta strojní, Katedra automatizační techniky a řízení, 2015. p. 97-103. ISBN 978-80-248-3744-4.
[Detail] NEVRLÝ, Josef, Zdeněk NĚMEC and Petr NOSKIEVIČ. Use of matlab/simulink and amesim for simulation of hydraulic recovery of kinetic energy. In:
ANTiM 2014 : 4th International Conferece Application of New Technologies in Management : Belgrade, Serbia 24 - 26 April 2014 : proceedings. Volume 1. Belgrade: Faculty of Business Studies and Law, 2014. p. 701-711. ISBN 978-86-87333-40-6.
[Detail] VÍTEČKOVÁ, Miluše and Antonín VÍTEČEK. Experimentální metody seřízení analogových regulátorů. In:
Automatizace, regulace a procesy : sborník přednášek z 10. technické konference : ČVUT v Praze, Fakulta strojní, 4.-5.11.2014. Brno: DIMART, 2014. p. 21-28. ISBN 978-80-903844-8-4.
[Detail] VÍTEČKOVÁ, Miluše and Antonín VÍTEČEK. Snadné a rychlé seřizování analogových regulátorů. In:
Automatizace, regulace a procesy : sborník přednášek z 10. technické konference : ČVUT v Praze, Fakulta strojní, 4.-5.11.2014. Brno: DIMART, 2014. p. 29-42. ISBN 978-80-903844-8-4.
[Detail] TŮMA, Jiří, Petr FERFECKI, Pavel ŠURÁNEK and Miroslav MAHDAL. Modelování vlivu parametrického buzení na kmitání vetknutého nosníku. In:
Automatizace, regulace a procesy : sborník přednášek z 10. technické konference : ČVUT v Praze, Fakulta strojní, 4.-5.11.2014. Brno: DIMART, 2014. p. 7-16. ISBN 978-80-903844-8-4.
[Detail] TŮMA, Jiří. Použití Cepster v diagnostice strojů. In:
DIAGO 2014 : technická diagnostika strojů a výrobních zařízení : [sborník 33. mezinárodní konference : 28.-29. ledna 2014, Rožnov pod Radhoštěm]. Ostrava: VŠB - Technická univerzita Ostrava, 2014. p. 1-9. ISBN 0-000-00000-0.
[Detail] ŠIMEK, Jiří, Jiří TŮMA, Jaromír ŠKUTA and Miroslav MAHDAL. Test stand for affecting rotor behaviour by active control of sliding bearings. In:
Dynamics of Machines 2014 : national colloquium with international participation : February 4-5, 2014, Prague, Czech Republic : proceedings. Prague: Institute of Thermomechanics, Academy of Sciences of the Czech Republic, 2014. p. 151-156. ISBN 978-80-87012-50-5.
[Detail] TŮMA, Jiří, Pavel ŠURÁNEK and Miroslav MAHDAL. Simulation study on the forced response of the non-stationary second order system. In:
Dynamics of Machines 2014 : national colloquium with international participation : February 4-5, 2014, Prague, Czech Republic : proceedings. Prague: Institute of Thermomechanics, Academy of Sciences of the Czech Republic, 2014. p. 171-177. ISBN 978-80-87012-50-5.
[Detail] TŮMA, Jiří, Pavel ŠURÁNEK and Miroslav MAHDAL. Vibration Damping of the Cantilever Beam with the use of the Parametric Excitation. In:
ICSV 21 : [the 21th International Congress on Sound and Vibration : abstract book] : 13-17 July 2014, Beijing, China. Beijing: Acoustical Society of China, 2014. p. 1-9. ISBN 978-83-62652-65-5.
[Detail] URBAN, Patrik and Lenka LANDRYOVÁ. Alarm Management at Operators Workstations. In:
IFIP Advances in Information and Communication Technology. Volume 438. New York: Springer New York, Berlin, Heidelberg, Barcelona, Hong Kong, 2014. p. 307-314. ISBN 978-3-662-44738-3.
[Detail] VÍTEČKOVÁ, Miluše and Antonín VÍTEČEK. Dominantnost pólů u metody SIMC. In:
Kybernetika a informatika '14 : medzinárodná konferencia organizovaná SSKI pri SAV s Fakultou elektrotechniky a informatiky STU v Bratislave : 5.-8. február 2014, Oščadnica, Slovenská republika. Bratislava: Slovenská technická univerzita, 2014. p. 22-27. ISBN 978-80-227-4122-4.
[Detail] VÍTEČKOVÁ, Miluše and Antonín VÍTEČEK. Využití principu argumentu v regulaci. In:
Principia cybernetica 2014 : recenzovaný zborník vedeckých prác ... : Bratislava a Kočovce, Slovenská republika, 3.-5.09.2014. Bratislava: Slovenská technická univerzita, 2014. p. 16-22. ISBN 978-80-227-4220-7.
[Detail] BABIUCH, Marek. .Net Micro Framework gadgeteer measurement applications development. In:
Proceedings of the 2014 15th International Carpathian Control Conference, ICCC 2014. Los Alamitos: IEEE Computer Society, 2014. p. 10-13. ISBN 978-1-4799-3528-4.
[Detail] FOJTÍK, David. Measurement of the volume of material on the Conveyor Belt measuring of the volume of wood chips during transport on the Conveyor Belt using a laser scanning. In:
Proceedings of the 2014 15th International Carpathian Control Conference, ICCC 2014. Los Alamitos: IEEE Computer Society, 2014. p. 121-124. ISBN 978-1-4799-3528-4.
[Detail] HOLÍK, Jiří and Lenka LANDRYOVÁ. Control of a general distribution system. In:
Proceedings of the 2014 15th International Carpathian Control Conference, ICCC 2014. Los Alamitos: IEEE Computer Society, 2014. p. 153-156. ISBN 978-1-4799-3528-4.
[Detail] BARANOVÁ, Vladena, Lenka LANDRYOVÁ and Jozef FUTÓ. An application of multivariate planning methods in determining KPIs of rock disintegration process. In:
Proceedings of the 2014 15th International Carpathian Control Conference, ICCC 2014. Los Alamitos: IEEE Computer Society, 2014. p. 19-22. ISBN 978-1-4799-3528-4.
[Detail] LIČEV, Lačezar, Jan TOMEČEK and Marek BABIUCH. Object Recognition for Industrial Image. In:
Proceedings of the 2014 15th International Carpathian Control Conference, ICCC 2014. Los Alamitos: IEEE Computer Society, 2014. p. 320-325. ISBN 978-1-4799-3528-4.
[Detail] NÁDVORNÍK, Jan and Pavel SMUTNÝ. Remote control robot using Android mobile device. In:
Proceedings of the 2014 15th International Carpathian Control Conference, ICCC 2014. Los Alamitos: IEEE Computer Society, 2014. p. 373-378. ISBN 978-1-4799-3528-4.
[Detail] NOSKIEVIČOVÁ, Darja, Miroslav MAHDAL and Kateřina BRODECKÁ. SW Support for CCC and CQC Control Charts. In:
Proceedings of the 2014 15th International Carpathian Control Conference, ICCC 2014. Los Alamitos: IEEE Computer Society, 2014. p. 387-392. ISBN 978-1-4799-3528-4.
[Detail] PODEŠVA, Petr, David FOJTÍK and Jan GEBAUER. Automation of measurement and data collection for gas filling line. In:
Proceedings of the 2014 15th International Carpathian Control Conference, ICCC 2014. Los Alamitos: IEEE Computer Society, 2014. p. 442 - 445. ISBN 978-1-4799-3528-4.
[Detail] PODEŠVA, Petr and David FOJTÍK. Calibration of 2D scanner with nonlinearities. In:
Proceedings of the 2014 15th International Carpathian Control Conference, ICCC 2014. Los Alamitos: IEEE Computer Society, 2014. p. 446-449. ISBN 978-1-4799-3528-4.
[Detail] PODEŠVA, Petr and David FOJTÍK. The system for measuring deformations during welding. In:
Proceedings of the 2014 15th International Carpathian Control Conference, ICCC 2014. Los Alamitos: IEEE Computer Society, 2014. p. 450 - 453. ISBN 978-1-4799-3528-4.
[Detail] RADECKÝ, Michal and Pavel SMUTNÝ. Evaluating user reaction to user interface element using eye-tracking technology. In:
Proceedings of the 2014 15th International Carpathian Control Conference, ICCC 2014. Los Alamitos: IEEE Computer Society, 2014. p. 475-480. ISBN 978-1-4799-3528-4.
[Detail] ŠKUTA, Jaromír. The control unit with wireless interfaces for CNC model. In:
Proceedings of the 2014 15th International Carpathian Control Conference, ICCC 2014. Los Alamitos: IEEE Computer Society, 2014. p. 570 - 573. ISBN 978-1-4799-3528-4.
[Detail] ŠKUTOVÁ, Jolana. A web based application using Matlab Builder NE for the analysis of linear systems. In:
Proceedings of the 2014 15th International Carpathian Control Conference, ICCC 2014. Los Alamitos: IEEE Computer Society, 2014. p. 574 - 577. ISBN 978-1-4799-3528-4.
[Detail] ŠURÁNEK, Pavel, Miroslav MAHDAL and Jiří TŮMA. Modelling and simulation of an active damped structure. In:
Proceedings of the 2014 15th International Carpathian Control Conference, ICCC 2014. Los Alamitos: IEEE Computer Society, 2014. p. 588 - 591. ISBN 978-1-4799-3528-4.
[Detail] TŮMA, Jiří, Pavel ŠURÁNEK, Miroslav MAHDAL and Marek BABIUCH. Simulation of the parametric excitation of the cantilever beam vibrations. In:
Proceedings of the 2014 15th International Carpathian Control Conference, ICCC 2014. Los Alamitos: IEEE Computer Society, 2014. p. 619 - 624. ISBN 978-1-4799-3528-4.
[Detail] URBAN, Patrik and Lenka LANDRYOVÁ. A Laboratory Stand for Testing the ABS Unit Model. In:
Proceedings of the 2014 15th International Carpathian Control Conference, ICCC 2014. Los Alamitos: IEEE Computer Society, 2014. p. 625-628. ISBN 978-1-4799-3528-4.
[Detail] VÍTEČKOVÁ, Miluše and Antonín VÍTEČEK. Dominance of poles for desired model method. In:
Proceedings of the 2014 15th International Carpathian Control Conference, ICCC 2014. Los Alamitos: IEEE Computer Society, 2014. p. 665-670. ISBN 978-1-4799-3528-4.
[Detail] LIČEV, Lačezar, Jan TOMEČEK and Marek BABIUCH. FOTOM-NG SYSTEM, ARCHITECTURE, FEATURES. In:
SGEM 2014: 14th GeoConference on INFORMATICS, GEOINFORMATICS AND REMOTE SENSING Conference proceedings Volume II. Sofia: STEF92 Technology Ltd., 2014. p. 185-192. ISBN 978-619-7105-11-7.
[Detail] VÍTEČKOVÁ, Miluše and Antonín VÍTEČEK. Dominantnost pólů regulačního obvodu. In:
XXXVIII. Seminar ASR '2014 "Instruments and Control" : Ostrava, April 25, 2014. Ostrava: VŠB - Technical University of Ostrava, 2014. p. 142-151. ISBN 978-80-248-3398-9.
[Detail] TŮMA, Jiří, Miroslav MAHDAL and Pavel ŠURÁNEK. Stability of the Active Vibration Control of Cantilever Beams. In:
ICOVP 2013 : 11th International Conference on Vibration Problems : Lisbon, Portugal, 9-12 September 2013 : book of abstracts. Lisboa: APMTAC, 2013. p. 1-10. ISBN 978-989-96264-4-7.
[Detail] ŠURÁNEK, Pavel and Jiří TŮMA. Experiments with the Active Vibration Control of s Cantilever Beam. In:
ICOVP 2013 : 11th International Conference on Vibration Problems : Lisbon, Portugal, 9-12 September 2013 : book of abstracts. Lisboa: APMTAC, 2013. p. 1-7. ISBN 978-989-96264-4-7.
[Detail] HOLÍK, Jiří and Lenka LANDRYOVÁ. Universal simulation model in Witness software for verification and following optimization of the handling equipment. In:
IFIP Advances in Information and Communication Technology. Volume 397. London: Springer, 2013. p. 445-451. ISBN 978-3-642-40351-4.
[Detail] KUBIČKO, Peter, Lenka LANDRYOVÁ, Roman MIHAL and Iveta ZOLOTOVÁ. Measurement, Classification and Evaluation of the Innovation Process and the Identification of Indicators in Relation to the Performance Assessment of Company’s Innovation Zones. In:
IFIP Advances in Information and Communication Technology. Volume 397. London: Springer, 2013. p. 661-668. ISBN 978-3-642-40351-4.
[Detail] LORENZ, Filip, Dušan TEICHMANN and Michal DORDA. Periodic Timetable of Routes with Closed Scheduling Vehicles and Time Coordination in One Point Optimization Model. In:
Mathematical Methods in Economics 2013 : 31st international conference : 11-13 September 2013, Jihlava, Czech Republic. Jihlava: College of Polytechnics Jihlava, 2013. p. 541 - 545. ISBN 978-80-87035-76-4.
[Detail] TEICHMANN, Dušan, Michal DORDA, Jindřich FRIČ and Filip LORENZ. Optimal Localization of Investment Means for Increasing Networks Capacity in Indeterminate Financial Conditions. In:
Mathematical Methods in Economics 2013 : 31st international conference : 11-13 September 2013, Jihlava, Czech Republic. Jihlava: College of Polytechnics Jihlava, 2013. p. 933 - 938. ISBN 978-80-87035-76-4.
[Detail] BARANOVÁ, Vladěna, Lenka LANDRYOVÁ and Jozef FUTÓ. Process Capability Index as an Indicator of Input Signal Quality of the Rock Disintegration Process. In:
Proceedings of the 2013 14th International Carpathian Control Conference (ICCC). New York: IEEE, 2013. p. 1-4. ISBN 978-1-4673-4490-6.
[Detail] MAHDAL, Miroslav, Jaroslav LOS and Jaromír ZAVADIL. Verification Method of Rotors Instability Measurement. In:
Proceedings of the 2013 14th International Carpathian Control Conference (ICCC). New York: IEEE, 2013. p. 228 - 231. ISBN 978-1-4673-4490-6.
[Detail] NOSKIEVIČ, Petr. Control of the Hydraulic Drive Using Embedded Control System. In:
Proceedings of the 2013 14th International Carpathian Control Conference (ICCC). New York: IEEE, 2013. p. 255-260. ISBN 978-1-4673-4490-6.
[Detail] STANÍČEK, Petr, Lukáš RICHTR and Radim FARANA. Rating Web Sites Combining of Heuristic Methods with Numerical Linear Algebra. In:
Proceedings of the 2013 14th International Carpathian Control Conference (ICCC). New York: IEEE, 2013. p. 356 - 362. ISBN 978-1-4673-4490-6.
[Detail] STŘÍBNÝ, Martin and Pavel SMUTNÝ. Using HTML5 Web Interface for Visualization and Control System. In:
Proceedings of the 2013 14th International Carpathian Control Conference (ICCC). New York: IEEE, 2013. p. 363-366. ISBN 978-1-4673-4490-6.
[Detail] ŠURÁNEK, Pavel, Jiří TŮMA and Miroslav MAHDAL. Comparising of Antialiasing Filters in A/D Converters. In:
Proceedings of the 2013 14th International Carpathian Control Conference (ICCC). New York: IEEE, 2013. p. 373-376. ISBN 978-1-4673-4490-6.
[Detail] TŮMA, Jiří. Algorithms for the Vold-Kalman Multiorder Tracking Filter. In:
Proceedings of the 2013 14th International Carpathian Control Conference (ICCC). New York: IEEE, 2013. p. 394-488. ISBN 978-1-4673-4490-6.
[Detail] VÍTEČKOVÁ, Miluše and Antonín VÍTEČEK. Ultimate Parameters in Control Technology. In:
Proceedings of the 2013 14th International Carpathian Control Conference (ICCC). New York: IEEE, 2013. p. 423-427. ISBN 978-1-4673-4490-6.
[Detail] VÍTEČKOVÁ, Miluše and Antonín VÍTEČEK. Simple Digital Controller Tuning. In:
Proceedings of the 2013 14th International Carpathian Control Conference (ICCC). New York: IEEE, 2013. p. 428-431. ISBN 978-1-4673-4490-6.
[Detail] ZAVADIL, Jaromír, Jiří TŮMA, Jan VALÍČEK, Miroslav MAHDAL and Jaroslav LOS. Two Dimensional Fourier Transform using MATLAB. In:
Proceedings of the 2013 14th International Carpathian Control Conference (ICCC). New York: IEEE, 2013. p. 432-435. ISBN 978-1-4673-4490-6.
[Detail] ŠURÁNEK, Pavel, Miroslav MAHDAL, Jiří TŮMA and Jaromír ZAVADIL. Modal Analysis of the Cantilever Beam. In:
Proceedings of the 2013 14th International Carpathian Control Conference (ICCC). New York: IEEE, 2013. p. 467-372. ISBN 978-1-4673-4490-6.
[Detail] DUDA, Tomáš and Antonín VÍTEČEK. Robust Control Algorithms and The State Variable Aggregation Method. In:
Proceedings of the 2013 14th International Carpathian Control Conference (ICCC). New York: IEEE, 2013. p. 49-52. ISBN 978-1-4673-4490-6.
[Detail] FARANA, Radim and Radek SVOBODA. Operational Recommendations for Pyrolysis Unit Cooler Based on Mathematical Model. In:
Proceedings of the 2013 14th International Carpathian Control Conference (ICCC). New York: IEEE, 2013. p. 79-82. ISBN 978-1-4673-4490-6.
[Detail] LIČEV, Lačezar, Marek BABIUCH, Lenka SKANDEROVÁ and Tomáš FABIÁN. FOTOM-NG SYSTEM AND 2D ANIMATION OF MEASUREMENT PROCESS. In:
SGEM 2013 : 13th international multidisciplinary scientific geoconference : GeoConference on Informatics, Geoinformatics and Remote Sensing : 16-22, June, 2013, Albena, Bulgaria : conference proceedings. [Book 2]. Volume I. Sofia: STEF92 Technology Ltd., 2013. p. 115-122. ISBN 978-954-91818-9-0.
[Detail] IVAN, Igor, Jiří HORÁK, David FOJTÍK and Tomáš INSPEKTOR. EVALUATION OF PUBLIC TRANSPORT ACCESSIBILITY AT MUNICIPALITY LEVEL IN THE CZECH REPUBLIC. In:
SGEM 2013 : 13th international multidisciplinary scientific geoconference : GeoConference on Informatics, Geoinformatics and Remote Sensing : 16-22, June, 2013, Albena, Bulgaria : conference proceedings. [Book 2]. Volume I. Sofia: STEF92 Technology Ltd., 2013. p. 527 - 534. ISBN 978-954-91818-9-0.
[Detail] GEBAUER, Jan and Petr KOČÍ. The electronic variable pitch drive. In:
XXXVII. Seminar ASR '2013 "Instruments and Control" : Ostrava, April 26, 2013. Ostrava: VŠB - Technical University of Ostrava, 2013. p. 11-18. ISBN 978-80-248-2967-8.
[Detail] ZAVADIL, Jaromír. Využití dvourozměrné Fourierovy transformace pro odhalování periodicit v obraze. In:
XXXVII. Seminar ASR '2013 "Instruments and Control" : Ostrava, April 26, 2013. Ostrava: VŠB - Technical University of Ostrava, 2013. p. 111-116. ISBN 978-80-248-2967-8.
[Detail] LOS, Jaroslav and Miroslav MAHDAL. Testování vlastností typových piezoaktuátorů. In:
XXXVII. Seminar ASR '2013 "Instruments and Control" : Ostrava, April 26, 2013. Ostrava: VŠB - Technical University of Ostrava, 2013. p. 19-24. ISBN 978-80-248-2967-8.
[Detail] BARANOVÁ, Vladena, Lenka LANDRYOVÁ and Jozef FUTÓ. Application of Evolutionary Planning Box Method in KPI Determination for the Process of Rocks Disintegration. In:
XXXVII. Seminar ASR '2013 "Instruments and Control" : Ostrava, April 26, 2013. Ostrava: VŠB - Technical University of Ostrava, 2013. p. 5-10. ISBN 978-80-248-2967-8.
[Detail] PODEŠVA, Petr and David FOJTÍK. Development of Applications for the STM32 Processors and Their Industrial Deployment. In:
XXXVII. Seminar ASR '2013 "Instruments and Control" : Ostrava, April 26, 2013. Ostrava: VŠB - Technical University of Ostrava, 2013. p. 63-69. ISBN 978-80-248-2967-8.
[Detail] STŘÍBNÝ, Martin. Řídicí jednotka pro model soustruhu. In:
XXXVII. Seminar ASR '2013 "Instruments and Control" : Ostrava, April 26, 2013. Ostrava: VŠB - Technical University of Ostrava, 2013. p. 69-76. ISBN 978-80-248-2967-8.
[Detail] ŠURÁNEK, Pavel, Jiří TŮMA and Miroslav MAHDAL. Modální analýza modelu pro aktivní tlumení vibrací. In:
XXXVII. Seminar ASR '2013 "Instruments and Control" : Ostrava, April 26, 2013. Ostrava: VŠB - Technical University of Ostrava, 2013. p. 77-88. ISBN 978-80-248-2967-8.
[Detail] VÍTEČKOVÁ, Miluše and Antonín VÍTEČEK. Přístupy k volbě vzorkovací periody. In:
XXXVII. Seminar ASR '2013 "Instruments and Control" : Ostrava, April 26, 2013. Ostrava: VŠB - Technical University of Ostrava, 2013. p. 89-102. ISBN 978-80-248-2967-8.
[Detail]